Purchase Services Branch, Attn: Code 535.3, Portsmouth Naval Shipyard, Portsmouth Naval Shipyard, Portsmouth, NH 03801-2590

35 -- RUBBER TENSILE MACHINE SOL N00102-00-Q-1600 DUE 040700 POC Robert Seaward 207-438-3877/207-438-1251 E-MAIL: seawardrt@mail.port.navy.mil, seawardrt@mail.port.navy.mil. Rubber Tensile Machine 4465 Model 4465 Column Table Mounted Testing System, Capacity 5kN (500 kg, 1000 lb.)  Standard Features to Include:  Digital crosshead drive system w/fully variable speed control.  Integrated digital closed-loop control and data acquisition electronics.  Crosshead extension and load measurement channels (an optional strain channel can be added).  Test control panel with: three illuminated four-digit displays for simultaneous readout of load, extension, and strain (peak, break, peak break or instantaneous values).  Primary four-digit display for testing speed, cycle count, transducer full scale and other set-up values.  User-definable electronic limits for extension, load, or strain, w/programmable crosshead actions (stop, return or cycle between limits).  Automatic recognition and calibration of transducers.  Cycle counter with end count stop control.  Pre-tension automatic grip controller,  Pre-set point calculations.  System of units: SI, Metric, US Customary (user-selectable).  Testing speed range: 0.001 in/min to 1000 mm/min (0.00004 in/min to 40 in/min).  Crosshead return speed: 1200 mm/min (47.2 in/min) with built-in deceleration feature for precise crosshead positioning.  Precision pre-loaded ballscrew drive and crosshead guidance.  Stand +/-10 V analog output signal for load. W/optional strain card, +/-10 V output signal for strain.  Base adapter: Type D female fitting (1.25 in. connection with 0.5 in. clevis pin).  CE mark conformity. 4465-A1 Model 4465, English language option. 4465-D1 Model 4465, voltage option 120V. 4465-E1 Model 4465, Maximum crosshead travel: 1135mm (44.7 in). 4465-F1 Model 4465, Horizontal test space: 420mm (16.5 in). 4465-G1 Model 4465, Single test space (below moving crosshead only). 2525-805  Tension/Compression Load Cell, Static Load Capacity: 5 kN (500 kg, 1000 lb)  Type O female fitting (12 mm connection with 6 mm diameter clevis pin).  Drop through, bolt on design with self identification and electrical calibration.  Linearity: +/-0.25 of reading over a range of 0.4% to 100% of capacity.  Repeatability: +/-0.25% of reading over a range of 0.4% to 100% of capacity.  Hysteresis: 0.2% of maximum reading in cycle.  Creep: 0.2% of reading over 3 minutes.  Output Sensitivity: 2.0 millivolts per volt +/-20% at full rated capacity.  Bridge Resistance: 350 ohms +/-5%.  Overload Protection: 150% of capacity w/o permanent zero shift. 300% of capacity or 5 kN (500 kg, 1000 lb) whichever is greater w/o mechanical failure.  Zero Stability: 0.001% of full rated output per hour (isothermal conditions).  Temperature Compensation: 0-50 C (32-122 F)  Temperature Effect on Zero and Span: 0.002% of capacity per degree Celsius. 1480-001 Verification of Load Weighting System at installation Specifications, which exceed ASTM Specifications for one Load Cell up to 56 kip. Verification at installation is required by ASTM E4 Standard. Service to include:  Installation and hook-up of all hardware.  Set-up of one software test method to the customer's requirement (where applicable).  Set-up of the hardware to the customer's requirement.  Start-up Training. Training to include use of all safety features, calibration requirements and basic operational functions as well as the successful completion and acceptance of a customer test, including specimens, where possible. 