80 -- SEALING COMPOUND

Notice Date

June 21, 2001

Contracting Office

General Services Administration, Federal Supply Service (FSS), GSA Hardware SuperStore (6FE), 1500 East Bannister Road, Kansas City, MO, 64131

ZIP Code

64131

Description

SEALING COMPOUND / 5 ORDERS TOTALING 116 8030-00-498-5268 UI: KT SEALING COMPOUND: DESCRIPTION In accordance with Military Specification MIL-C-83019, "Coating, Polyurethane, For Protection of Integral Fuel Tank Sealing Compound", dated November 4, 1968 and Amendment 3, dated January 13, 1995. Preproduction Test Report, from either the vendor or his contracted laboratory, shall be submitted to the Contracting Officer. If the vendor has submitted a Preproduction Test Report within the last three years, this requirement is waived. Size: The product shall be furnished as a two part kit consisting of 1 quart of base and the required amount of curing agent in separate containers. The components shall be packaged in containers of the type normally used for this product provided there will be no interaction chemically or physically with the contents so as to damage the containers or alter the strength, quality, or purity of the contents. The containers shall be closed in a manner so that they will not spill or leak during shipment, handling, storage, and redistribution. Packaged components shall be further wrapped, boxed, or containerized together (hot-melt method alone not acceptable) as a complete unit in kit form so that they shall not accidentally separate during shipment, handling, storage, and redistribution. Shelf life code: 4 (12 months) Maximum age on delivery: The product shall have a minimum of 6 months of usable shelf life remaining upon delivery. EXCEPTION(S) TO TECHNICAL DOCUMENT 1. In para. 4.7.2., line 2, delete "Federal Test Method Standard 141 Method 4282" and substitute "ASTM Method D 1200 using a no. 4 Ford cup." 2. In para. 4.6.6.1, line 2, delete "Method 5201 of Federal Test Method Standard No. 791" and substitute "ASTM Method D 1266". 3. In para. 4.7.3, lines 8 and 9, delete "Federal Test Method Standard No. 141, Method 4282." and substitute "ASTM Method D 1200 using a no. 4 Ford cup." ITEM MARKING Each item shall be marked with the following: (1) lot or batch number (2) dates of manufacture or shipment, as appropriate, and reinspection (3) instructions for use, thinning, mixing, shaking, etc. (4) instructions for storage, i.e. do not freeze, requires refrigeration, etc. (5) each kit component shall be marked with the kit name and component part. (6) manufacturer's name and part number (7) if applicable, the maximum volatile organic compound content (VOC), less water and exempt solvents, in lbs/gl or grams/liter on quart sizes or larger. PACKAGING INTERMEDIATE PACKAGING: Not more than 25 units packaged as specified above shall be further packaged in a close fitting corrugated fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification. Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. The units shall be protected within the box by individually packaging in paperboard boxes or with full height partitions or other suitable means to ensure that the containers are not damaged during shipment, handling, storage, and redistribution. PACKAGING: Intermediate packaged boxes may be further packed in a close-fitting, corrugated, fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification (UFC) and Item 222 of the National Motor Freight Classification. Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the UFC. Gross weight of box and contents shall not exceed 65 pounds. MARKING All unit, intermediate, transport packages and unit loads shall be marked for delivery to civilian activities in accordance with the FED-STD-123G, dated June 6, 1997, or marked for delivery to military activities in accordance with MIL-STD-129N, dated 15, May, 1997, as applicable. ALL BIDS MUST BE FAXED TO DANA KARLIN AT 816-823-2136 BY COB 6-28-01.

Web Link

Visit this URL for the latest information about this (http://www.eps.gov/spg/GSA/FSS/6FE/Reference-Number-MPNEWS9431/listing.html)

Record

Loren Data Corp. 20010625/SPMSC017.HTM (D-172 SN50P672)