Naval Hospital, Materials Management Dept., Purchase Div., Bldg. 81-H, Great Lakes, IL 60088

69 -- TRAINING AIDS & DEVICES SOL 0001 DUE 061499 POC Dominador L. Gavina, Purchasing Agent, (847) 688-4749 ext 122 Contractor shall furnish all labor, equipment, and services necessary to provide training aids and devices to the Naval Hospital,Bldg 200-H, Great Lakes, IL 60088. The Contractor is also required to inspect the on-site location to check the electrical outlets of the on-site location. The point of contact for the on-site location is LT. Steve Patton, (847) 688-2888 ext 127. The following training devices/equipments are needed: Projector, PRO-AV-XGA resolution, 2100 ANSI LUMEN, 38lb, 1 each; Projector ceiling mount kit, 1 each; Ceiling mount upper bracket assembly, 1 each; Monitor 29" diagonal, 27" VIS flat square tech- nology CRT, 15.5 to 50 kHz horizontal scan range; 1024x768 maximum RGB resolution, 2 each; Wall/Yoke TV mount, 2 each; Multisync LCD1510V; 15" viewable TFT active matrix LCD monitor; recommended resolution 1024x768 at 60Hz, 1 each; VHS 4 head HiFi video cassette recorder/player, 1 each; Black textured custom rackshelf 2 to 5 space, 1 each; Visual presenters -- includes top/base lights,composite, S video and RGB outputs, auto-focus, 10x power zoom and is remote control capable and the camera head rotates 360 degrees, 1 each; Universal analog interfaces with active audio buffering metal enclosure; 100 to 240 VAC, 50/60Hz, internal auto switchable; is digitally control, universal analog computer enterface with active audio buffering, 1 each; 1U Rack, metal gray paint, 19" universal rack shelf with 1/2" width enclosure; designed for wide devices, can store two devices such as switchers or amplifiers, 1 each; Laptop breakout cable, VGA analog LBC 35HR, 1 each; MBC interface cables, analog MBC IBM VGA/XGA HR, 1 each; Plenum-BNC-5-100' HRP/30m; five conductor, mini-high resolution coax cables, wrapped in a single CL-2P fire resistant coated jacket, 3 each; Four input, four output projector control switcher with built-in line doubler; metal enclosure; 100 to 240 volts SMPS, 1 each; One input, four output RGB H&V distribution amplifier, metal enclosure; 100 to 240 volts SMPS; ultra high bandwidth RGBS and RGBHV,300 MHz, -3 db bandwidth can distribution RGB & SYNC, 1 each; ADA 19" 3 U rack front panel for H&V models, includes all rackmount hardware to connect to the ADA's, 1 each; Coax cables, BNC-4HR/3.6m; cables include four mini high resolution 75 OHM coaxial BNC cables; color coded with solid red, green, blue and black insulators wrapped in a single jacket, for connecting switches and interface, 1 each; Coax cables,BNC 5-6'HR/1.8m; cables include five mini high resolution 75 OHM coaxial cable, color coded and wrapped in a single jacket, used for CAD and CAM applications, 3 each; Coax cables, BNC-5-25'HR/7.5m; cables include five mini high resolution 75 OHM coaxial cables, color coded and wrapped in a single jacket, sued for CAD and CAM applications, 3 each; Coax cables, BNC-12'HR/3.6m, cables include five mini high resolution 75 OHM coaxial cables, color coded and wrapped in a single jacket, used for CAD and CAM applications, 3 each; 1 x 6 Audio D A, 1 each; Rackmount frame accomodates three units DAT-1, 1 each; DAT-2 Blank panel covers unfilled portion of DAT-1, 2 each; 3RU single well cassette, 1 each; Integrated amplifier 60W, 8 ports, 2 mute buses, black, remote master, 2RU, 1 each; 2RU black rackmount kit for integrated amplifier (above), 1 each; Microphone module LoZ balanced, 600 OHMS, Phantom power LO/HI filters, gain control, 3/5 screw terminal, 1 each; Bridging transformer module -- balanced, 10k OHMS, 3/5 screw terminal, 2 each; Stereo line mixing input with LO/HI cut filters, 1 each; Balanced line output module -- LoZ, 600 OHMS, Balout, signal derived from mix bus, gain control, 3/5 screw terminal, 1 each; One third octave equalizer, 2RU, includes: rackmounts and security covers, 1 each; Dual MIC or line in and dual line out; standard quick connect barrier block or PX- CK2 connect kit, 1 each; Dual bay module housing W/P-12A supply included, 1 each; Rack kit for above housing, 1 each; Supercardioid 18" gooseneck, attached XLR PreAmp shock mount, flange mount, snap fit foam windscreen, 1 each; Control contractor series speakers control 25 with transformer for use on 70.7 & 100V distributed lines, switchable taps at 30W, 15W & 7.5W & 3.7W at 70.7V BLK, 2 each; Boardroom electrol, video format 60" x 80"; 100" nominal diagonal size; white with borders; seamless, 1 each; Single motor low voltage control system, 1 each; Axcess central controllers-integrated axcess system ports; two (2) RS232/422, 12 relay channels, eight (8) IR/Serial & six (6) I/O includes four (4) CCIRC cables, 1 each; Power supply 12VDC, 4.2 A Power Supply, regulated 110 VAC input, 1 each; Axcess central controller, mounting hardware/ accessory rack kit, 1 each; Transmitter 32 button transmitter, RF 38/455 kHz IR, 1 each; Control panel accessories, IF/IR Receivers/Sensors, RF Receiver, Axlink, 1 each; Axlink bus controllers three (3) channel volume controller, line level audio, 1 each; Control system accessories, contact closure interfaces universal power/motor controller, 20A, 110/220 VAC, 1 each; Version 1.5 AMX operational program, 1 each; TX37A Transmitter includes antenna & power suppy, 1 each; RX1A Receiver includes a single earbud, 1 each; Single rack mount kit, 1 each; BC10 Battery Charger, 1 each; Lectern, that will house supplied LAN CPU, Document LCD Monitor and miscellaneous equipment, 1 each; Lectern AUX video input connector panel, 1 each; Wall plate with 3 sets of 15 BNC's and one connector for the 70V speaker line, 1 each; Cable, terminators and miscellaneous hardware, 1 each; Provide design, engineering, documentation, fabrication, delivery, installation, setup and checking of equipments, 1 each; Labor, 1 lot. Posted 05/13/99 (W-SN331136). (0133)

Loren Data Corp. http://www.ld.com (SYN# 0347 19990517\69-0001.SOL)