59 -- ACTIVE ISOLATOR/POWER DIVIDER/DIRECTIONAL COUPLER/ETC.

Notice Date

September 10, 2001

Contracting Office

Department of the Air Force, Air Force Materiel Command, AFFTC -- AF Flight Test Center, 5 S WOLFE AVE, Edwards AFB, CA, 93524-1180

ZIP Code

93524-1180

Solicitation Number

Reference-Number-F1EWWX12440600

Response Due

September 24, 2001

Point of Contact

Philip Cheng, Contract Negotiator, Phone 661-277-8658, Fax 661-277-0473, Email Philip.Cheng@edwards.af.mil

Description

This is a combined synopsis/solicitation for commercial items prepared IAW the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotes are being requested and a written solicitation will not be issued. This is a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 97-27 and DFARs Change Notice (DCN) 20001213. Standard Industrial Classification (SIC) code is 3679. Small business size standard is 500. NAICS is 334220. This acquisition is a 100% small business set aside. This purchase will be for one (1) Active Isolator, four (4) Different Power Dividers, two (2) Different Directional Couplers, one (1) Double Balanced Mixer, one (1) Frequency Doubler, and one (1) Variable Attenuator. The salient characteristics for the required equipment are: one (1) Active Isolator-Frequency Limits (MHz) 10-500, DC Supply Power, Nom. +15V@75 mA. General Specifications: Reverse Isolation: 10-100 MHz 40 dB min., 100-300 MHz 30 dB min., 300-500 MHz 23 dB min., Impedance: 50 nom., VSWR: Input 1.65:1 max., Output 1.50:1 max., Insertion Loss/Gain: 0 +- 1 dB (mid-band), Flatness: +-1 dB, Power Input, 1 dB Comp: +- 15 dBm min., Input Intercept Points: 3rd order +26 dBm typ., 2nd Order: +30 dBm typ., DC Supply Connections: Terminal Solder Pin, Ground: Solder Lug, Weight, nominal: 3 oz. (86g), Operating Temp: -55C to +71C, four (4) different Power Dividers: (Power Divider #1-Freq Range (MHz) 0.05-20, Freq Performance (MHz) 0.05-20, Isolation (dB) Min 30 Typ 33, Insertion Loss, dB, Max 0.5 Typ 0.3, Phase Balance Max 1 degree Typ 0.5 degree, Amplitude Balance (dB), Max 0.2, Typ 0.1, VSWR In/Out, Max 1.3:1 Typ 1.2:1, Input Power Max. 2 W, Impedance: 50 nom., Internal Load Dissipation: 250 mW max., Weight Nominal: 1 oz (28g), Operating Temperature: -55C to +85C.), (Power Divider #2-Freq Range (MHz) 1-100, Freq Performance (MHz) 1-100, Isolation (dB) Min 30 Typ 35, Insertion Loss, dB, Max 0.5 Typ 0.3, Phase Balance Max 1 degree Typ 0.5 degree, Amplitude Balance (dB), Max 0.2, Typ 0.1, VSWR In/Out, Max 1.3:1, Typ 1.2:1, Input Power Max. 3 W, Impedance: 50 nom., Internal Load Dissipation: 250 mW max., Weight Nominal: 1 oz (28g), Operating Temperature: -55C to +85C.), (Power Divider #3-Freq Range (MHz) 1-100, Freq Performance (MHz) 1-100, Isolation (dB) Min 30 Typ 33, Insertion Loss, dB, Max 0.6 Typ 0.3, Phase Balance Max 2 degrees Typ 1 degree, Amplitude Balance (dB), Max 0.2, Typ 0.1, VSWR In/Out Max 1.3:1, Typ 1.25:1, Coupling: -4.8 dB nom., Impedance: 50 nom., Internal Load Dissipation: 250 mW max., CW Power Input: 1 W max., Connectors, SMA Female: to meet interface requirements of MIL-C-39012, Weight Nominal: 2 oz (57g), Operating Temperature: -55C to +85C.), (Power Divider #4-Freq Range (MHz) 1-200, Isolation (dB) Min 25 Typ 30, Insertion Loss, dB, Max 1.5 Typ 1.0, Phase Balance Max 4 degrees Typ 2 degrees, Amplitude Balance (dB), Max 0.4 Typ 0.2, VSWR In/Out, Max 1.3:1 Typ 1.2:1, Coupling: -7.8 dB nom., Impedance: 50 nom., CW Input Power: 2 W Max., Internal Load Dissipation: 250 mW max., Weight Nominal: 2 oz (57g), Operating Temperature: -55C to +85C.), two (2) Different Directional Couplers: (Directional Coupler #1: Frequency Range (MHz) 2-100, Operating Bandwidth (MHz) 2-100, Coupling Tolerance (dB, Max) 10+-1.0, Frequency Sensitivity (dB, Max) +-0.5, Directivity (dB) Min 30, Insertion Loss (dB) Max 0.5, VSWR Main Arm 1.3:1, Cpld Arm 1.3:1), (Directional Coupler #2: Frequency Range (MHz) 0.1-5, Operating Bandwidth (MHz) 0.1-5, Coupling Tolerance (dB, Max) 20+-1.0, Frequency Sensitivity (dB, Max) +-0.5, Directivity (dB) Min 30, Insertion Loss (dB) Max 0.5, VSWR Main Arm 1.3:1, Cpld Arm 1.3:1), one (1) Double Balanced Mixer: RF/LO Frequency (MHz) 1-500, IF Frequency (MHz) DC-500, Operating Range (MHz) 1-100, Conversion Loss (dB) Max 7.5 Typ 6.5, Port Isolation, (Min) L-R dB 45, L-X dB 35, R-X dB 15, Polarity Sense: Positive. At Operating Range (MHz) 100-400: Conversion Loss (dB) Max 7.5 Typ 6.5, Port Isolation, (Min) L-R