Commander, Naval Air Warfare Center, Weapons Division, Code 220000D, 1 Administration Circle, China Lake, CA 93555-6100

59 -- PRINTED WIRING BOARDS SOL N68936-99-R-0003 DUE 121799 POC Erin Strand, Contract Specialist, (760) 939-7309, Contracting Officer, Mary Jacobs,(760)939-6043 <DESC> The Naval Air Warfare Center Weapons Division, China Lake, CA, intends to procure prototype printed wiring boards for various development and test programs. The contract will encompass multiple verbal or Internet product orders over a 2-year period of performance. Payment will be made via Government Purchase Card on a monthly basis not to exceed $50,000. Requirements. Using Government-provided Gerber and drill files, the contractor shall manufacture printed wiring boards for the NAWCWPNS. Gerber and drill files will be submitted via electronic mail or modem (direct dial-up phone line), and the contractor shall be capable of accepting those files. The contractor shall accept orders either verbally or via electronic mail, and quotations shall be delivered to NAWCWPNS via electronic mail or telefax. Prior experience with Government procurements is desired. Quantity. The contractor shall maintain a prototype PWB capability to meet NAWCWPNS prototyping needs. The minimum order quantity order will be one PWB; there shall be no maximum order quantity limit. Manufacturing. The contractor shall maintain a capability to produce multi-layer as well as single- and double-sided PWBs. The range of PWB physical size manufacturing capability shall be maximized; procurements of very small- and very large-sized PWBs may be anticipated. Contractor processes shall be capable of employing mixed component technologies (both surface mount and through-hole). The contractor shall have the capability to control and verify impedance on all PWBs. Solder masking and silk screen capability shall be available. In addition, the contractor shall have the capability to provide net list and bed of nails testing. Screened-on solder paste capability is desired. Delivery. The contractor shall provide a PWB turnaround time of as little as 12 hours with next day delivery of the PWB. Quality Program. The contractor shall have quality control processes in-place to maintain product quality. Although not required for every board, the contractor shall maintain a MIL-PRF-55110 quality program. Pricing. Pricing shall be via published catalog; a software catalog is acceptable if the catalog is releasable to NAWCWPNS. The pricing catalog should be based upon the number of layers, the number of boards to be produced, and the number of holes per board; a correction factor addressing delivery schedule should also be included. Other pricing factors included in the pricing schema should be noted separately. The anticipated award date is 3 February 2000. The solicitation will be issued on or about 3 December 1999 and will be available through the 2.0 Contract Competency Homepage at: http://www.nawcwpns.navy.mil/~contract/hompubl.htm. All responsible sources will be considered by the agency. If you prefer to receive a hard copy or wish to be placed on the mailing list, please contact the Contract Specialist, Erin Strand, in writing (or by fax: 760-939-8186 or by e-mail: strandek@navair.navy.mil). Posted 11/05/99 (W-SN398582). (0309)

Loren Data Corp. http://www.ld.com (SYN# 0205 19991109\59-0006.SOL)