US Army, CECOM Acquisition Center, Ft. Monmouth, New Jersey 07703-5008

99 -- A3131805 TOOL KIT SOL DAAB07-97-R-C374 DUE 091597 POC Point of Contact -- Grace A. BATTLE, Contract Specialist, 732-427-1654. Contracting Officer -- Edward F. Schindel, 732-532-4847. E-MAIL: TOOL KIT, schindel@doim6.monmouth.army.mil. This acquisition is to procure 350 Tool Kits. At a minimum the contractor shall purchase all tools and tool boxes for the A3131805 tool kit,and place these tools in the tool box. The 350 tool kits shall be built and shipped to the address provided below no later than 01 April 1998,: ITT A/CD Corporation, 7310 Innovation Boulevard, Fort Wayne, Indiana 46801, M/F: DAAB07-95-C-C403, O/N-373 Tool Kits, ATTN: Ms. Cheryl Womack. Provided here is the A3131805 Tool Kits Item List. The list provides NSN#, Item Name, Part Number and Quantity required per Tool Kit:5120-01-367-3497,Bit,Screwdriver,A3018041-2, Qty 1;5120-00-935-7441,Socket, Socket Wrench,A3131734-1,Qty 1;5136-01-258-8321,Tap, Thread Cutting,A3131738-4,Qty 1;5120-00-816-5704,Inserter, Screw Thread,A3131735-3,Qty 1;5136-01-046-8862,Tap, Thread Cutting,A3131738-3,Qty 1; 5136-00-825-7136,Tap, Thread Cutting,A3131738-2,Qty 1; 5136-01-038-2908,Tap, Thread Cutting,A3131738-1,Qty 1;5136-00-825-7130,Tap,Thread Cutting,A3131738-5,Qty 1;5136-00-825-7108,Tap, Thread Cutting,A3131738-6,Qty 1;5120-01-112-0628,Inserter, Screw Thread,A3131735-1,Qty 1;5120-00-816-5703,Inserter, Screw Thread,A3131735-2,Qty 1;5120-00-237-4669,Inserter, Screw Thread,A3131735-4,Qty 1;5120-00-797-2404,Inserter, Screw Thread,A3131735-5,Qty 1;5120-00-797-2405,Insert, Screw Thread,A3131735-6,Qty 1;5120-00-410-9156,Tang Breakoff Tool,A3131737-1,Qty 1;5120-00-793-1073,Tang Breakoff Tool,A3131737-2,Qty 1;5120-00-793-1074,Tang Breakoff Tool,A3131737-3,Qty 1;5120-00-776-9519,Tang Breakoff Tool,A3131737-4,Qty 1;5120-00-793-1076,Tang Breakoff Tool,A3131737-5,Qty 1;5120-00-116-9596,Tang Breakoff Tool,A3131737-6,Qty 1;A3131718, NO NSN,Gage, Depth,U.S.STD,A3131718,Qty 1;A3131719, NO NSN,Socket, Wrench,A3131719,Qty 1;A3131720, NO NSN Socket, Wrench A3131720,Qty1;5120-01-075-2597,Wrench, Torque,A3131740-1,Qty 1;5340-00-514-2321 Insert, Screw Thread,MS124737,Qty 3;5340-00-631-7894,Insert, Screw Thread,MS21209C0415,Qty 38;5340-00-855-7892,Insert, Screw Thread,MS21209C0210,Qty 6;5340-00-815-4930,Insert, Screw Thread,MS21209C0615,Qty 53;5340-00-631-7891,Insert, Screw Thread,MS21209C0810,Qty 19;5340-00-815-4929,Insert, Screw Thread,MS21209C0815,Qty 12;5340-00-684-9501,Insert, Screw Thread,MS21209F1-10,Qty 1;5340-00-631-7897,Insert, Screw Thread,MS21209C0410,Qty 55;5140-00-315-2747,Tool Box, Portable,TYPE1CL2SIZE16,Qty 1. Drawing are available upon request at the following address and facsimile number: Commander U. S. Army, CECOM Acquisition Center, Attn.: AMSEL-ACCA-C-AP(BAT), Ft. Monmouth, NJ 07703-5008 or by facsimile to (732)532-1600. Offerors are alerted to drawings with source controlled items. MILSTD -- substitute items are permitted as long as the meet the form fit and function of MILSTD. Some of the tools required for this effort have suggested vendors Offerors are alerted that only brand name or equals will be accepted for these items. Note: The Offeror is to furnish two (2) sets of descriptive literature with their proposal submission. The supporting literature will be in sufficient detail to enable the Government to determine that the equipment proposed is in full compliance with the technical requirements stated in the purchase description. WARRANTY: Standard Commerical Warranty is required. Offerors shall provide copies of warranties with proposal to include information of the length of warranty, effective dates, specific terms and conditions and warranty service provider with company name and contact numbers (telephone, fax, etc.). MARKING/BARCODING: shall be in accordance with the guidance provided in drawings. PACKAGING AND PACKING, shall be in accordance with Best Commercial Practice. This is a COMBINED SYNOPSIS/SOLICITATION for commercial item prepared in accordance with the format in FAR 12.6and 13.601 as supplemented with the additional information included in this notice. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION: proposals are being requested and A WRITTEN SOLICITATION WILL NOT BE ISSUED. The request for proposal (RFP) number assigned to this acquisition DAAB07-97-R-C374. Solicitation requirements and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 90-45, 46. Offerors are requested to provide written quotes for Contract Line Item (CLIN) 0001AA. This acquisition is a 100% small business set-aside. Award will be made on to the lowest price, technically acceptable proposal. Successful offeror will be asked to complete Representations and Certifications, that would ordinarily be include in a solicitation Offeror are advised of the applicability of the following FAR clauses and provisions: 52-212-1, Instruction to Offers -- Commercial; 52.212-3, Offeror Representations and Certifications -- Commercial Items (offeror shall include a Completed copy of this provision with the written quote);52.212-4, Contract terms and conditions; and 52.212-5, Contract terms and conditions required to implement Statues or Executive Orders -- Commercial Items. Written proposals are due no later than 1:00 PM E. S. T., 15 September 1997. The point of contact isGrace A. Battle, telephone number (732)427-1654. Proposal may be returned by facsimile to (732)532-1600 or by mail to the following address: Commander, U. S. Army CECOM Acquisition Center, Attn.: AMSEL-ACCA-C-AP(BAT), Ft. Monmouth, NJ 07703-5008. (0230)

Loren Data Corp. http://www.ld.com (SYN# 0326 19970820\99-0005.SOL)