|
COMMERCE BUSINESS DAILY ISSUE OF JULY 21,1997 PSA#1891International Boundary & Water Commission, United States Section, The
Commons, Building C, Suite 310, 4171 N Mesa St., El Paso TX 79902-1441 56 -- ROCK RIP RAP, GRAVEL BEDDING MATERIAL, AND BOULDERS SOL IFB No.
97-04 DUE 090497 POC Mary Nichols, 915 534-6682, ext. 235 WEB: usibwc,
acq div, http://www,ibwc.state.gov. E-MAIL: usibwc, acq div,
ibwc09@whc.net. The International Boundary and Water Commission, United
States and Mexico, United States Section, has a requirement for a
firm-fixed price contract for rock rip rap (48,525 tons), gravel
bedding material (11,345 tons), and 300 boulders having a minimum size
of 4ft x 4ft x 4ft. The Contractor shall furnish, haul, and stockpile
rip rap, bedding material, and boulders at approximately six (6)
designated sites along the Rio Grande Canalization Project from Arrey,
Sierra and Dona Ana Counties, NM to El Paso, El Paso County, TX. All
stone material for boulders, rip rap, and bedding shall be sound, hard,
durable, angular in shape, free from lamination, weak cleavages, and
undesirable weathering, and of such character that it will not
disintegrate from the action of air, water, or the conditions to be met
in handling and placing. The stone shall weight not less than 155
pounds per cubmic foot. All stone material shall be clean and free from
earth, clay, refuse, and adherent coating. All stone material shall
bequarried and no arroyo or round boulders will be acceptable. Boulder
size shall meet the following requirements: 4-5ft height; 4-5ft width;
and 4-10ft length. Rip rap material shall be well graded within the
following limits -- Percent lighter by weight (Sand and stone (SSD)
dust shall be less than 5%, by weight, of total rip rap
material)/Limits of Stone (Weight in lbs): 100/63-159; 50/32-47; and
15/10-23. Neither the breadth nor the thickness of any pience of rip
rap shall be less than 1/3 of its length. All bedding material shall be
composed of tough, durable particles; shall be reasonably free from
thin, flat elongated pieces; and shall contain no organic matter.
Bedding material shall consist of sand, gravel or crushed stone, well
graded between the following limits -- U.S. Standard Sieve Size/Percent
by Weight Passing: 2in/100; 1-1/2in/50-85; 3/4in/20-70; No. 4/5-45; No.
16/0-30; No. 100/0-15; No. 200/0-10. Gradation of material shall be
determined in accordance with ASTM C136-93. All points on individual
grading curves obtained from representative samples of stone shall lie
between the boundray limits as defined by smooth curves drawn through
the tabulated grading limits plotted on mechanical analysis diagram.
The individual grading curves within these limits shall not exhibit
abrupt changes in slope denoting skip grading, scalping of certain
sizes or other irregularities which would be detrimental to the proper
functioning of the bedding material. Material shall be made to the
required grading and temporarily stockpiled at the source for
inspection testing and approval prior to shipment to the final
stockpile sites of the project.Tentative dates for issuing and opening
IFB 97-04 are August 5 and September 4, 1997, respectively. The
performance period for this procurement is 160 calendar days. The
delivery of the stone materials for each site shall commence within 10
days after notification by the Contracting Officer. All requests for
bid documents must be made in writing; no telephone or facsimile
requests will be accepted. Requests for bid documents must be sent to
the: United States Section, International Boundary and Water
Commission, 4171 North Mesa Street, Building C, Suite 310, ATTN: Mary
Nichols (IFB 97-04), El Paso, TX 79902-1441. Requests must include
business name, point of contact, address, telephone number (include
area code), and IFB number. The applicable SIC code for this
procurement is 1499. The applicable small business size standard is 500
employees. All responsible sources may submit a bid. (0198) Loren Data Corp. http://www.ld.com (SYN# 0288 19970721\56-0001.SOL)
56 - Construction and Building Materials Index Page
|
|