Oc-Alc/Dir Of Contracting/Propulsion, 3001 Staff Dr Ste 1ag81, Tinker Air Force Base Ok 73145-3032

28 -- BLADE,STG 5 SOL F34601-97-Q-49317 DUE 103196 POC For copy, OC-ALC/PKXDA TINKER AFB OK 73145-3015, For additional information contact John Groth/Lpdpb/(405)739-4427 Item 0001 NSN 2840-01-147-1864JF P/N: P105P02, The stage 5 blade is a piece of flat material with an air foil and a dove tail at one end. The function of the blade is to direct air flow to the 6th stage vanes and compress air to next stage. The dimensions are approximately 1.648 inches long by 0.787 inches wide. The material consists of a nickle alloy. 285EA. Applicable to: B1b/F16-C/D Aircraft. Destn: Tinker Air Force Base Ok 73145-3032. Delivery: 29 May 98 285 ea Item 0002 NSN 2840-01-147-1864JF Blade,Stg 5 P/N: P105P02, The stage 5 blade is a piece of flat material with an air foil and a dove tail at one end. The function of the blade is to direct air flow to the 6th stage vanes and compress air to next stage. The dimensions are approximately 1.648 inches long by 0.787 inches wide. The material consists of a nickle alloy. 457EA. Applicable to: B1b/F16-C/D Aircraft. Destn: Tinker Air Force Base Ok 73145-3032. Delivery: 29 May 98 457 ea Item 0003 NSN 2840-01-147-1864JF Blade,Stg 5 P/N: P105P02, The stage 5 blade is a piece of flat material with an air foil and a dove tail at one end. The function of the blade is to direct air flow to the 6th stage vanes and compress air to next stage. The dimensions are approximately 1.648 inches long by 0.787 inches wide. The material consists of a nickle alloy. 171EA. Applicable to: B1b/F16-C/D Aircraft. Destn: Tinker Air Force Base Ok 73145-3032. Delivery: 29 May 98 171 ea Item 0004 NSN 2840-01-147-1864JF Blade,Stg 5 P/N: P105P02, The stage 5 blade is a piece of flat material with an air foil and a dove tail at one end. The function of the blade is to direct air flow to the 6th stage vanes and compress air to next stage. The dimensions are approximately 1.648 inches long by 0.787 inches wide. The material consists of a nickle alloy. 38EA. Applicable to: B1b/F16-C/D Aircraft. Destn: Tinker Air Force Base Ok 73145-3032. Delivery: 29 May 98 38 ea Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The qualification requirements for this item were established prior to 19 Oct 1984 and the requirements of FAR 9.202(A) do not apply. These qualification requirements apply to line item(s) 0001 The approximate issue/response date will be 01 Oct 96. The anticipated award date will be 27 Nov 96. Written procedure will be used for this solicitation. To: General Electric Co Aircraft Engine, Cincinnati Oh 45215-6301. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty five-days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements as cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation requests can be submitted to OC-ALC/PKXDA, Tinker AFB OK 73145-3015, FAX NUMBER (405)739-5411. See Note (s) Note: 26. (0255)

Loren Data Corp. http://www.ld.com (SYN# 0204 19960912\28-0001.SOL)