|
COMMERCE BUSINESS DAILY ISSUE OF SEPTEMBER 24,1999 PSA#2440Directorate Of Contracting, Oo-Alc 6050 Gum Lane/Bldg 1215, Hill Air
Force Base, Ut 84056-5825 16 -- ROTATION COLLAR SOL F42630-99-R-22653 DUE 111299 POC PKX-2/Beth
Holt/(FAX)801-777-4569, For additional information contact Landing
Gear/Photo/Likl/[801]777-6501 Item 0001 NSN 1620-00-488-4553 P/N:
4G13565-101B, Transfers rotation power from the lock ring assembly to
the spline tube. The spline tube in turn rotates the piston to allow
the strut to rotate from landing position (0) to retract position (90)
and return again for landing. Dimensions: OD. 10.7385" (over pins)
major 10.7.48" minor 1D6.76" ht 3.5" splined internally & externally.
Material: 300M steel. 48EA. Applicable to: C5a/B M.L.G.. Destn: Hill
Air Force Base, Ut 84056-5825. Delivery:30 Dec 1999 48 ea Item 0002
data, 1 lot Qualification requirements: Sources must be qualified prior
to being considered for award. The solicitation will contain
instructions for obtaining further information on this requirement. The
requirements of FAR 9.202(A) have been completed and copies of the
qualification requirements and standards may be obtained as described
in the solicitation. These qualification requirements apply to line
item(s) all The approximate issue/response date will be 12 OCT 1999.
Electronic procedure will be used for this solicitation. See our Web
page. To: Precision Gear Inc, Corona Ny 11368-2911. To: Eagle Tool &
Machine Co, Springfield Oh 45506-0179. To: All Tools Inc, Cleveland Oh
44144-1105. First article test required. Award will be made only if
the offeror, the product/service, or the manufacturer meets
qualification requirements at the time of award in accordance with FAR
clause 52.209-1. The solicitation identifies the office where
additional information can be obtained concerning qualification
requirements is cited in each individual solicitation. It is suggested
that small business firms or others interested in subcontracting
opportunities in connection with the described procurement make contact
with the firm(s) listed. This proposed procurement is under a 100
percent small business set aside, the size standard for which is 1,000
employees. An Ombudsman has been appointed to hear concerns from
offerors or potential offerors during the proposal development phase of
this acquisition. The purpose of the Ombudsman is not to diminish the
authority of the program director or contracting officer, but to
communicate contractor, concerns, issues, disagreements, and
recommendations to the appropriate government personnel. When
requested, the Ombudsman will maintain strict confidentiality as to the
source of the concern. The Ombudsman does not participate in the
evaluation of proposals or in the source selection process. Interested
parties are invited to call Steve Wall if your concerns are not
satisfied by the contracting officer (801)777-6991. ATTENTION:
Contractor must be registered with Central Contractor Registration to
be eligible for contact award or payment from any DOD activity.
Information on registration and annual confirmation requirements may be
obtained by calling 1-888-227-2423, or via the Internet at
http://ccr.edi.disa.mil This part required engineering source approval
by the design control activity in order to maintain the quality of the
part. Existing unique design capability, engineering skills, and
manufacturing knowledge by the qualified source(s) require acquisition
of the part from the approved source(s). The approved source(s) retain
data rights, manufacturing knowledge, or technical data that are not
economically available to the Government, and the data or knowledge is
essential to maintaining the quality of the part. An alternate source
must qualify in accordance with the design control activity's
procedures, as approved by the cognizant Government engineering
activity. The qualification procedures must be approved by the
Government engineering activity having jurisdiction over the part in
the intended application. This acquisition involves data that are
subject to export control laws and regulations. Only contractors who
are registered and certified with the Defense Logistics Services Center
(DLSC) shall be provided copies of the solicitation or other data
subject to foreign disclosure restrictions. Contact the Defense
Logistics Services Center, 74 Washington Avenue N., Battle Creek,
Michigan 40917-3084 (1-800-352-3572) for further information on the
certification process. You must submit a copy of your approved DD Form
2345, Military Critical Technical Data Agreement, with your request
for the solicitation. !! Posted 09/22/99 (I-SN383293). (0265) Loren Data Corp. http://www.ld.com (SYN# 0152 19990924\16-0023.SOL)
16 - Aircraft Components and Accessories Index Page
|
|