|
COMMERCE BUSINESS DAILY ISSUE OF APRIL 4,1995 PSA#1317Defense Mapping Agency, AQSO, 3200 South Second Street, Mail Stop L-13,
St. Louis, MO 63118-3399 53 -- HARDWARE POTENTIAL SOURCES SOUGHT DUE 042095 POC Brenda
Walsh/Contract Specialist or James E. Martin/Contracting Officer at
(314)263-8028 53 - The Defense Mapping Agency (DMA), is seeking
potential sources for a Just In Time (JIT) contract for electrical,
plumbing, lumber, air conditioning filters, and hardware items used in
the facility maintenance of their St. Louis, Missouri complex. DMA
planners will order all items required for a job as a job order and the
contractor will deliver all job order items just in time, within 72
hours of ordering. Each job shall be packaged, marked and shipped
together. The ordering process should be via electronic data interface
with the Contractor utilizing the Government credit card as the
payment method. DMA intends to negotiate a discount percentage off a
published catalog price. The estimated minimums/actuals are: filters -
$5,000.00 minimum/$16,000.00 year. Typical filters vary in thickness
from 2 to 12 inches with efficiencies of 15, 60, and 95 percent;
plumbing - $2,000.00minimum/$5,000.00 year. Typical plumbing items
include 1/2 to 2 inch copper and black iron piping, gate valves sweat
and threaded with bronze stems up to 2 inches, and miscellaneous
fittings to 2 inches; electrical - $5,000.00 minimum/$20,000.00 year.
Typical electrical parts include No's 4 - 12 THNN wire, thin wall
conduit 1/2 to 2 inches, sealtite flexible conduit to 1 inch, EMT
ferrous sealtite boxes, and 20 and 30 ampere isolated ground
receptacles; hardware - $2,000.00 minimum/$1,200.00 for 6 months.
Typical hardware items include base cove, bolts, anchors, threaded rod,
machine screws, and sheet metal screws; and lumber - $1,000.00
minimum/$1,600.00 for 4 months. Typical lumber types are 16 foot length
of 1x12 grade C or better Western sugar pine, 16 foot lengthsof 2x4
grade 1 White pine, DONN brand commercial ceiling grid, 16 foot lengths
of metal studs, plaster board and plywood. The total estimated
minimum/actual is $15,000.00/$45,500.00. Potential sources should
submit the following information for evaluation of their just in time
capability: statement of intent describing the company's JIT hardware
expertise, electronic interface capabilities, finicial resources, JIT
ordering and warehousing capabilities and motivation for participation
in this program. The statement of interest must be dated within 15
business days from the date of this notice. Asolicitation document is
not available at this time. (0090) Loren Data Corp. http://www.ld.com (SYN# 0218 19950403\53-0006.SOL)
53 - Hardware and Abrasives Index Page
|
|