GSA, FSS, TACC, TAD II (6FESP-E7), 1500 E. Bannister Road, Kansas City, MO 64131

51 -- DRILL, TWIST -- THREADED SHANK SOL SPQ-98-G5-0006 DUE 090398 POC Pamela D. Waters PH: 816-823-1290, FAX: 816-926-3678 This synopsis will cover the requirements for the following National Stock Numbers for the Next 12 months. We desire destination prices for the Contiguous United States, which will be good for twelve months. This pricing will be used for a standing price quote for a period of up to twelve months. Bar-coding is required. Inspection will be at origin. Delivery 90DARO Award will be item by item Unit of issue is DOZEN The Present Requirements are: 5133-00-435-3246 2,004 DZ. ( divided between 5 purchase orders) 5133-00-435-3267 1,734 DZ. (divided between 4 purchase orders) 5133-00-435-3277 1,956 DZ (divided between 5 purchase orders) Total estimated 12 month demand: 5133-00-435-3246 -- 4,00 DZ. 5133-00-435-3267 -- 9000 DZ 5133-00-435-3277 -- 4600 DZ. Beware that these are merely estimates and could be higher or lower. 5133-00-435-3246 UI: DZ DRILL, TWIST: DESCRIPTION Shall be in accordance with National Aerospace Standard NAS 965, List of Current Sheets, Revision 5, dated August 29, 1997. Type:B. (Short series). Drill size: 21. WORKMANSHIP Details of workmanship shall be in accordance with the best commercial standards and practices. Paints, coatings, platings, and finishes shall be smooth, dry, adherent, continuous, and not stained or discolored. Fasteners shall be firmly secured and show no evidence of deformation, cross threading, or hazardous burrs. Adhesives and lubricants adequate for their intended purpose shall be properly and neatly applied. Adhesives shall be adequately cured. Wires and cables shall be neatly dressed and shall not be frayed or in contact with sharp edges. Wire and cable insulation shall show no evidence of burns, abrading, or pinch marks. There shall be no interference, binding, or galling of parts. External and bearing surfaces shall be free of tool and gouge marks, nicks, or other surface imperfections. The item shall be clean and free of corrosion and debris (e.g., chips, shavings, slivers) or other foreign material. The item shall be free from manufacturing workmanship defects (e.g., loose, missing, binding or misaligned parts, sharp or rough external edges, corners or surfaces) and material workmanship defects (e.g., pits, rips, fins, burrs, tears, nodules, cracks, blisters) which may adversely impact the item's serviceability, durability, safety, or appearance. PACKAGING Twelve (12) items shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage. PACKING The unit packages shall be packed in a close fitting fiberboard box, grade 200 minimum. The complete pack shall be in compliance with the Uniform Freight Classification and the National Motor Freight Classification. MARKING All unit, intermediate, exterior shipping containers, and palletized or unitized loads shall be marked for delivery to civilian activities in accordance with latest version of FED-STD-123 or for delivery to military activities in accordance with latest version of MIL-STD-129, as applicable. 5133-00-435-3267 UI: DZ DRILL, TWIST: DESCRIPTION Shall be in accordance with National Aerospace Standard NAS 965, List of Current Sheets, Revision 5, dated August 29, 1997. Type B -- Threaded Hexagonal Shank; short series; drill size 30. WORKMANSHIP Details of workmanship shall be in accordance with the best commercial standards and practices. Paints, coatings, platings, and finishes shall be smooth, dry, adherent, continuous, and not stained or discolored. Fasteners shall be firmly secured and show no evidence of deformation, cross threading, or hazardous burrs. Adhesives and lubricants adequate for their intended purpose shall be properly and neatly applied. Adhesives shall be adequately cured. Wires and cables shall be neatly dressed and shall not be frayed or in contact with sharp edges. Wire and cable insulation shall show no evidence of burns, abrading, or pinch marks. There shall be no interference, binding, or galling of parts. External and bearing surfaces shall be free of tool and gouge marks, nicks, or other surface imperfections. The item shall be clean and free of corrosion and debris (e.g., chips, shavings, slivers) or other foreign material. The item shall be free from manufacturing workmanship defects (e.g., loose, missing, binding or misaligned parts, sharp or rough external edges, corners or surfaces) and material workmanship defects (e.g., pits, rips, fins, burrs, tears, nodules, cracks, blisters) which may adversely impact the item's serviceability, durability, safety, or appearance. ITEM MARKING Each item (including all items within a set or kit) shall be marked with the manufacturer's name and identifying symbol, and the state or country of manufacture, unless otherwise specified. All marking shall be engraved, etched, molded, indented, or put on with permanent ink in such a manner that it remains clearly legible throughout the life of the item. PACKAGING Twelve (12) items shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage. PACKING The unit packages shall be packed in a close fitting fiberboard box, grade 200 minimum. The complete pack shall be in compliance with the Uniform Freight Classification and the National Motor Freight Classification. MARKING All unit, intermediate, exterior shipping containers, and palletized or unitized loads shall be marked for delivery to civilian activities in accordance with latest version of FED-STD-123 or for delivery to military activities in accordance with latest version of MIL-STD-129, as applicable. 5133-00-435-3277 UI: DZ DRILL, TWIST: DESCRIPTION Shall be in accordance with National Aerospace Standard NAS 965, List of Current Sheets, Revision 5, dated August 29, 1997. Type B -- Threaded Hexagonal Shank; short series; drill size 40. WORKMANSHIP Details of workmanship shall be in accordance with the best commercial standards and practices. Paints, coatings, platings, and finishes shall be smooth, dry, adherent, continuous, and not stained or discolored. Fasteners shall be firmly secured and show no evidence of deformation, cross threading, or hazardous burrs. Adhesives and lubricants adequate for their intended purpose shall be properly and neatly applied. Adhesives shall be adequately cured. Wires and cables shall be neatly dressed and shall not be frayed or in contact with sharp edges. Wire and cable insulation shall show no evidence of burns, abrading, or pinch marks. There shall be no interference, binding, or galling of parts. External and bearing surfaces shall be free of tool and gouge marks, nicks, or other surface imperfections. The item shall be clean and free of corrosion and debris (e.g., chips, shavings, slivers) or other foreign material. The item shall be free from manufacturing workmanship defects (e.g., loose, missing, binding or misaligned parts, sharp or rough external edges, corners or surfaces) and material workmanship defects (e.g., pits, rips, fins, burrs, tears, nodules, cracks, blisters) which may adversely impact the item's serviceability, durability, safety, or appearance. PACKAGING Twelve (12) items shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage. PACKING The unit packages shall be packed in a close fitting fiberboard box, grade 200 minimum. The complete pack shall be in compliance with the Uniform Freight Classification and the National Motor Freight Classification. MARKING All unit, intermediate, exterior shipping containers, and palletized or unitized loads shall be marked for delivery to civilian activities in accordance with latest version of FED-STD-123 or for delivery to military activities in accordance with latest version of MIL-STD-129, as applicable. Posted 08/18/98 (W-SN238379). (0230)

Loren Data Corp. http://www.ld.com (SYN# 0302 19980820\51-0002.SOL)