2210-865 Model 4400 AC/DC Sensor Conditioner Card. Provides strain conditioning and data acquisition capability for extensometers. LVDT's strain gauges and other 0-10 VDC output devices. 2603-080 Balanced Elastomeric Extensometer, Long Travel, SI/US/Metric Calibration Units. Elongation: 250 mm/10in. Resolution: 100um/0.004 in. Gauge length at 10, 20, 25, 50, 100, 200 mm Maximum strain 2000% (at 0.5 in. gauge length). Rationalized and Electrical Calibration. 2603-080A2 4200, 4400, 4501, 4502, and 5500 Series 1490-002 Strain Verification, Dynamic or XL Extensometer Verification of an Extensometer as a system is required by ASTM E83, Section 5 to determine if class of a system, i.e., B1, B2, C, etc. 2410-251 PC/SOFTWARE OPTION Series IX, Version 8 Software for Windows NT 98. Series IX is the most complete materials testing software available for automatic data acquisition and analysis. It supports the widest range of tension, compression, flexural, peel, tear, and friction applications including ASTM, ISO, and other industry standard test methods. Test methods and calculations can be customized by the user. Once a test is run, Series IX calculates test results and generates a report. 2410-251A1 English Language Option 2410-251B2 CD ROM 2410-251C7 Series IX Version 8 Software and machine interface and cable. 2410-251D1 Enhances Report Option for Series IX Version 8 2490-660  Dell Pentium Computer System:  Intel Pentium II processor (or latest) 450 MHz w/512K Cache  128 MB 100 MHZ SDRAM expandable to 384MB  4.3 GB EIDE hard drive  3.5" 1.44MB Diskette Drive  14X min/32X max CD-Rom  Mini Tower  104+ Keyboard  MS IntelliMouse 2490-660A1 US Keyboard and Windows Option 2490-660B2 Windows NT operating system option 2490-660C1 17" Monitor 2490-660D1 100/120 VAC option 2490-660E1 PCI-GPIB board w/cable option 2424-109 HP Color Deskjet Printer 2424-109C1 English Option 2424-109D2 Voltage 120VAC AC GRIPS/FIXTURES OPTIONS 2713  Self Tightening Grips. Capacity: 1.0 kN (200 lb, 100 kg).  Temperature Range: -73 C to 150 C (-100 F-302 F).  Upper Fitting: Type Cm (5/8" connection with " clevis pin).  Lower Fitting: Type Dm (1.25" connection with " clevis pin).  Includes rubber covered snubbing rollers and smooth snubbing rollers.  For elastomeric samples. 2501-133 Rigid Coupling, Type Om (12 mm connection with 6 mm clevis pin) to Cf (5/8" connection with " clevis pin). Capacity 10 kN. This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice.Quotations are being requested and a written solicitation will Not be issued. This announcement is issued as N00102-00-Q-1600 and incorporates provisions and clauses effective through Federal Acquisistion circular 97-15. The standard industrial classification (3829). This acqusition is Not reserved for Small Business. However, the quoter's size status may affect entitlement to award in the case of a tie. Place of delivery is Portsmouth Naval Shipyard, Portsmouth NH. Conditions -- Commercial items; Contract terms and conditions required to implement statues or executive orders -- Commerical items.52.215-5 Facsimile proposals (207)438-1251. In addition, anyone responding to this notice must provide a complete copy of the FAR provision 52.212-3, Offeror Representations and Certifications -- Commercial Items, with their response (Note: FAR text is available throught the world wide web at http://www.arnet.gov/far/. Note to all qualified requesters: Please mail quotes to Portsmouth Naval Shipyard, Bldg 153-6th floor-Attn Robert Seaward, Portsmouth NH 03801-2500. Please include Cage Code, Dun's and TIN Numbers on qoute. The closing date for receipt of quotations is April 07, 2000 at 3:00PM local time. POC: Robert Seaward 207-438-3877/Fax 207-438-1251 Posted 03/20/00 (W-SN435958). (0080)

Loren Data Corp. http://www.ld.com (SYN# 0219 20000322\35-0002.SOL)