|
COMMERCE BUSINESS DAILY ISSUE OF JULY 18,1995 PSA#1390AFFTC/PKAD Directorate of Contracting, 5 S. Wolfe Ave, Edwards AFB, CA
93524-1185 66 -- MEASUREMENT AND CALIBRATION SYSTEM SOL F04700-95-R-0031 DUE
083095 POC Teresa Weber, Contract Specialist, (805) 277-3900 ext 2260;
John Lemacks, Contracting Officer, (805) 277-3900 ext 2253; or fax
(805) 258-9670. The Air Force Flight Test Center has a requirement for
a measurement and calibration system. This system shall have the
capability to calibrate the following: diameter, roundness, and
parallelism of cylindrical plug gages; major, minor, and pitch diameter
of threaded plug gages; gap and parallelism of snap gage faces; total
length of end standards; linear displacement of dial indicators and
electronic measuring probes; internal and external diameters; and
internal and external threads. The system shall meet or exceed the
following specifications: minimum external capacity of 0 to 40 inches;
minimum external capacity of 1 to 30 inches. Measuring system minimum
resolution of 10 micro inches. The measuring accuracy shall have a
maximum error of +/-20 micro inches over the measurement range. The
measuring force shall have an internal and external variable force of
5 to 50 oz. The system shall have a digital numeric indicating device
with a minimum resolution of .00001 inches; a preset-reset mechanism to
set an arbitrary reference anywhere within the measurement range;
millimeter to inch conversion; a univeral measuring table adjustable
through a minimum of three axis; and a mounting device for dial
indicators end electronic measuring probes. The system must conform to
ANSI Z540-1. SIC: 3829. Written requests from all responsible
contractors will be honored. Telephone requests to be placed on the
mailing list will not be honored. (0195) Loren Data Corp. http://www.ld.com (SYN# 0540 19950717\66-0005.SOL)
66 - Instruments and Laboratory Equipment Index Page
|
|