|
COMMERCE BUSINESS DAILY ISSUE OF AUGUST 6,1997 PSA#1903ANNISTON ARMY DEPOT, DIRECTORATE OF CONTRACTING, 7 FRANKFORD AVE,
ANNISTON AL 36201-4199 34 -- HORIZONTAL MACHINING CENTER SOL DAAC01-97-R-0017 DUE 091797 POC
Contract Specialist Valerie D. Jones (205) 235-7748 Contracting
Officer Cathy C. Higginbotham (205) 235-7323 (Site Code DAAC01) Furnish
and Install a new horizontal machining center (not a prototype) and one
of the manufacturer's current production models. Its design shall
include features and components necessary for maintaining alignment and
accomplishing drilling, milling, boring and tapping performance
required herein. The machine shall be of a fixed base type with Y-axis
vertical movements on the column ways. Longitudinal movement x-axis
shall be pro vided by movement of the column on foundation mounted
ways. Tools, tool holders, and adapters shall be inserted and removed
from the spindle by an automatic tool changer with storage magazine.
Tool changes, spindle opera tions, linear and rotary axis motion and
other operations as specified herein, shall be directed by a computer
numerical control (CNC) system. The machine and its numerical control
systems shall constitute a completely functional system with built-in
operations programmed by floppy disk, DNC (distributed numerical
control) and/or other devices. The machine maycontain reclaimed
materials to the maximum extent possible provided such materials will
not jeopardize the intended use, performance, or design life of the
machine. Reclaimed materials shall have been collected or recovered
from solid waste and reprocessed to become a source of raw materials,
as opposed to virgin raw materials. None of the above shall be
interpreted to mean that the use of used, rebuilt or remanufactured
products are allowed under this specification. This requirement is
subject to the availability of funds. 1 each. System is to be installed
at Anniston Army Depot, Anni ston, AL 36201-4199 within 365 days after
contract award. All responsible sources may submit an offer which
shall be considered. Requests for the solicitation must be in writing.
Faxes are acceptable at (205) 235-6353. No telephonic request will be
acknowledged. (0216) Loren Data Corp. http://www.ld.com (SYN# 0207 19970806\34-0001.SOL)
34 - Metalworking Machinery Index Page
|
|