61 -- MOTION CONTROL EQUIPMENT

Notice Date

January 29, 2001

Contracting Office

NASA/Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 44135

ZIP Code

44135

Solicitation Number

3-167446

Response Due

February 12, 2001

Point of Contact

Jean M. Boylan, Purchasing Agent, Phone (216) 433-2140, Fax (216) 433-2480, Email Jean.M.Boylan@grc.nasa.gov

E-Mail Address

Jean M. Boylan (Jean.M.Boylan@grc.nasa.gov)

Description

This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This procurement is being conducted under the Simplified Acquisition Procedures (SAP). 1.) TABLE (QUANTITY 1 EACH) 5000 SERIES SLIDE, 2411 TRAVEL, END OF TRAVEL LIMITS, ENGLISH DIMENSIONS, 4MM/REV PRECISION GROUND BALL SCREW, POSITION ACCURACY +0 ?24 MICROMETERS, FLATNESS WITHIN 6 MICROMETERS OVER TRAVEL, FOLD-BACK MOTOR KIT, 10'?6 VACUUM COMPATIBLE Manufacturer: AEROTECH Model No: ATS50060?VAC6?U?40P-NC-NM-FB/ (OR EQUAL) 2.) TABLE (QUANTITY 1 EACH) 5000 SERIES SLIDE, 12"TRAVEL, END OF TRAVEL LIMITS, ENGLISH DIMENSIONS, 4MM/REV PRECISION GROUND BALL SCREW, POSITION ACCURACY +0 ?24 MICROMETERS, FLATNESS WITHIN 6 MICROMETERS OVER TRAVEL, FOLD-BACK MOTOR KIT, 1OA?6 VACUUM COMPATIBLE Manufacturer: AEROTECH Model No: ATS50030?VAC6?U?40P-NC-NM-FB/ (OR EQUAL) 3.) CONTROLLER (QUANTITY 1 EACH) UNIDEX 500 4 AXIS MOTION CONTROLLER. COMPUTER INTERFACE CARD TO CONTROL MOTION SYSTEM. MUST BE COMPATIBLE WITH LAB VIEW SOFTWARE WITH DRIVERS AVAILABLE. Manufacturer: AFROTECH Model No: U50OPCI?PLUS/ (OR EQUAL) 4.) CABLE (QUANTITY 1 EACH) 12' CONTROLLER TO DRIVE CHASSIS CABLE Manufacturer: AEROTECH Model No: OP500?12/ (OR EQUAL) 5.) AMPLIFIERS (QUANTITY 1 EACH) RACK MOUNTED DRIVER CHASSIS WITH AMPLIFIERS TO POWER MOTION CONTROL SYSTEM. MUST BE COMPATIBLE WITH CONTROLLER CARD, MOTORS, AND TABLE ENCODERS. Manufacturer: AEROTECH Model No: DR50OR?A?80?80/ (OR EQUAL) 6.) MOTORS (QUANTITY 2 EACH) BRUSH LESS SERVO MOTOR WITH 4000 WITH 35 FOOT INTEGRAL VACUUM CABLE. PREPARED FOR 10A 6 TORR VACUUM. INTEGRATED ON ATS5000 SLIDES Manufacturer: AEROTECH Model No: BM250?MS?EIOOOOH/VAC6/ESXXXXXX (OR EQUAL) 7.) CORRECTION (QUANTITY 2 EACH) HIGH ACCURACY LINEAR ERROR CORRECTION 2 MICROMETER ACCURACY AND +/? 0.5 MICROMETER REPEATABILITY FOR ATS50060. +/? 1 MICROMETER ACCURACY AND +/?0.5 MICROMETER REPEATABILITY FOR ATS50030. Manufacturer: AEROTECH Model No: HALAR/ (OR EQUAL) 8.) CORRECTION (QUANTITY 2 EACH) HIGH ACCURACY STRAIGHTNESS CORRECTION. +/? 3 MICROMETER ACCURACY FOR ATS50060 THE 2411 TABLE. +/? 1.5 MICROMETER ACCURACY FOR ATS50030 THE 1211 TABLE. Manufacturer: AEROTECH Model No: HALSF/ (OR EQUAL) 9.) ASSEMBLY (QUANTITY 1 EACH) ASSEMBLY OF SLIDES IN X?Z CONFIGURATION TO 5 ARC SECONDS Manufacturer: AEROTECH Model No: PA5Z/ (OR EQUAL) 10.) BRACKET (QUANTITY 1 EACH) RIGHT ANGLE BRACKET FOR 1211 SLIDE WITH VACUUM PREPARATION. Manufacturer: AEROTECH Model No: HDZ5/VAC6 (OR EQUAL) MECHANICAL AND COMPUTER SPECIFICATIONS FOR THE POSITIONING SYSTEM. THE SYSTEM WILL BE USED IN A HIGH VACUUM ENVIRONMENT. THE DEGREE OF ACCURACY AND PRECISION IN THE POSITIONING IS ESSENTIAL. THE POSITIONING SYSTEM WILL BE MOVING AN INSTRUMENT THAT WILL BE USED TO MEASURE MICROSCOPIC