Loren Data Corp.

'

  
COMMERCE BUSINESS DAILY ISSUE OF OCTOBER 18, 2000 PSA #2708
SOLICITATIONS

66 -- ELECTRODYNAMIC VIBRATION MACHINE AND CONTROL SYSTEM

Notice Date
October 16, 2000
Contracting Office
Bid Office, SPAWARSYSCEN, Code D21B, 53570 Silvergate Avenue, Bldg. A33, Room 0061, San Diego, CA 92152-5112
ZIP Code
92152-5112
Solicitation Number
N66001-01-Q-3252
Response Due
October 30, 2000
Point of Contact
Purchasing Agent, Ms. Gina Bennett, D212, (619) 553-5208. Contracting Officer, Ms. Sylvia Proffit, D211, (619) 553-3292.
Description
This is a combined synopsis/solicitation prepared in accordance with FAR Part 13. No RFQ will be prepared or made available for distribution; award will be made based on responsive, responsible, and technically acceptable low bids. The government intends to procure on a competitive basis an Electrodynamic Vibration Machine and Control System, quantity 1 each. Vibration System Technical Requirements: Acceleration Ratings: Sine: 60 g pk minimum (no load). Sine: 35 g pk minimum with 100 lb load. Sine: 15 g pk minimum with 400 lb load. Shock: 100 g pk 4 msec sine (15 lb load). Shock: 30 g pk 11 msec sine (450 lb load). Sine Force Output (minimum): 9,000 lbs pk. Random Force Output (minimum): 9,000 lbs rms. Shock Force Output (minimum): 18,000 lbs pk. Minimum Velocity Rating: 50 in/sec pk sine minimum. Minimum Displacement Rating: 2.0" pk-pk sine. Shaker Armature Diameter: 24" minimum. Vertical Head Expander Size: 36" x 36" Square. Head Expander Mass: 300 lbs maximum. First Resonant Frequency: 800 Hz minimum. Cooling Method: 100% Air Cooled. Electrical Utilities: 480V 3 phase 60 Hz 60 KVA max. Horizontal Slip Table: Size: 36" x 36" working area slip plate. Bearing Type: Lateral Restraint Bearing. Trunnion Isolation: Dynamic Isolation & Guidance at trunnions to minimize base resonance. Controller: Input Channels: Four (4) minimum. Input Sampling: 50 KHz minimum. Anti-aliasing Filters on all analog inputs: Selectable Butterworth or Linear Phase, cut-off appropriate for selected sampling rate. Input A/D's: Parallel 16 bit minimum. Input Charge Amps: 4 channels minimum. Sensitivity Adjust: 0 -- 100 pC/g or mV/g. Output Signal Select: 10 or 100 mV/g. Output Channels: 2 minimum (drive and COLA). Drive Out: 16 bit D/A minimum (0-10V pk). COLA Out: 16 bit D/A minimum (1V rms at sine freq). Software Modules: Sine Vibration: 2 -- 5,000 Hz Sweep or Dwell. Random Vibration: 2 -- 5,000 Hz. Classical Shock Pulse Control. Diagnostic Tool: 2 -- 5,000 Hz manual since Auto Calibration Kit. System Acceptance Test: System must be functionally tested in its entirety at the suppliers U.S. facility to demonstrate the above technical performance specifications prior to shipment. Competitive awards may be based on evaluation criteria stipulated in the Red, Yellow, Green (RYG) Contractor Evaluation System. While price will be a significant factor in the evaluation of offers, the final contract award will be based on a combination of price and delivery, a determination of responsibility and technically acceptable low bids. No hard copies will be available. No telephone requests will be accepted. Questions may be directed to Gina Bennett via email: gina@spawar.navy.mil. Facsimile quotations may be sent to (619) 553-1062. See numbered notes from any Monday edition of the CBD. The applicable Standard Industrial Classification Code (SIC) is 5084. Note: The full text of the Federal Acquisition Regulation (FAR) can be accessed on the Internet at http://farsite.hill.af.mil/. Offerors must complete and submit with their quote, a copy of FAR 52.219-1 Alt I/II, Small Business Program Representation. Central Contractor Registration is required for resulting award. Information may be found at http://www.ccr2000.com/.
Record
Loren Data Corp. 20001018/66SOL001.HTM (W-290 SN5043F9)

66 - Instruments and Laboratory Equipment Index  |  Issue Index |
Created on October 16, 2000 by Loren Data Corp. -- info@ld.com