USAFE Contracting Squadron/LGC, Unit 3115, APO AE 09094-3115

17 -- AIRCRAFT STANDS FOR C-130 SOL F6152199QG963 DUE 082599 POC j. meyer Contract Buyer 011-49-631-3539-180 E-MAIL: maintenance stands, C-130, james.meyer@ramstein.af.mil. GENERAL SPECIFICATIONS MAINTENANCE STAND FOR C-130 According to photos and specifications listed 1. General: The stands shall be designed for the Isochronal maintenance process on the C-130 aircraft. The stands shall provide access to all necessary maintenance areas around the entire aircraft and allow for the operational clearance all flight control surfaces in the full range of motion. The tail stand shall consist of two halves that can be removed and installed to the tail of the aircraft. 2. Supporting structure: Consisting of a hot dip galvanized tubes and nodes: minimum sizes 42-mm dia., as well as minimum 60-mm dia., or equivalent. 3. Admissible loads: Surface load: minimum 750 N/m2 Concentrated load: minimum 1500N Platforms of large dimension shall be limited to capacity, which has to be defined for the special load cases. 4. Undercarrige: Castor wheels, minimum 280-mm dia., with Skydrol resistant solid rubber tires, fixing spindles (devices) beside each wheel. 5. Access: Stairs, 6660-860mm wide and a 45 to 55-degree inclination with grading steps. 6. Railings: Minimum 1,0m high and mid-railing. Tubes 34 to 42-mm dia., kickboards, and 100 mm high. 7. Platform decking: The platform decking on all stands shall consist of waterproof glued industrial plywood, minimum 20-mm thickness, placed on steel purlins. Padding shall be on all platform edges touching the aircraft. Required delivery time is on or before 180 calendar days after date of award of contract. Coordinating delivery or additional information required contact Mr. Meyer, commercial 001-49-631-3539-180 (Tel) or 247 (Fax). Posted 08/03/99 (W-SN362114). (0215)

Loren Data Corp. http://www.ld.com (SYN# 0260 19990805\17-0001.SOL)