47 -- COOLANT LINE

Notice Date

July 31, 2001

Contracting Office

NASA/George C. Marshall Space Flight Center, Procurement Office, Marshall Space Flight Center, AL 35812

ZIP Code

35812

Solicitation Number

8-1-1-T7-D5157

Response Due

August 17, 2001

Point of Contact

Brian A. Speer, Contract Specialist, Phone (256) 544-3038, Fax (256) 544-6062, Email brian.speer@msfc.nasa.gov -- George E. Pendley, Contracting Officer, Phone (256) 544-2949, Fax (256) 544-2812, Email george.pendley@msfc.nasa.gov

E-Mail Address

Brian A. Speer (brian.speer@msfc.nasa.gov)

Description

The Government intends to acquire a commercial item using FAR Part 12 and the Simplified Acquisition Procedures set forth in FAR Part 13. This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation, which is issued as a Request for Quotation (RFQ); quotes are being requested and a written solicitation will not be issued. Offerors are required to use the On-Line RFQ system to submit their quote. The On-line RFQ system is linked above or it may be accessed at http://procurement.nasa.gov/cgi-bin/EPS/bizops.cgi?gr=C&pin . The information required by FAR Subpart 12.6 is included in the on-line RFQ. NASA/MSFC plans to acquire a coolant line and supplies. ABBREVIATED item descriptions are used in the On-Line RFQ. The following descriptions are the FULL DESCRIPTION for each item and should be carefully read before submitting an offer: ITEM 1. QUANTITY: 60 FEET. PIPE, 3 INCH NOMINAL, ASTM A451 GRADE TPXM-11 STAINLESS STEEL, MIN EXTRUDED WALL OF 0.445 INCH, -0/+12.5% MFG TOL. SEAMLESS. ITEM 2. QUANTITY: 8 EACH. ELBOW, LONG RADIUS 90 DEGREE, ASTM A 182 FXM-11 WALL TO MATCH EXTRUDED PIPE (ITEM #1), B/W ENDS, PER ANSI B16.9. NOTE: 10 PIPE DIAMETERS OR GREATER PER ANSI B31.2 OR 6 PIPE DIAMETERS OR GREATER PER ANSI B31. 1 MINIMUM WALL MUST BE MAINTAINED AFTER BENDING. ITEM 3. QUANTITY: 4 EACH. HUBS, EGR25. AST, A182 FXM-11 WALL TO MATCH EXTRUDED PIPE, (ITEM 1 ABOVE) B/W ENDS, PER ANSI B16.9. ITEM 4. QUANTITY: 1 EACH. REDUCING HUB, 1-1/2 GR14, ASTM A182 FXM-11 WALL TO MATCH PIPE (ITEM 1) B/W ENDS, PER ANSI B16.9. ITEM 5. QUANTITY: 60 FEET. PIPE, 4 INCH NOMINAL, SCHEDUL 160, 304L STAINLESS STEEL, SEAMLESS. ITEM 6. QUANTITY: 6 EACH. ELBOW, 4 INCH NOMINAL, WALL TO MATCH ITEM 5, ASTM A182 F304L STAINLESS STEEL, B/W ENDS, PER ANSI B16.9. NOTE: 10 PIPE DIAMETERS OR GREATER PER ANSI B31.3 OR 6 PIPE DIAMETERS OR GREATER PER ANSI B31.1 MINIMUM WALL MUST BE MAINTAINED AFTER BENDING. ITEM 7. QUANTITY: 1 EACH. REDUCING HUB, 1GR20, WALL TO MATCH 4 INCH SCHEDUL 160, 304L STAINLESS STEEL, B/W ENDS. ITEM 8. QUANTITY: 4 EACH. HUB, 4GR34, WALL THICKNESS TO MATCH ITEM #5, ASTM A182 F304L STAINLESS STEEL, SEAMLESS, B/W ENDS, PER ANSI B16.9. ITEM 9. QUANTITY: 4 EACH. CLAMP SET, 4 INCH CLAMP SET (CLAMPS, STUDS, AND NUTS) TO MATCH HUBS (ITEM #8 ABOVE), STAINLESS STEEL. ITEM 10. QUANTITY: 8 EACH. SEALS, SIZE 34, 304 OR 316 STAINLESS STEEL, TEFLON COATED. ITEM 11. QUANTITY: 4 EACH. CLAMP SET, 3 INCH CLAMP SET (CLAMPS, STUDS, AND NUTS) TO MATCH HUBS (ITEM #3 ABOVE), STAINLESS STEEL. ITEM 12. QUANTITY: 8 EACH. SEALS, SIZE 25, 304 OR 316 STAINLESS STEEL, TEFLON COATED. Questions regarding this acquisition must be submitted in writing (e-mail is preferred) no later than August 8, 2001. It is the quoter's responsibility to monitor this site for the release of amendments (if any). Potential quoters will be responsible for downloading their own copy of this notice, the on-line RFQ and amendments (if any). An ombudsman has been appointed -- See NASA Specific Note "B". This procurement is a total small business set-aside. Any referenced notes can be viewed at the following URL: http://genesis.gsfc.nasa.gov/nasanote.html .

Web Link

Click here for the latest information about this notice (http://nais.msfc.nasa.gov/cgi-bin/EPS/bizops.cgi?gr=D&pin=62#8-1-1-T7-D5157)

Record

Loren Data Corp. 20010802/47SOL002.HTM (D-212 SN50T4O4)