51 -- REQUEST FOR QUOTATION: REQUESTING STANDING PRICE QUOTE FOR ONE (1) YEAR. AWARD WILL BE BASED ON PRICE AND DELIVERY FOR AN INTRENCHING TOOL, HAND, FOLDING. FOR FURTHER INFO CALL 816-823-1721

Notice Date

June 5, 2001

Contracting Office

General Services Administration, Federal Supply Service (FSS), GSA Hardware SuperStore (6FE), 1500 East Bannister Road, Kansas City, MO, 64131

ZIP Code

64131

Solicitation Number

5120008785932

Response Due

June 14, 2001

Point of Contact

Loretta Martin, Contract Specialist, Phone (816) 823-1721, Fax (816) 823-3109, Email loretta.martin@gsa.gov

Description

INTRENCHING TOOL, HAND, FOLDING, LIGHTWEIGHT: qty (10), BAR CODING IS REQUIRED. DESCRIPTION Intrenching Tool, Hand, Folding, Lightweight. In accordance with U.S. ARMY NATICK LABORATORIES Drawing Number 2-2-284, REVISION Y, Dated 8 JUL 88. Hinged shovel and Handgrip; One Serrated Cutting Blade edge; One Axe Blade edge with Aluminum handle; D-type Hand grip. The tool shall be capable of being used as a shovel when fully extended and as pick when the shovel blade is locked in positioned at a 90 degree angle. The blade and handle shall be capable of being locked when in use or folding D-type hand grip storage. EXCEPTION TO DRAWING: *Use MIL-PRF-24635, Military Specification for Enamel,Silicone Alkyd Copolymer,(Metric) Semigloss in lieu of FED. SPEC TT-C-490. EXCEPTION(S) TO TECHNICAL DOCUMENT Mark each tool in a permanent and legible manner with drawing number and manufacturer's name or identifying symbol. PACKAGING Twenty-four (24) items shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage. PACKING The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., minimum 200 or ECT 32. MARKING All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to civilian activities in accordance with FED-STD-123G, dated June 6, 1997, or marked and bar coded for delivery to military activities in accordance with MIL-STD-129N, dated 15 May 1997, as applicable. PALLETIZATION Pallet Sizes: Unless otherwise specified, the pallets shall be 48" X 40" or 40" X 48" in length and width. Exceptions such as 48" X 48" will be used only with the concurrence of the Office of Distribution Management (FS). Pallet Type Options: Unless otherwise specified, the pallets shall be one of the following two options: 1. PPP-P-1660A, Type I, Type IA, Type II, or Type III. The following designs are acceptable: Style 2 and 7, Class B or C, Grade 2, Sizes 40" x 48", 48" x 40", 4 way (block post) or partial 4 way entry (stinger), non-reversible. 2. ASME MH1.8M-1996, Wood Pallets, An American National Standard. Class 1 and 2, Category 2, Type 3, Style 2, Bottom Deck 1, Sizes 40" x 48" and 48" x 40" Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight. Exceptions to this requirement shall have the concurrence of the Office of Distribution Management. Pallet Load Configuration: The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Then vertical, horizontal, or filler reinforcement shall be added as necessary to provide the strength necessary to support three additional palletized loads. Stacking Strength: The pallet plus the load shall be capable of supporting three additional like loads without any product damage and without the load or the pallet collapsing. Palletized Load Stacking Test: The palletized load as presented for shipment shall be tested for stackability. The test load shall be placed on a rigid surface with three additional loads stacked on top for 24 hours. The tester has the option of simulating the three additional loads with a like pallet and weight equaling three like loads. Example: If the pallet load weighs 1000 pounds then 3000 pounds on a like pallet, shall be stacked on the test load for 24 hours. Test personnel shall be responsible to test in compliance with National and local safety regulations. Testing need not be repeated as long as the palletized load design and materials do not change. Partial Palletized Loads: Less than one-half pallet loads do not require testing. Shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only. The following clauses apply to this procurement and are available upon your request: SOURCE SELECTION: 52.246-2, 552.211-75, 552.211-76 AND 552.246-70. BAR CODING MARKING IS REQUIRED. SHIPMENTS MUST BE MARKED PROPERLY IF BAR CODE MARKING IS RQUIRED. IF SHIPMENTS ARE NOT PROPERLY MARKED THEY MAY BE REJECTED OR REMARKED

Web Link

Visit this URL for the latest information about this (http://www.eps.gov/spg/GSA/FSS/6FE/5120008785932/listing.html)

Record

Loren Data Corp. 20010607/51SOL001.HTM (D-156 SN50O0D0)