Loren Data Corp.

'

 
 

COMMERCE BUSINESS DAILY ISSUE OF MAY 18,2000 PSA#2603

USAED, Walla Walla, ATTN: CENPW-CT, 201 North Third Avenue, Walla Walla, WA 99362-1876

95 -- FABRICATE AND INSTALL NEW PERFORATED PLATES ON EXTENDED LENGTH SUBMERGED BAR SCREENS, LOWER GRANITE AND LITTLE GOOSE DAMS, SNAKE RIVER, WASHINGTON SOL DACW68-00-B-0036 DUE 070600 POC To order solicitation package, interested firms may: 1) fax requests, complete with company information, shipping address, point of contact, DUNS and CAGE code nos., phone and fax numbers, as well as business size, to Kari Montgomery, fax 509-527-7802; 2) e-mail request with previously mentioned information to the address below; or 3) register via the Walla Walla District's Web Page at the URL listed below. POC for administration, Kari Montgomery, telephone 509-527-7211. Technical POC, John Boschker, telephone 509-527-7541. WEB: Click here to register for solicitation package., http://www.nww.usace.army.mil/ebs/asp/advertisedsolicitations.asp. E-MAIL: Solicitation No. DACW68-00-B-0036, Karoleen.A.Montgomery@usace.army.mil. The U.S. Army Corps of Engineers, Walla Walla District, has a competitive requirement for all labor, material, equipment and plant to fabricate and install new perforated plates on the extended length submerged bar screens (ESBS) at Lower Granite and Little Goose Dams, Snake River, Washington. All installation work at the project sites will be performed in the dry, with no underwater diving work required. Perforated plates vary in size from approximately 4 feet by 5 feet to 1 foot by 5 feet in outside dimension. Plates are -inch thick stainless steel with 1-inch diameter holes placed in a specific pattern. Holes have tapered sides. Hole diameter is 1-inch on one face of the plate and approximately 1-1/4-inch on the opposite face of the plate. Steel angles and backing bars are welded to the plates to add stiffness and allow bolting of the plates to the ESBS structure. There are 29 perforated plates on each ESBS and 35 ESBSs at both dams. A total of 1015 perforated plates are required. All perforated plates, angles, and backing bars will be stainless steel. The existing perforated plates on the ESBSs must be removed before new plates are installed. Approximately 11,700 stainless steel cap screws, 7/8 9 UNC 2A x 2-1/2-inch long, are required to attach perforated plates to ESBSs. Miscellaneous stainless steel and carbon steel fabricated items and stainless steel cap screws will also be required. Contract completion will be approximately 200 calendar days after award. Transportation costs f.o.b. destination. PROCUREMENT UNRESTRICTED. Size standard for identification of small business concerns under Standard Industrial Classification Code 3443, is that the average employment, based on the number of persons employed on a full-time-, part-time, temporary, or other basis during each of the pay periods of the preceding 12 months, shall not exceed 500 employees. If a large business is selected for this procurement, it must comply with FAR 52.219-9 regarding the requirement for a subcontracting plan on the portion of the work it intends to subcontract. The subcontracting GOALS are: a minimum of 61.2 percent of the Contractor's intended subcontract amount be placed with small businesses (SB), including 9.1 percent with small disadvantaged businesses (SDB). A minimum of 5 percent of the intended subcontract amount shall be placed with woman-owned small businesses (WOSB). It has NOT been determined whether bonding will be required. This is not a request for bids, but notice that our intention is to issue a solicitation for this requirement. All responsible sources may submit an offer, which will be considered by this agency. (NOTE: Issue and response dates are tentative and will be established when solicitation is issued.) Posted 05/16/00 (W-SN455603). (0137)

Loren Data Corp. http://www.ld.com (SYN# 0332 20000518\95-0001.SOL)


95 - Metal Bars, Sheets and Shapes Index Page