Fleet & Industrial Supply Center, Norfolk Naval Shipyard Annex, Purchase Division, Bldg. 1500, Portsmouth, VA 23709-5000

41 -- MOISTURE SEPARATORS SOL N00181-99-Q-0475 DUE 083199 POC Ronda Rothermel, 757-396-8023 E-MAIL: Contract Specialist's E-mail Address, rothermelrj@nnsy.navy.mil. DESC: IMPORTANT NOTICE: DFARS 252.204-7004 "Required Central Contractor Registration" applies to all solicitations issued on/after 6/1/98. Lack of registration in the CCR database will make an offeror/quoter INELIGIBLE FOR AWARD. Please ensure compliance with this regulation when submitting your quote. Call 1-888-227-24223 or visit the Internet at http://ccr.edi.disa.mil for more information. FISC, NNSY, has a requirement for: LINE ITEM 0001 Moisture Separator, 6'-10" wide X 66"high, two drains per specifications below, 2 each.; LINE ITEM 0002 Moisture Separator, 8'-10" wide X 48"high, two drains per specifications below, 2 each; LINE ITEM 0003 Moisture Separator, 63" wide X 38"high, two drains per specifications below, 1 each; LINE ITEM 0004 Moisture Separator, 61" wide X 38"high, two drains per specifications below, 1 each, LINE ITEM 0005 Moisture Separator, 54" wide X 36"high, two drains per specifications below, 1 each; LINE ITEM 0006 Moisture Separator, 45" wide X 36"high, two drains per specifications below, 1 each; LINE ITEM 0007 Moisture Separator, 36" wide X 11"high, one drain per specifications below, 1 each; LINE ITEM 0008 Moisture Separator, 9'-6" wide X 67"high, two drains per specifications below, 1 each.; LINE ITEM 0009 Moisture Separator, 6'-10" wide X 64"high, two drains per specifications below, 2 each; LINE ITEM 0010 Moisture Separator, 64" wide X 58"high, two drains per specifications below, 2 each; Ordering data for Line Items 0001 through 0006 and 0008 through: Designed specifications as outlined in Peerless Mfg. Co. Dwg.(Proprietary) No. D068-0000 Latest Revision. Operating pressure drop not to exceed .253 inches of water at 950 FPM and 0.3016 inches of water at 1000 FPM. 2. Basic separator configuration utilizing the model P2-XLP Vane Profile (Peerless Proprietary) with unit constructed completely from 316L stainless steel including material for housing, vanes, drain trough and drain pipe nipples. Stainless Steel 316L welds are not required to be annealed. 3. Painting requirements as follows: A. Housing, vanes and drain trough require primer coat (Epoxy Polymide, Type 3, Formula 150, MIL-P-24441/20, Green, Color 24272) and top coat (Epoxy Polymide, Type 3, Formula 151, MIL-P-24441/21, Haze Gray, Color 26270). Drain pipe requires no painting. 4. Separator shall have a 5 inch deep drain trough with 2 nipples, 2" NPS X 1-1/2" long, installed on the bottom near trough ends. 5. Separators will be designed to meet the shock requirements of MIL-S-901C, Grade A. 6. Drain troughs shall have a bolted access plate installed near each drain nipple. Line Item 0007 is the same as above except: 4. Separator shall have a 5 inch deep drain trough with 1 nipple, 2" NPS X 1-1/2" long, installed at the trough center. Delivery is required by 1 December 1999. This is a SOLE SOURCE acquisition and must be manufactured by Peerless Mfg. Co.. Offers shall include manufacturer, payment terms, and anticipated delivery. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and written solicitation will not be issued. Solicitation Number N00181-99-Q-0475 applies. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 97-10 and the Defense Federal Acquisition Circular 97-10, 1998 Edition. FAR 52.203-6, 52.212-1, 52.212-2, 52.212-3, 52.212-4, 52.212-5, 52.246.2 and 52.247-34 and DFAR 252.212.7001, 252.225-7 and 252.225-7012 apply to this acquisition. All items are to be delivered to NNSY, Receiving Officer, Bldg 276, Portsmouth, VA 23709-5000. Inspection/acceptance at destination. Offeror shall include a completed copy of the provision at 52.212-3 Offer representation and certfication-commercial items. NNSY's mercury free clause applies. A copy of clause is available upon request. Offer shall be evaluated for fair and reasonable price, technical acceptability, adherence to applicable clauses, provisions, delivery schedule and satisfactory past performance record. Standard industrial code is 3569; business size standard is 500 employees. This procurement is being conducted under simplified acquisition procedures. Parties responding to this solicitation may submit their quote in accordance with their standard commercial practices (e.g. on company letterhead, formal quote form, etc). But must include the following information: (1) Company's complete mailing and remittance address; (2) Discounts for prompt payment; (3) Anticipated delivery of material; (4) Cage code; (5) Dun & Bradstreet Number (DUNS); (6) Taxpayer ID number; (7) Location of manufacturing facility. Important Internet addresses: 1) Federal Acquisition Regulations (FAR) at http://www.gsa/gov/far; 2) Defense Federal Acquisition Regulation Supplement (DFARS) at http://www.dtic.mil/dfars. Questions/responses to this solicitation should be faxed to 757-396-9895 or mailed to Fleet & Industrial Supply Center, NNSY Annex, Code 532.30, Bldg. 1500, 2nd Fl, Attn: Ronda Rothermel, Portsmouth, VA 23709-5000 or via e-mail. Offers are due by close of business August 31, 1999. Numbered Note 22 applies. Posted 08/26/99 (W-SN372691). (0238)

Loren Data Corp. http://www.ld.com (SYN# 0165 19990830\41-0001.SOL)