|
COMMERCE BUSINESS DAILY ISSUE OF MARCH 4,1999 PSA#2295Directorate Of Contracting, Oo-Alc 6050 Gum Lane/Bldg 1215, Hill Air
Force Base, Ut 84056-5825 16 -- ROD, POSITIONER, LANDING GEAR SOL F42630-99-Q-22545 DUE 041299
POC For copy, PKX-2/Pamala Chaffee/(FAX)801-777-7522, For additional
information contact Landing Gear/Photo/Likl/[801]777-6501 WEB: Click
here to obtain/view solicitation.,
http://contracting.hill.af.mil/html/3099q22545/com3099q22545.htm.
E-MAIL: Click Here to E-mail Buyer*****, LEERC@HILLWPOS.HILL.AF.MIL.
Item 0001 NSN 1620-00-814-3332 P/N: 4G13153-103A, Pitch positioner cyl.
Dim: 2 1/2" OD X 18" long. Material: steel. Function: cylinder rod for
the pitch positioner cylinder. 37ea. Applicable to: C-5 A/C. Destn:
Hill Air Force Base, Ut 84056-5825. Delivery:30 Dec 1999 37 ea Item
0002 data, 1 lot Qualification requirements: Sources must be qualified
prior to being considered for award. The solicitation will contain
instructions for obtaining further information on this requirement. The
requirements of FAR 9.202(A) have been completed and copies of the
qualification requirements and standards may be obtained as described
in the solicitation. These qualification requirements apply to line
item(s) all The approximate issue/response date will be 22 MAR 1999.
The anticipated award date will be 12 Apr 1999. Written procedure will
be used for this solicitation. To: Eagle Tool & Machine Co,
Springfield Oh 45506-0179. To: Special Projects Mfg Co Inc, Fort Worth
Tx 76108-2530. To: Arkwin Industries Inc, Westbury Ny 11590-5018.
First article test required. No telephone requests. Only written or
faxed requests received directly from the requestor are acceptable. All
responsible sources solicited may submit a bid, proposal, or quotation
which shall be considered. Award will be made only if the offeror, the
product/service, or the manufacturer meets qualification requirements
at the time of award in accordance with FAR clause 52.209-1. The
solicitation identifies the office where additional information can be
obtained concerning qualification requirements is cited in each
individual solicitation. It is suggested that small business firms or
others interested in subcontracting opportunities in connection with
the described procurement make contact with the firm(s) listed. Request
for copies of solicitations must reference the entire solicitation
number, including purchasing office identification number. To expedite
your request, limit the number of individual solicitation numbers
requested per letter to not more than 10. Don't request information on
this requirement until after the issue date. This proposed procurement
is under a 100 percent small business set aside, the size standard for
which is 1,000 employees. An Ombudsman has been appointed to hear
concerns from offerors or potential offerors during the proposal
development phase of this acquisition. The purpose of the Ombudsman is
not to diminish the authority of the program director or contracting
officer, but to communicate contractor, concerns, issues,
disagreements, and recommendations to the appropriate government
personnel. When requested, the Ombudsman will maintain strict
confidentiality as to the source of the concern. The Ombudsman does not
participate in the evaluation of proposals or in the source selection
process. Interested parties are invited to call Lt Col Allen H. Brody
if your concerns are not satisfied by the contracting officer
(801)777-6991. ATTENTION: Contractor must be registered with Central
Contractor Registration to be eligible for contact award or payment
from any DOD activity. Information on registration and annual
confirmation requirements may be obtained by calling 1-888-227-2423, or
via the Internet at http://ccr.edi.disa.mil This part required
engineering source approval by the design control activity in order to
maintain the quality of the part. Existing unique design capability,
engineering skills, and manufacturing knowledge by the qualified
source(s) require acquisition of the part from the approved source(s).
The approved source(s) retain data rights, manufacturing knowledge, or
technical data that are not economically available to the Government,
and the data or knowledge is essential to maintaining the quality of
the part. An alternate source must qualify in accordance with the
design control activity's procedures, as approved by the cognizant
Government engineering activity. The qualification procedures must be
approved by the Government engineering activity having jurisdiction
over the part in the intended application. This acquisition involves
data that are subject to export control laws and regulations. Only
contractors who are registered and certified with the Defense Logistics
Services Center (DLSC) shall be provided copies of the solicitation or
other data subject to foreign disclosure restrictions. Contact the
Defense Logistics Services Center, 74 Washington Avenue N., Battle
Creek, Michigan 40917-3084 (1-800-352-3572) for further information on
the certification process. You must submit a copy of your approved DD
Form 2345, Military Critical Technical Data Agreement, with your
request for the solicitation. See Note (s) 1,26. Posted 03/02/99
(I-SN303872). (0061) Loren Data Corp. http://www.ld.com (SYN# 0153 19990304\16-0018.SOL)
16 - Aircraft Components and Accessories Index Page
|
|