|
COMMERCE BUSINESS DAILY ISSUE OF JULY 31,1998 PSA#2149NASA/Langley Research Center, Mail Stop 144, Industry Assistance
Office, Hampton, VA 23681-0001 93 -- VESPEL MATERIAL SOL 1-168-DAE.1203 DUE 081798 POC Kimberly D.
Duncan, Purchasing Agent, Phone (757) 864-3566, Fax (757) 864-8863,
Email k.d.duncan@larc.nasa.gov -- James W. Cresawn, Contracting
Officer, Phone (757)-864-2500, Fax (757) 864-7898, Email
J.W.CRESAWN@larc.nasa.gov WEB: Click here for the latest information
about this notice,
http://nais.nasa.gov/EPS/LaRC/date.html#1-168-DAE.1203. E-MAIL:
Kimberly D. Duncan, k.d.duncan@larc.nasa.gov. This notice is a combined
synopsis/solicitation for commercial items prepared in accordance with
the format in FAR Subpart 12.6, as supplemented with additional
information included in this notice. This announcement constitutes the
only solicitation; quotes are being requested and a written
solicitation will not be issued. This procurement is being conducted
under the Simplified Acquisition Procedures (SAP). 2 each of 10 x 10 x
1 vespel plaque; 7 each 10 x 10 x 3/4 vespel plaque; 10 each 5 x 5 x
3/4 vespel material; with the following salient features: Properties of
Vespel SP-211 (or equal with the following salient features):
Property-ASTM Test Method-Value as listed in this order: Mechanical
Ultimate Tensile Strength at 73 degrees F-D-1708-6,500 psi; Ultimate
Tensile Strength at 500 degrees F-D-1708-3,500 psi; Ultimate Elongation
at 73 degrees F-D-1708-3.5 percent; Ultimate Elongation at 500 degrees
F-D-1708-3.0 percent; Ultimate Flexural Strength percent 73 degrees
F-D-790-10,000 psi; Ultimate Flexural Strength percent 500 degrees
F-D-790-5,000 psi; Flexural Modulus percent 73 degrees F-D-790-450,000
psi; Flexural Modulus at 500 degrees F-D-790-200,000 psi; Compressive
Stress at 1 percent Strain-D-695-3,000 psi; at 10 percent
Strain-D-695-14,800 psi; at 0.1 percent Offset-D-695-5,400 psi;
Compressive Modulus at 73 degrees F-D-695-300,000 psi; WEAR and
FRICTION: Friction Coefficient **PV-25,000-.12; PV-100,000-.08; Static
in Air-.20; THERMAL: Coefficient of Linear Expansion at 73 degrees
F-572 degrees F-E-228-30 x 106 in/in/degrees F; Thermal Conductivity at
104 degrees F-5.3 BTU-in divided by hr-ft 2-degrees F; Deformation
under 2000 psi Load at 122 degrees F-D-621-.13 percent; OTHER
PROPERTIES: Water Absorprtion 24 hrs percent 73 degrees F-D-570-.21
percent; 48 hrs at 122 degrees F-D-570-.49 percent; Specific
Gravity-D-792-1.55; Hardness-D-785-1-20 Rockwell "E": **Steady State,
unlubricated in Air. All dimensions are in inches. The provisions and
clauses in the RFQ are those in effect through FAC 97-05. The SIC code
and the small business size standard for this procurement are 2821 and
750 employees, respectively. The quoter shall state in their quotation
their size status for this procurement. All qualified responsible
business sources may submit a quotation which shall be considered by
the agency. Delivery to NASA Langley Research Center, Hampton, VA is
required 45 days ARO. Delivery shall be FOB Destination. The DPAS
rating for this procurement is DO-C9. Quotations for the items(s)
described above may be mailed or faxed to the identified point of
contact, by the date/time specified and include, solicitation number,
FOB destination to this Center, proposed delivery schedule,
discount/payment terms, warranty duration (if applicable), taxpayer
identification number (TIN), identification of any special commercial
terms, and be signed by an authorized company representative. Quoters
are encouraged to use the Standard Form 1449,
Solicitation/Contract/Order for Commercial Items form found at URL:
http://procure.arc.nasa.gov/Acq/Standard_Forms/Index.html to submit a
quotation. Quoters shall provide the information required by FAR
52.212-1. Please note that payments are to be made by electronic funds
transfer, accordingly, you must provide the mandatory information for
electronic funds transfer with your representations and
certifications. Failure to provide this information may delay or
prevent the receipt of payments through the Automated Clearinghouse
Payment System. If the end product(s) quoted is other than domestic end
product(s) as defined in the clause entitled "Buy American Act --
Supplies," the quoter shall so state and shall list the country of
origin. The Representations and Certifications required by FAR 52.2l2-3
may be obtained via the internet at URL:
http://ec.msfc.nasa.gov/msfc/pub/reps_certs/sats/ FAR 52.212-4 is
applicable. Addenda to FAR 52.212-4 are as follows: 52.214-34,
52.214-35, 1852.215-84, 1852.225-73 FAR 52.212-5 is applicable and the
following identified clauses are incorporated by reference. 52.222-3,
52.233-3, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-3
Questions regarding this acquisition must be submitted in writing no
later than August 12, 1998. Quotations are due by 4:30 p.m., local
time, August 17, 1998, to the address specified above. Selection and
award will be made (on an aggregate basis) to the lowest priced,
technically acceptable quoter. Technical acceptability will be
determined by information submitted by the quoter providing a
description in sufficient detail to show that the product quoted meets
the Government's requirement. Quoters must provide copies of the
provision at 52.212-3, Offeror Representation and Certifications --
Commercial Items with their quote. See above for where to obtain copies
of the form via the Internet. An ombudsman has been appointed -- See
Internet Note "B". It is the quoter's responsibility to monitor this
site for the release of amendments (if any). Potential quoters will be
responsible for downloading their own copy of this combination
synopsis/solicitation and amendments (if any). Posted 07/29/98
(D-SN229792). (0210) Loren Data Corp. http://www.ld.com (SYN# 0432 19980731\93-0001.SOL)
93 - Nonmetallic Fabricated Materials Index Page
|
|