V -- SEALIFT OF APPROX. 19,000 SQ FT CARGO LIVORNO/BIZERTE/UMM SAID

Notice Date

September 28, 2000

Contracting Office

Commander, Military Sealift Command, Bldg 210, 914 Charles Morris Court SE, Code N10, Washington, DC 20398-5540

ZIP Code

20398-5540

Solicitation Number

N00033-00-R-5718

Response Due

October 2, 2000

Point of Contact

Mark Chadwick (202) 685-5829, Dale Rieck (202) 685-6307

E-Mail Address

Contract Specialists (mark.chadwick@msc.navy.mil, dale.rieck@msc.navy.mil)

Description

1. Vessel(s) Required: U.S. or Foreign Flag self-sustaining RoRo vessel(s) capable of maintaining 14 knots laden in moderate weather to transport 19,355 sq. ft. (+/- 10% CHOP). The cargo consists of approximately 2,000 sq. ft. of general military cargo and 17,355 sq. ft. of rolling stock from Livorno, Italy, to Bizerte, Tunisia and Umm Said, Qatar. Approximately 12,895 sq. ft. (102 pieces) will be off loaded in Bizerte and 6,460 sq. ft. (28 pieces) will be off loaded in Umm Said. Contractor to provide all lashing gear and cargo tie-down points sufficient for securing cargo. Owner to warrant that any and all regulatory compliances are maintained. Cargo Description: Total cargo: Approximately 19,355 sq. ft. +/- 10% (CHOP) of rolling stock and general military cargo. The following dimensions apply: Longest Piece (inches): 510L Widest Piece (inches): 140W Tallest Piece (inches): 222H Max. Weight of Cargo: 19.4 Short Tons Contact Mark Chadwick at (202) 685-5829 or e-mail mark.chadwick@msc.navy.mil, or Dale Rieck at (202) 685-6307, e-mail dale.rieck@msc.navy.mil for a complete packing list. 2. Terms: Free-In Livorno, Italy/Liner-Out Bizerte, Tunisia and Umm Said, Qatar 3. Loading Port(s)/Place(s): Livorno, Italy 4. Laytime: 1 Day SSHINC Total 5. Discharging Port(s)/Place(s): Bizerte, Tunisia and Umm Said, Qatar 6. Laydays: 11 Oct 00 (Commencing); 12 Oct 00 (Cancelling) 7. Terms/Conditions/Attachments added, deleted or modified: ADD V(c) "Loading and Discharging (Liner Terms)", Bizerte, Tunisia and Umm Said, Qatar; ADD -- V(d) "Loading and Discharging (F.i.o.s.s. with Owner-Furnished Lashing Gear" Livorno, Italy; ADD -- V(g) "Position Reports", email: Jeff King jefferey.king@msc.navy.mil; VI Change date of clause to "AUG 2000"; VII Change date of clause to "MAR 2000"; X Change date of clause to "MAR 2000"; X(j) Internet home page on third to last line is changed to http://www.customerserviced@dnb.com ; XII Change date of clause to "FEB 2000"; III. Instructions to Offerors Offerors shall use the guidelines set forth in Part X for submission of offers; however, at a minimum, offers must contain the following: 1. Lumpsum price, demurrage rate (both to be evaluated). 2. Speed of Advance (SOA) and detailed itinerary. 3. Set of completed boxes (Ref (B), pages I-1 through I-4) 5. Completed Representations and Certifications (Part XII, Ref (B)). 6. IAW DFARS 252.204-7004, U.S. offerors (and foreign offerors working in the U.S.) must be registered in the Central Contractor Registry (CCR) in order to be considered for award. To comply: * Provide a DUNS number with your solicitation. This number is required to verify registration and in order to register in the CCR. The DUNS number can be obtained by calling 1-800-333-0505. * Register in the CCR by calling 1-888-227-2423 or through the MSC's website at http://www.msc.navy.mil/ go to Contracts then Library of Common Documents "Central Contractor Registration (CCR)". * Register for electronic funds payment, also at the above-identified MSC website, under "Electronic Funds Transfer (EFT) Registration Form". IV. For evaluation purposes one-half ( ) day of demurrage will be added to the total evaluated cost.

Web Link

Click on Contracts then Library of Common Documents (http://www.msc.navy.mil)

Record

Loren Data Corp. 20001002/VSOL001.HTM (W-272 SN501663)