SURFACE MODIFICATION TO ION THRUSTER COMPONENTS. GENERAL : X-AXIS= COMPUTER CONTROL. FOLD-BACK MOTOR.: Z-AXIS = COMPUTER CONTROL. FOLD BACK MOTOR TRAVEL: X-AXIS = 24 INCHES: Z-AXIS = 12 INCHES LINEAR POSITION PRECISION: X AXIS = +/- 0.5 UM: Z AXIS = +/- 0.5 UM LINEAR POSITION ACCURACY: X-AXIS = +/-2 UM: Z AXIS = +/- 1 UM FLATNESS& STRAIGHTNESS: X AXIS = +/-3 UM: Z AXIS = +/-1.5 UM ORTHOGONALITY IN X-Y CONFIGURATION: +/- ARCSECONDS PLANE OF OPERATION" X AXIS = HORIZONTAL: Z AXIS = VERTICAL ENVIRONMENT: X AXIS = 1 X 10(-6)TORR: Z AXIS = 1X10(-6) TORR PROTECTION: X AXIS = WAYCOVER FOR LEAD SCREW: Z AXIS = WAYCOVER FOR LEAD SCREW COMPUTER CONTROL: ACCESS THROUGH PCI OR ISA SLOT. LABVIEW DRIVERS AVAILABLE. The provisions and clauses in the RFQ are those in effect through FAC 97-21. This procurement is a total small business set-aside. See Note 1. The NAICS Code and the small business size standard for this procurement are 335314 and 750, respectively. The quoter shall state in their quotation their size status for this procurement. All qualified responsible business sources may submit a quotation which shall be considered by the agency. The DPAS rating for this procurement is DO-C9 Quotations for the items(s) described above are due by 02/12/01 and may be faxed to Jean M. Boylan @ 216-433-2140 and include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. If the end product(s) quoted is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the quoter shall so state and shall list the country of origin. The Representations and Certifications required by FAR 52.2l2-3 may be obtained via the internet at URL: http://ec.msfc.nasa.gov/msfc/pub/reps_certs/sats/ The FAR may be obtained via the Internet at URL: http://www.arnet.gov/far/ The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/office/procurement/regs/nfstoc.htm Award will be based upon overall best value to the Government, with consideration given to the factors of proposed technical merits, price and past performance; other critical requirements if so stated in the RFQ will also be considered. Unless otherwise stated in the solicitation, for selection purposes, technical, price and past performance are essentially equal in importance. It is critical that offerors provide adequate detail to allow evaluation of their offer (see FAR 52.212-1(b). Quoters must provide copies of the provision at 52.212-3, Offeror Representation and Certifications -- Commercial Items with their quote. See above for where to obtain copies of the form via the Internet. An ombudsman has been appointed -- See NASA Specific Note "B". It is the quoter's responsibility to monitor the following Internet site for the release of amendments (if any): http://nais.msfc.nasa.gov/cgi-bin/EPS/bizops.cgi?gr=C&pin=22 Potential quoters will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any). Any referenced notes can be viewed at the following URL: http://genesis.gsfc.nasa.gov/nasanote.html

Web Link

Click here for the latest information about this notice (http://nais.msfc.nasa.gov/cgi-bin/EPS/bizops.cgi?gr=D&pin=22#3-167446)

Record

Loren Data Corp. 20010131/61SOL001.HTM (D-029 SN50C1D2)