|
COMMERCE BUSINESS DAILY ISSUE OF AUGUST 7,1995 PSA#1404Contracts Competency Division, Building 588, M/S 32, NAVAL AIR WARFARE
CENTER AIRCRAFT DIVISION, Patuxent River, MD 20670-5304, ATTN: Mike
Rock, 2622MR 59 -- DYNAMIC TEMPLATE SYSTEM SOL N00421-95-R-5293 DUE 083195 POC Mike
Rock, Contract Specialist, (301) 342-1828, ext 114, Linda Suggs,
Contracting Officer, (301) 342-1828, ext. 108. The Sensor Systems
Division of the Naval Air Warfare Center Aircraft Division (NAWCAD) has
a requirement for a Dynamic Template System. This system shall provide
a controllable template that modulates various electro-optical sources
and provides variable optical target sizes to the sensor under test.
DCS Corporation is the sole manufacturer of the Dynamic Template System
with IRDTS-1.0-SCR Dynamic Template Source and Interface Unit;
IEEE-1.0-IF IEEE-488 Computer Interface and IFKIT-1.0-EOI Mounting
Hardware Installation. This system provides a thermal source with a
controller, interface software, and a dynamic iris closing target
simulator. Technical requirements call for a temperature control
between +5 deg C and +100 deg C, and point source iris capability of
12mm to 50mm openings. Control software shall be capable of varying the
iris size and thermal source rate of change to simulate IR target
characteristics. IR target charateristics shall be applicable for
testing IR Search and Track (IRST) and Forward Looking IR (FLIR)
systems. The system shall be capable of being integrated with an
existing NAWCAD 486 computer to provide computer control of the
blackbody source and iris. Knowledge on specific integration
requirements associated with the NAWCAD EOI Model HR630 collimator
system is required. This system is an off-axis reflecting parabolic
mirror which projects the iris controlled thermal target to the sensor
under test. In accordance with FAR 6.302-1 only one responsible source
and no other Supplies or Services will satisfy agency requirements,
this requirement will be negotiatied on a sole source basis with DCS
Corporation. All responsible sources may submit a proposal which shall
be considered by the agency. Capability statements may be faxed to Mr.
Mike Rock at (301) 342-1864. See Numbered Note(s): 22. (0215) Loren Data Corp. http://www.ld.com (SYN# 0274 19950804\59-0004.SOL)
59 - Electrical and Electronic Equipment Components Index Page
|
|