US Army, CECOM Acquisition Center, Ft. Monmouth, New Jersey 07703-5008

58 -- ELECTROMAGNETIC PULSE PROTECTION UNITS SOL NA DUE 041098 POC Point of Contact -- Nathan Smith, (732) 532-9210 x5633 E-MAIL: Click here to email the POC, smithn@doim6.monmouth.army.mil. Electromagnetic Pulse Protection Units. This is a market survey to locate potential sources of supply for a Commercial Off-The Shelf (COTS) Electromagnetic Pulse Protection Units meeting the following requirements: Input power 115/230 Vac (commercial power), Output power 115/230 Vac 3.2 amps max, AC input line cord shall be 10 feet, AC output line cord shall be 10 feet, Standard NIMA Power Connectors, Footprint not to exceed 12 x 18 x 6 inches, HEMP survivability: low risk EMP protection will be E1, E2, & E3 pulses as defined per Mil-Std-188-125A, HEMP Protection for Ground Based Performing Critical, Time Urgent Missions. The source shall demonstrate that the TSCTR shall not sustain permanent damage; when powered by commercial power (from European Power Grid) through the Electromagnetic Pulse Protection Unit and simultaneously pulsed with electromagnetic field pulses and induced Pulse current injection pulses (E1, E2, & E3 EMP pulses) as defined per Mil-Std-188-125A. Any interested sources withsuitable Electromagnetic Pulse Protection Units must send technical information to include, but not be limited to, detailed product specification, available test data, schedule availability and cost information, NLT 10 Apr 1998, to Bldg 210, ATTN: AMSEL-RD-ST-SE-TA (Nathan Smith), Fort Monmouth, NJ 077003. Contractors shall also include information on any open DOD contractual vehicles for the subject equipment, to include GSA schedules. All questions should be addressed to Mr. Nathan Smith, (732) 532-9210x5633. Email address: smithn@ doim6.monmouth.army.mil. (0063)

Loren Data Corp. http://www.ld.com (SYN# 0364 19980306\58-0016.SOL)