Commercial Acquisition Department, Bldg 11, Naval Undersea Warfare Center Division, Newport, Code 59, Simonpietri Dr., Newport, RI 02841-1708

70 -- HIGH SPEED WINDOWS NT BASED ANALOG RECORDING AND PLAYBACK SOL N66604-99-Q-0949 DUE 011199 POC J. Clermont, Contract Negotiator at (401) 832-1460; J. Masterson, Contracting Officer at (401) 832-1585; FAX (401) 832-4820. WEB: Naval Undersea Warfare Center Division, Newport, http://www.npt.nuwc.navy.mil/contract/. E-MAIL: Jeannie Clermont, Contract Negotiator, clermontjm@npt.nuwc.navy.mil. The Naval Undersea Warfare Center Division Newport, Newport, Rhode Island intends to procure One (1) High Speed Windows NT Based Analog Recording and Playback System on a Brand Name or Equal Basis to RC Electronics, Inc., Santa Barbara, California. Performance Specifications are listed below. A Supply type Purchase Order with Firm Fixed Price (FFP) provisions will be issued to the successful offeror. Requests for quotation under N66604-99-Q-0949 are being solicited by this synopsis. This acquisition will be conducted in accordance with FAR Part 12 Acquisition of Commercial Items and FAR Part 13 and Simplified Acquisition Procedures. The parts are RC Electronics, Inc. parts: (1) CLIN 0001 -- R. Datamax-8 channel digital recorder (2) CLIN 0002 -- DTX-10T Ethernet (3) CLIN 0003 -- DTX-GT ITL gate (4) CLIN 0004 -- DTX-AITIN Tape Backup (5) CLIN 0005 -- PMA-1. The characteristics/performance specifications are: (1) General: The requirement is for a high speed analog recording and playback system (data recorder) with 8 analog input channels recorded at 16 bits and up to 90 kHz per channel. The system shall be installed into a Pentium based PC or equal running the Windows NT (New Technology) operating system or equal multi-tasking operating system (UNIX, Linux, etc.). (2) The system shall come with programmable gain amplifiers, simultaneous sampling and programmable anti-aliasing filters, 18 gigabytes of storage disk. (3) The analog input channels shall be sampled at 16-bit resolution with conversation rate sufficient to achieve 90 -KiloHertz (kHz) analog bandwidth per channel. Sampling shall be simultaneous. The sampling rates shall be software selectable from 100 kHz to 200 kHz. (4) The input voltage range shall be software selectable in ranges between +/- 40 volts down to +/- 400 millivolts with an amplifier frequency response that is flat to 90 kHz. (5) The Anti-Aliasing filters shall be a linear phase delay type or equal with a stopband of attenuation greater than 180 dB per octave with a selectable cutoff between 100 Hz to 90 kHz. Passband ripple shall be less than .001dB. (6) There will be eight channels of analog input with greater than 1M Ohm input resistance and over voltage protection of +/- 250 volts on differential inputs. The input connections shall be Baynot Nut Connector (BNC) or equally available commercial type. (7) The data recording system shall have a Graphical User Interface (GUI) that permits all aspects of the recording and display system to be controlled from the Windows NT host machine. All control and display software shall come with the recording system. (8) The system shall have set up files containing all of the recording parameters. These files can be created, modified, saved and recalled under GUI control. (9) The system shall be able to visually review recorded waveforms on the computer screen with forward and fast forward functions. The reviewed data shall be exportable, with the ability to mark and save selected portions of the data in binary or ASCII format. (10) All data recording parameters, including analog bandwidth, anti-aliasing filter cutoff frequency, sample rate, input voltage, scaling, offset, on/off channels, and channel text notation shall be accessible from front panel GUI controls. (11) The system shall come with a real-time display for viewing of recorded data. (12) The system shall come with an Ethernet capability for network operation and come with an external or software controlled TTL (Two Transistor Logic) gated data acquisition trigger. (13) The system shall come integrated into a Windows NT rack mounted workstation. The system shall come with an integrated display versus a separate monitor. The system shall come with attached keyboard and mouse, a minimum of 18 Gigabytes of hard drive for storage, sufficient RAM to run all recording software and display software in real time for all eight channels simultaneously, a floppy disk and a CD ROM drive, and a built-in AIT (Advanced Intelligent Tape) internal tape or equal tape backup unit. (14) The system shall come with all nominal user guides, operating guides, reference manuals, installation instructions, and all software on media compatible with recording unit. (15) It shall be possible to load analysis software such as Matlab onto the Windows NT based recording system. (16) The system shall come with all necessary power and equipment cords to configure and operate system. (17) The system shall come with a one-year warranty, all necessary licenses, and one year of technical and software support. Delivery will be F.O.B. Destination, Newport,RI by 1 February 1999. All information technology equipment must be Year 2000 compliant. All responsible sources may submit a proposal which shall be considered by the Government. The SIC Code for this procurement is 3825, 500 employees. This is 100% set aside for small business. Responses are due by 2:00 p.m. EST 01/11/99; faxed quotes may be sent to J. M. Clermont at (401) 832-4820. Estimated RFP release date is: 12/15/98. Posted 12/04/98 (W-SN277294). (0338)

Loren Data Corp. http://www.ld.com (SYN# 0315 19981208\70-0004.SOL)