dB 30, L-X dB 35, R-X dB 15, Polarity Sense: Positive. At Operating Range (MHz) 400-500: Conversion Loss (dB) Max 9.0 Typ 7.5, Port Isolation, (Min) L-R dB 30, L-X dB 20, R-X dB 15, Polarity Sense: Positive, General Specifications: Impedance: 50 nom., Noise Figure: Within +-1dB of Conversion Loss, LO Drive: +7 nom., 1 dB Compression Point: 0 dBm typ., 1 dB Desensitization Level: -2dBm, Input Intercept Point: + 12 dBm typ., Operating Temperature: -55C to +85C.), one (1) Frequency Doubler: Input Frequency (MHz) 5-500, Operating Input Frequency (MHz) 5-100, Conversion Loss (dB) Typ 12 Max 16, Typical Harmonic Output (F1 dB -40), (F3 dB -45), (F4 dB -25), RF Input Range (Nom) +5 to 18 (13 dBm), Package Style: SMA. At Operating Input Frequency (MHz) 100-300, Conversion Loss (dB) Typ 12 Max 15, Typical Harmonic Output (F1 dB -35), (F3 dB -40), (F4 dB -27), RF Input Range (Nom) +5 to 18 (13 dBm), Package Style: SMA. At Operating Input Frequency (MHz) 300-500, Conversion Loss (dB) Typ 15 Max 17, Typical Harmonic Output (F1 dB -30), (F3 dB -40), (F4 dB -30), RF Input Range (Nom) +5 to 18 (13 dBm), Package Style: SMA. General Specifications: Impedance: 50 nom., Weight, FDM-500A: 0.65 oz. (2.5g), Operating Temperature: -55C to +85C., one (1) Variable Attenuator: Mechanical Configuration (Screw Drive/Lock SMA Female), Frequency Range (MHz) DC-400, Performance Bandwidth (MHz) DC-50, Attenuation Range (dB, Min) 0-20, Insertion Loss (dB, Max) 1.0, VSWR (Max) 1.3:1, CW Power W 0.5, Weight 1.4 oz. (40g). At Performance Bandwidth (MHz) DC-200, Attenuation Range (dB, Min) 0-15, Insertion Loss (dB, Max) 1.5, VSWR (Max) 1.5:1, CW Power W 0.5, Weight 1.4 oz. (40g), At Performance Bandwidth (MHz) DC-400, Attenuation Range (dB, Min) 0-10, Insertion Loss (dB, Max) 2.5, VSWR (Max) 2.5:1, CW Power W 0.5, Weight 1.4 oz. (40g). All interested parties who believe they can meet the requirements are invited to submit in writing complete information describing their ability to provide the one (1) Active Isolator, four (4) Different Power Dividers, two (2) Different Directional Couplers, one (1) Double Balanced Mixer, one (1) Frequency Doubler, and the one (1) Variable Attenuator. FOB Destination is the Government preferred method of shipping. Offerors are required to submit with their quote enough information for the Government to evaluate the minimum requirements required in this synopsis. CONTRACTORS MUST COMPLY WITH DFARS 252.204-7004, REQUIRED CENTRAL CONTRACTOR REGISTRATION (MAR 2000). INTERESTED CONTRACTORS CAN ACCESS THIS CLAUSE BY INTERNET URL: http://farsite.hill.af.mil. TO REGISTER WITH THE CCR, GO TO URL: https://www.ccr.dlsc.dla.mil/. The following provisions and clauses apply: Provision 52.252-1 Solicitation Provisions Incorporated by Reference. This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Provision 52.212-1, Instructions to Offerors -- Commercial; clause 52.212-4, Contract Terms and Conditions -- Commercial Items; clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes Or Executive Orders -- Commercial Items (to include: 52.222-26, Equal Opportunity; 52.222-35, Affirmative Action for Special Disabled and Vietnam Era Veterans; 52.222-36, Affirmative Action for Handicapped Workers; 52.222-37, Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era); clause 52.232-33 Mandatory information for electronic funds transfer payment. Offerors must include a completed copy of the provision 52.212-3, Offeror Representations and Certifications -- Commercial Items with the offer. If the offeror does not have a copy of this provision, a copy can be downloaded from this website: http://farsite.hill.af.mil. The following DFARs clauses apply to this acquisition: Clause 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisition of Commercial Items (Mar 1998); 252.225-7001 Buy American Act and Balance of Payment Program; clause 252.225-7036, North American Free Trade Agreement Implement Act. Offers are due at the Air Force Flight Test Center, Directorate of Contracting, 5 South Wolfe Avenue, Edwards AFB, CA, 93524, not later than Close of Business (COB) 24 Sep 2001 at 4 pm. Faxed transmissions of quotes are preferred. Fax #: 661-275-7827 or e-mail address: Philip.cheng@edwards.af.mil.=20

Web Link

Visit this URL for the latest information about this (http://www.eps.gov/spg/USAF/AFMC/AFFTC/Reference-Number-F1EWWX12440 600/listing.html)

Record

Loren Data Corp. 20010912/59SOL003.HTM (D-253 SN50X240)