|
COMMERCE BUSINESS DAILY ISSUE OF OCTOBER 3,1996 PSA#1693Directorate Of Contracting, Oo-Alc 6050 Gum Lane/Bldg 1215, Hill Air
Force Base, Ut 84056-5825 16 -- COLLAR,ROTATION,LAN SOL F42630-96-Q-2201 DUE 111396 POC For
copy, PKX-2/Pamala Chaffee/(FAX)801-777-7522, For additional
information contact Landing Gear/Photo/Likl/(801)777-6501 Item 0001 NSN
1620-00-488-4553 P/N: 4G13565-101B, Transfers rotation power from the
lock ring assembly to the spline tube. The spline tube in turn rotates
the piston to allow the strut to rotate from landing position (0) to
retract position (90) and return again for landing. Dimensions: OD.
10.7385'' (over pins) major 10.7.48'' minor 1D6.76'' ht 3.5'' splined
internally & externally. Material: 300M steel. 23ea. Applicable to:
C-5. Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 31 Dec 99 23
ea Item 0002 data, 1 lot Qualification requirements: Sources must be
qualified prior to being considered for award. The solicitation will
contain instructions for obtaining further information on this
requirement. The requirements of FAR 9.202(A) have been completed and
copies of the qualification requirements and standards may be obtained
as described in the solicitation. These qualification requirements
apply to line item(s) all The approximate issue/response date will be
21 Oct 96. The anticipated award date will be 13 Nov 96. Written
procedure will be used for this solicitation. To: Eagle Tool & Machine
Co, Springfield Oh 45506-0179. To: All Tools Inc, Cleveland Oh
44144-1105. No telephone requests. Only written or faxed requests
received directly from the requestor are acceptable. All responsible
sources solicited may submit a bid, proposal, or quotation which shall
be considered. Award will be made only if the offeror, the
product/service, or the manufacturer meets qualification requirements
at the time of award in accordance with FAR clause 52.209-1. The
solicitation identifies the office where additional information can be
obtained concerning qualification requirements is cited in each
individual solicitation. It is suggested that small business firms or
others interested in subcontracting opportunities in connection with
the described procurement make contact with the firm(s) listed. Request
for copies of solicitations must reference the entire solicitation
number, including purchasing office identification number. To expedite
your request, limit the number of individual solicitation numbers
requested per letter to not more than 10. Don't request information on
this requirement until after the issue date. This proposed procurement
is under a 100 percent small business set aside, the size standard for
which is 1,000 employees. An Ombudsman has been appointed to hear
concerns from offerors or potential offerors during the proposal
development phase of this acquisition. The purpose of the Ombudsman is
not to diminish the authority of the program director or contracting
officer, but to communicate contractor, concerns, issues,
disagreements, and recommendations to the appropriate government
personnel. When requested, the Ombudsman will maintain strict
confidentiality as to the source of the concern. The Ombudsman does not
participate in the evaluation of proposals or in the source selection
process. Interested parties are invited to call Jack S. Jones if your
concerns are not satisfied by the contracting officer (801)777-6991.
This part required engineering source approval by the design control
activity in order to maintain the quality of the part. Existing unique
design capability, engineering skills, and manufacturing knowledge by
the qualified source(s) require acquisition of the part from the
approved source(s). The approved source(s) retain data rights,
manufacturing knowledge, or technical data that are not economically
available to the Government, and the data or knowledge is essential to
maintaining the quality of the part. An alternate source must qualify
in accordance with the design control activity's procedures, as
approved by the cognizant Government engineering activity. The
qualification procedures must be approved by the Government engineering
activity having jurisdiction over the part in the intended application.
See Note (s) 1, 26. (0275) Loren Data Corp. http://www.ld.com (SYN# 0152 19961002\16-0002.SOL)
16 - Aircraft Components and Accessories Index Page
|
|