Fleet & Industrial Supply Center, Norfolk Naval Shipyard Annex, Purchase Division, Bldg. 1500, Portsmouth, VA 23709-5000

20 -- VALVES SOL N0018199Q0049 DUE 032999 POC Jacqueline Nichols, (757)396-8366 E-MAIL: jnichols@sy.nnsy.navy.mil, jnichols@sy.nnsy.navy.mil. DESC: IMPORTANT NOTICE; DFARS 252.204-7004 "Required Central contractor Registration" applies to all solicitations issued on/after 6/1/98. Lack of registration in the CCR database will make an offeror/quoter INELIGIBLE FOR AWARD. Please ensure compliance with this regulation when submitting your quote. Call 1-888-227-24223 or visit the Internet at htt;://ccr.edi.disa.mil for more information. This announcement is published as a Total Small Business Set-Aside action per FAR 52.219-1 and 52.219-6 (this means you must be a small business, quoting the product of a small-business manufacturer); all eligible, responsible sources may submit an offer. FISC, NNSY, has a requirement for: LINE ITEM 0001 -- Valve, 1-1/2" ball, 316 SS body, schedule 40 buttweld end connections, 316 SS ball and stem, UHMWPE seats and body seal, with locking lever handle, assembled with no lubrication. Worchester P/N 1.5 4466 U BW4 or equal end prep to be manual U-grove in accordance with dwg 138/C202/97, 41 each. The following additional requirements applies to both ITEM 0001 and ITEM 0002: Valve -- bi-directional flow, three piece design, valve pressure rating -- 1480 psi, body and pipe ends -- CF8M 316 stainless steel, end connections -- See comment 2, ball -- ASTM A479 Grade 316 stainless steel, stem -- ASTM A479 Stainless steel, upstream and downstream seat -- ultra high molecular weight polyethylene (UHMWPE), body seals -- UHMWPE, stem seals -- UHMWPE, belleville washers -- 301 stainless steel, body bolts -- Grade B8 zinc plated stainless steel, nuts -- Grade 8 zinc plated stainless steel, handle -- locking handle, vinyl coated, name plate -- stainless, additional requirements: 1. the valve must have a Live Loaded, High Cycle Sem Packing with one set of stainless steel belleville washers. The valve should be three piece design, ANSI B16.25 schedule 40, 316 stainless steel, valve markings to MSS SP25. 2. Valve shall have been tested to bubble-tight standards. 3. Assembled dry: no lubricant. 4. Valve end prep shall be Manual U-Grove in accordance with dwg 138/C-202/97. LINE ITEM 0002 -- Valve, 2" ball, 316 SS body, schedule 40 buttweld end connections, 316 SS ball and stem, UHMWPE seats and body seal, with locking lever handle, assembled with no lubrication. Worcester P/N 2K 4466 U BW4 or equal, end prep to be manual U-grove in accordance with 138/C202/97, 1 each. LINE ITEM 0003 -- Valve, control ball, 1-1/2" NPS, schedule 40S, BW, ANSI B16.34, 316 cres body with 316 SS metal G 60 degree v-seat upstream, UHMW polyethylene round seat downstream, magna plate ball, with locking handle, no lubrication, UHMWPE body seals and stem seals, graphite seat back seal on v-seat, Worcester P/N 1-1/2" CPT4466U BW4 G60 OR EQUAL, end prep to be manual U-grove in accordance with 138/C202/97, 9 each. Valve -- bi-directional flow, three piece design, throttling, valve pressure rating -- 1000 psig, body and pipe ends -- CF8M 316 stainless steel, end connections -- see comment 2 below, ball -ASTM A479 grade 316 stainless steel with magna plate coating, stem -- ASTM A564 condition A, 17-4 PH stainless steel, upstream seat -- graphite impregnated sintered stainless steel, 60 degree V, characterized for throttling flow, downstream seat -- ultra high molecular weight polyethylene (UHMWPE), body seals -- UHMWPE, seat seal -- graphite, stem seals -- UHMWPE, belleville washers -- 301 stainless steel, body bolts -- grade B8 zinc plated stainless steel, nuts -- grade 8 zinc plated stainless steel, handle -- locking handle, vinyl coated, name plate -- stainless steel, additional requirements: 1. the valve must have a Live Loaded, High Cycle Stem Packing with two sets of stainless steel belleville washers. 2. The valve must have super round ball and matched stem. The ball and stem engagement is to be free of play to eliminate hysteresis. The valve should be able to handle a pressure drip of 500 psi. The valve should be rotary design, compact, and low weight. 3. Valve shall have been tested to bubble-tight standards. 4. Assembled dry; no lubricant. 5. Valve end prep shall be Manual U-grove in accordance with 138/C-202/97. Offers shall include manufacture, payment terms, and anticipated delivery. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and written solicitation will not be issued. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 97-09. FAR provision 52.212-1, 52.212-2, 52.212-4, 52.212-5, 52.246.2 and 52.247-34 and DFAR 252.212.7000 and 252.204.7000 apply to this acquisition. All items are to be delivered to NNSY, Receiving Officer, Bldg 276, Portsmouth, VA 23709-5000. Inspection/acceptance at destination. Offeror shall include a completed copy of the provision at 52.212-3 Offer representation and certfication-commercial items. NNSY's mercury free clause applies. A copy of clause and dwg is available upon request. Offer shall be evaluated for fair and reasonable price, technical acceptability, adherence to applicable clauses, provisions, delivery schedule and satisfactory past performance record. Standard industrial code is 3491; business size standard is 500 employees. This procurement is being conducted under simplified acquisition procedures. Questions/responses should be faxed to 757-396-8366. Offers are due by close of business March 29, 1999. Posted 03/16/99 (W-SN308955). (0075)

Loren Data Corp. http://www.ld.com (SYN# 0203 19990318\20-0002.SOL)