|
COMMERCE BUSINESS DAILY ISSUE OF DECEMBER 24,1998 PSA#2249US ARMY MATERIEL COMMAND ACQUISITION CTR, WHITE SANDS MISSILE RANGE
DIVISION, STEAA-WS (BLDG 126W), WSMR NEW MEXICO 88002-5201 66 -- BIOSTAT D 200 OR NBS 200 INDUSTRIAL FERMENTER SOL
DAAD07-99-R-0103 DUE 011299 POC Contract Specialist Margaret Carrillo
(505) 678-5455 (Site Code DAAD07) This synopsis is for a firm-fixed
price contract for the following commercial item prepared in accordance
with FAR Subpart 12.6. Biostat D 200 or NBS 200 Industrial Fermenter,
200 Liter (150 I Working Volume) pilot scale, with the following
features: -200 liter total capacity; 150 liter working volume; -vessel
interior 316 L stainless electropolished to 8-20 RA; -vessel exterior
insulated and finished with bead blast or similar; -bottom drive
agitation mechanism with 3 Rushton impellers; 3-5HP; -double mechanical
seal with sterile condensate lubrication; -backpressure regulator for
above; -four (4) 316 SS vessel interior baffles; fixed or non fixed;
-agitation speed control 45-500 rpm +-1% fullscale; -aeration 4-200
slpm +/-2%; controlled by mass flow controller; -air thru "T style"
316SS housing, with 5" Sartorious PTFE 0.2 filter; -exhaust air thru
same style system as above; -all connections where applicable, will be
sanitary "Tri-clamp" design; -Load cells for determining vessel
contents volume; -three (3) resterilizable addition ports; acid, base,
and AF. -backpressure regulator for controlling vessel pressure
regardless of inlet air 1pm; -high foam alarm via conductivity probe
(fixed height); -adjustable height conductivity foam sensor; mounts in
head plate "Tri-clamp"; -Ingold polarographic dissolved oxygen (DO)
probe; with hardware; PID control; -Ingold gel filled pH probe; with
all cables/hardware; -harvest and sample ports will be resterilizable;
and easily maintained; -all sanitary piping will be self draining with
a minimum of dead legs; -ergonomic design for ease of operator access
to filters, valves, pumps, etc.; -automatic sterilization cycle; empty
or full; inlet & exhaust sterilized w/vessel; -optical
density/turbidity probe with all requisite hardware; -- -dual heat
exchangers; plate style for cooling; tube and shell for heating; -NEMA
4X control cabinet; with digital microprocessor control; -exhaust
condenser. The desired delivery date is four to six months after
contract award. Asolicitation will be issued on or about January 12
with an estimated closing date of January 25, 1999. Interested concerns
should request copies of this solicitation within 15 days of original
published synopsis. The desired delivery date is four to six months
after contract award. Solicitation requests should be sent to Chris
Brusuelas at the address listed above or faxed to (505) 678-5107. This
requirement is unrestricted. The applicable SIC Code is 3821 and the
Small Business size standard is 500 employees. Posted 12/22/98
(I-SN282717). (0356) Loren Data Corp. http://www.ld.com (SYN# 0350 19981224\66-0013.SOL)
66 - Instruments and Laboratory Equipment Index Page
|
|