Sa-Alc/Lfkb, 1015 Billy Mitchell Blvd, Kelly Afb, Texas 78241-5601

15 -- HORN,HORIZONTAL STAB. SOL F41608-96-R-0152 DUE 031396 POC For copy, Fax request to LAKFB at 210-925-2038, For additional information contact Pena, G./lfka/210-925-6861 Item 0001 NSN 1560-01-106-9754XJ P/N: 2-32103-7, P/N 2-32103-7 REV G Size: 3'' X 10'' Predominate Material: Steel Alloy Function: Attaches to horizontal stabilzer and provides attach point for stab actuator Data: IAW DD Form 1423 applies Other Information: First Article for both P/N is 240 DARO, production units are 300 after first article approval. 10EA. Applicable to: F5. Destn: SA-ALC/FB2059 AND FMS. Item 0002 NSN 1560-01-106-9755XJ Thorn Horizontal Stabilizer P/N: 2-32102-7, P/N 2-32102-7 REV F Size: 3'' X 10'' Predominate Material: Steel Alloy Function: Attached to horizontal stabilizer and provides attach point for stab actuator. Data: IAW DD Form 1423 applies. Other Information: First Article for both P/N: is 240 DARO Prod units are 300 days after first article approval. 16EA. Applicable to: F5. Destn: SA-ALC/FB2059 AND FMS. Item 0003 NSN 1560-01-106-9755XJ Thorn Horizontal Stabilizer P/N: 2-32102-7, P/N 2-32102-7 REV F Size: 3'' X 10'' Predominate Material: Steel Alloy Function: Attached to horizontal stabilizer and provides attach point for stab actuator. Data: IAW DD Form 1423 applies. Other Information: First Article for both P/N: is 240 DARO Prod units are 300 days after first article approval. 6EA. Applicable to: F5. Destn: SA-ALC/FB2059 AND FMS. Item 0004 NSN 1560-01-106-9754XJ Horn,Horizontal Stab. P/N: 2-32103-7, P/N 2-32103-7 REV G Size: 3'' X 10'' Predominate Material: Steel Alloy Function: Attaches to horizontal stabilzer and provides attach point for stab actuator Data: IAW DD Form 1423 applies Other Information: First Article for both P/N is 240 DARO, production units are 300 after first article approval. 16EA. Applicable to: F5. Destn: SA-ALC/FB2059 AND FMS. Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The qualification requirements for this item were established prior to 19 Oct 1984 and the requirements of FAR 9.202(A) do not apply. These qualification requirements apply to line item(s) 0001 Government furnished drawings and specifications are available. The approximate issue/response date will be 13 Feb 96. The anticipated award date will be 01 May 96. Written procedure will be used for this solicitation. To: L And S Machine Co Inc, Wichita Ks 67277-2264. To: Bristol Aerospace Ltd, Winnipeg Ma Ca R3cs4. To: Northrop Grumman Corporation, El Segundo Ca 90245-2804. First article test required. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. See Note (s) A D. (0032)

Loren Data Corp. http://www.ld.com (SYN# 0122 19960202\15-0001.SOL)