|
COMMERCE BUSINESS DAILY ISSUE OF FEBRUARY 13,1996 PSA#1530Directorate Of Contracting, Oo-Alc 6050 Gum Lane/Bldg 1215, Hill Air
Force Base, Ut 84056-5825 13 -- SMCD CORD ASSY SOL F42630-96-Q-60560 DUE 032096 POC For copy,
PKX-2/Pamala Chaffee/(FAX)801-777-7522, For additional information
contact Genee Maero/Likm/(801)775-2093 Item 0001 NSN 1377-01-016-3213ES
P/N: 50595-115A, P/N 812503-115A Acft eject sys (life support)
ballistic dev. Predominant matl is stainless steel with an expl charge
of 0.0006 lb, length 6.71 in, dia 0.191 in. 7ea. Applicable to: F-15.
Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 31 Mar 97 7 ea
Item 0002 NSN 1377-01-016-3214ES Cord Assembly,Deton P/N: 50595-117A,
P/N 812503-117A Acft ejection sys (life support) ballistic device.
Stainless steel tube around Explosive mix. Length 2.92 in. Diameter
0.191 in. 77ea. Applicable to: F-15. Destn: Hill Air Force Base, Ut
84056-5825. Delivery: 31 Mar 97 77 ea Item 0003 NSN 1377-01-017-4533ES
Cord Assembly,Deton P/N: 50595-125A, P/N 812503-125A Acft ejection sys
(life support) ballistic device. Stainless steel tube around explosive
mix. Length 6.84 in. Diameter 0.191 in. 155ea. Applicable to: F-15.
Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 31 Mar 97 155 ea
Item 0004 NSN 1377-01-016-3215ES Cord Assy, Deton P/N: 50595-127A, P/N
812503-127A Acft ejection sys (life support) ballistic device.
Stainless steel tube around explosive mix. Length 4.82 in diam 0.191
in. 153ea. Applicable to: F-15. Destn: Hill Air Force Base, Ut
84056-5825. Delivery: 31 Mar 97 153 ea Item 0005 NSN 1377-01-017-4528ES
Smdc Cord Assy P/N: 812503-129A, P/N 50595-129A Acft ejection sys (life
support) ballistic device. Stainless steel tube around explosive mix.
Length 7.37 in diam 0.191 in. 47ea. Applicable to: F-15. Destn: Hill
Air Force Base, Ut 84056-5825. Delivery: 31 Mar 97 47 ea Item 0006 NSN
1377-01-015-9057ES Smdc Cord Assy P/N: 812503-143A, P/N 50595-143A
Acft ejection sys (life support) ballistic device. Stainless steel tube
around explosive mix. Length 5.63 in diam 0.191 in. 5ea. Applicable to:
F-15. Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 31 Mar 97 5
ea Qualification requirements: Sources must be qualified prior to
being considered for award. The solicitation will contain instructions
for obtaining further information on this requirement. The
requirements of FAR 9.202(A) have been completed and copies of the
qualification requirements and standards may be obtained as described
in the solicitation. These qualification requirements apply to line
item(s) all There are 1 additional items(s) in FSC(s) 1377 The
approximate issue/response date will be 29 Feb 96. The anticipated
award date will be 20 Mar 96. Written procedure will be used for this
solicitation. To: Teledyne Mccormick Selph, Hollister Ca 95024 0006.
To: Oea Aerospace Inc, Fairfield Ca 94533-0659. No telephone requests.
Only written or faxed requests received directly from the requestor
are acceptable. All responsible sources solicited may submit a bid,
proposal, or quotation which shall be considered. Award will be made
only if the offeror, the product/service, or the manufacturer meets
qualification requirements at the time of award in accordance with FAR
clause 52.209-1. The solicitation identifies the office where
additional information can be obtained concerning qualification
requirements is cited in each individual solicitation. It is suggested
that small business firms or others interested in subcontracting
opportunities in connection with the described procurement make contact
with the firm(s) listed. Requests for copies of solicitations must
reference the entire solicitation number, including purchasing office
identification number. To expedite your request, limit the number of
individual solicitation numbers requested per letter to not more than
10. Don't request information on this requirement until after the issue
date. An Ombudsman has been appointed to hear concerns from offerors or
potential offerors during the proposal development phase of this
acquisition. The purpose of the Ombudsman is not to diminish the
authority of the program director or contracting officer, but to
communicate contractor, concerns, issues, disagreements, and
recommendations to the appropriate government personnel. When
requested, the Ombudsman will maintain strict confidentiality as to the
source of the concern. The Ombudsman does not participate in the
evaluation of proposals or in the source selection process. Interested
parties are invited to call Jack S. Jones if your concerns are not
satisfied by the contracting officer (801)777-6991. (0040) Loren Data Corp. http://www.ld.com (SYN# 0127 19960212\13-0002.SOL)
13 - Ammunition and Explosives Index Page
|
|