Defense Distribution Center, Office Of Procurement, ATTN: DDC-PP, Building 2001, 2nd Floor, New Cumberland, PA 17070-5001

J -- MAINTENANCE ON MONARCH MARKING MACHINES SOL SP3100-00-T-0025 DUE 111899 POC Robbie Witmer, Contract Specialist, 717-770-7126 E-MAIL: rwitmer@ddc.dla,mil, rwitmer@ddc.dla.mil. The Defense Distribution Center, located at Warner Robins AFB, Georgia has a requirement for a contractor to perform all maintenance, repair and keep the monarch marking printers in a serviceable condition according to the current manufacturer's specifications. Any/all equipment repair costs incurred by the contractor for subcontract repair will be at no additional cost to the Government. The contractor must furnish all necessary labor and parts/materials to accomplish the foregoing requirements: PREVENTATIVE MAINTENANCE: (1) Preventative maintenance will be performed as needed during service calls. (a) This includes all adjustments the contractor deems necessary to completely maintain the equipment as stated in the latest manufacturing specifications and handbooks, which will be obtained, and updated/maintained by the contractor. These adjustments shall include but not be limited to changing/swapout of parts, resettings cleanings, etc. All maintenance shall be performed on-site. The manufacturer shallreplace all parts needing replacement without charge with the exception of those parts needing replacement as the result of any cause other than ordinary use as intended. (b) Intervening calls to be made as necessary at no additional cost. The contrcator shall respond to requests for unscheduled maintenance service no later than the next 8 working hours from time call is received from the Government. (c) The contractor shall provide a telephone number to allow the Government direct contact with a service representative. (2) Preventative maintenance services will normally be performed by the contractor during the Air Force working hours of 8:00 AM to 4:30 PM, Monday through Friday excluding Government holidays. Any services required outside of the normal hours specified above will be ordered under the over and above line item. Maximum downtimes of any equipment shall not exceed twenty-four (24) hours from the time a call is made to the contractor (excluding weekends and holidays). (3) The selected contractor representative performing the work required in this contract will be thoroughly experienced in the operation of repair of monarch marking equipment, Models 9425, 9445 and 415. The period of performance for this contract will run for 15 months from date of award. The Standard Industrial Classification (SIC) code for this acquisition is 7378. The small business size standard is $18.0 million. All responsible small business concerns may submit a quotation which shall be considered by this agency. A Request for Quotation package will be issued for this requirement. Fax requests for the RFQ at 717-770-5689. Your faxed request should include (1) company name and mailing address; (2) telephone and facsimile numbers and (3) company's point of contact. Posted 11/02/99 (W-SN397284). (0306)

Loren Data Corp. http://www.ld.com (SYN# 0069 19991104\J-0012.SOL)