Bid Office, SPAWARSYSCEN, Code D21B, 53570 Silvergate Avenue, Bldg. A33, Room 0061, San Diego, CA 92152-5112

59 -- DIGITAL ELECTRONIC TESTER SOL N66001-99-Q-1777 DUE 080299 POC Purchasing Agent, Claudia A. Aguzar, D211, (619) 553-6330. Contracting Officer, Melissa Dolan, D212, (619) 553-6336. This is a combined synopsis/solicitation prepared in accordance with the format in the Federal Acquisition Regulation, supplemented with information included in this notice. This solicitation incorporates provisions and clauses at FAR 52.213-4 Terms and Conditions -- Simplified Acquisitions (Other Than Commercial Items) (FEB 1998), and any others that are applicable and in effect through the current Federal Acquisition Circular (FAC) and the Defense Acquisition Circular. It is the contractors responsibility to be familiar with all applicable clauses and provisions. No RFQ will be prepared or made available for distribution. While price will be a significant factor in the evaluation of offers, award will be based on responsive, responsible, technically acceptable offers received in response to this CBD advertisement.. Competitive awards may be based on the evaluation criteria stipulated in the Red, Yellow, Green (RYG) Contractor Evaluation System. The evaluation criteria is available upon request. Specifications are as follows: 1) Digital Electronics Tester, qty 1. . Digital Electronics Tester- Specifications. The digital electronics tester shall meet the following minimum specifications: 1. 32 bi-directional VO pins independently programmable for voltage and timing 2.Expandable to 512 pins; 3. Programmable voltage on each pin from -1V to 6V with 50mV resolution and up to 30mA current sinking or sourcing; 4. 32 timing generators with lOOps resolution on edge placement; 5. Slew rate greater than 1.2V/ns on each pin; 6. Not more than 1ns pin to pin clock skew; 7. Variable data rate from 50KHz to 50MHz with 50KHz resolution; 8. Variable clock rate from 50KHz to 200MHz with 50KHz resolutio; 9. 32 bit vector depth of 1 million; 10. Data formats including NRZ, RZ; 11. Three 1A power supplies with 50mV resolution, one supply with 0V to 6V range and two supplies with -15V to +15V range; 12. Current measurement through the power supplies with 1nA resolution; 13. DC parametric measurement on each pin (not simultaneously) with voltage force and measure range of -6V to +6V with 10mV resolution and current force and measure range of -lOOmA to +100mA with 100pA resolution; 14. Independently programmable loads on output pins up to 5mA; 15. DUT board for interfacing to packaged parts with up to 128 pins and preserving the timing specifications in 4, 5, 6, 7, and 8; 16. DUT interface to probe cards on an Electroglas 2001X wafer prober for tester rates up to 500KHz ; 17. Tester programming and control through a windows 98/NT compatible computer with at least a 400MHz Pentium II or equivalent CPU and performing the following functions: a. control of an Description of die pass/fail wafer maps, b programmable pattern generation including branchimg, looping, and subroutine calls and returns, c. memory test algorithms including checkerboard, walking 0, walking 1, marching 0, marching 1, compliment, all zeroes, and all ones, d. VOH/VIL testing, e. DUT continuity and pin leakage testing, f. power supply current measurement, g. functional testing, h. data delay time measurements, i. SHMOO plot generation, j. I/O vector timing graph generation, k. translation of test vectors from CAE platforms18. Portable -- small enough and light enough for one person to move tester from one room to another in the same building on the same floor and small enough and light enough for two people to move tester off site using a van or pickup truck. Interested parties are invited to respond to this synopsis. This document will be posted to the Navy Electronic Commerce Online (NECO) world wide web site at www.neco.navy.mil. No hard copies of this RFQ will be available. Facsimile quotations are acceptable and must be received on or before the COB on the closing date stated above. Facsimile quotations may be sent to (619) 553-4842. Questions may be directed to the Purchasing Agent responsible for this action. The applicable Standard Industrial Code (SIC) and Size Standard is 3825/500. Buyer's e-mail address is aguzar@spawar.navy.mil . Posted 07/16/99 (W-SN355389). (0197)

Loren Data Corp. http://www.ld.com (SYN# 0352 19990720\59-0005.SOL)