83 -- FELT, SHEET

Notice Date

March 27, 2001

Contracting Office

Defense Supply Center Philadelphia, Attn: DSCP-CO, Building 6, 700 Robbins Avenue, Philadelphia, PA 19111-5092

ZIP Code

19111-5092

Solicitation Number

SP0100-01-Q-4171

Point of Contact

Monica Roberts, 215-737-8705

E-Mail Address

Monica Roberts (moroberts@dscp.dla.mil)

Description

Note 26 applies. Request for quotation SP0100-01-Q-4155 will only be available through the Procurement Gateway. Copies of this solicitation will be made available on the DLA Procurement Gateway at http://progate.daps.mil/home or http://12.3.216.20/home at time of solicitation issuance. From the Gateway homepage, select "search RFQs" from the right hand sidebar. Then close the RFQ you wish to download and view these documents you will need Adobe Acrobat Reader. This software is available free at http://www.adobe.com. In addition, to receive E-MAIL NOTIFICATION OF RFQs you must register with the USER PROFILE feature on the Gateway. Specification/patterns and/or applicable documents can be obtained by contacting the buyer Monica Roberts at 215-737-8705 or moroberts@dscp.dla.mil. An estimated, repeat estimated response date of April 12, 2001 is established. The following Felt, Sheet will be procured: 2,736 SF of Nonwoven, 80% Wool, Type I, Class 12R3, 1/2 inch thick, Gray, 72 inch width, mildew resistant, Type I, 5,237 SF of Nonwoven, Type I, Classification 12R3, 80% Wool Grey, 3/16 inch thick, 2.29 lbs/sq yd, 72 inch width, mildew resistant, type I, 5,670 SF of Nonwoven, Classification 12R3, 80% Wool, Gray, 72 inch width, 1/8 inch thick, 1.53 lbs/sq yd, mildew resistant, type I, 109 SF of Nonwoven, 80% Wool, Class 12R3, mildew resistant, Type I, Gray, 3/8 inch thich, 72 inches wide and 2,859 SF of Tyep I, Nonwoven, 80% Wool, Gray, Classification 12R3, 3/4 inch thich, 9.18 lbs/sq yd, 72 inch width, mildew resistant, Tye I. Prices are to be FOB Destination to depot location in Albany, GA. Production leadtime is 120 days after date of award for 6 deliveries. ASTM-D-2475 and ASTM-D-461 specs are applicable. The mildew resistance shall conform to MIL-F-2312. Inspection and Acceptance shall be at Destination. Shade evaluation of the felt is applicable. This RFQ will be 100% set-aside for small business concerns.

Record

Loren Data Corp. 20010329/83SOL001.HTM (W-086 SN50H4E1)