|
COMMERCE BUSINESS DAILY ISSUE OF FEBRUARY 15,1995 PSA#1284Department of the Army, Baltimore District, Corps of Engineers, P.O.
Box 1715, Room 7000 Baltimore, MD 21203-1715 C -- INDEFINITE DELIVERY-TYPE (MULTIDISCIPLINE W/ENVIRONMENTAL
SERVICES) CONTRACT FOR THE FORT MYER MILITARY COMMUNITY, ARLINGTON VA
SOL DACA31-95-R-0027 POC Ms. Mary A. Riche (410) 962-4880 Work may
consist of preparation of reports, studies, design criteria, design and
other general architect-engineering services for alteration,
renovation, maintenance and repair, and new construction projects. The
firm shall have the capability to provide multidiscipline engineering
services which shall include environmental, architectural, mechanical,
electrical, civil, structural, plumbing, sanitary, site/sanitary, and
geotechnical engineering; interior design, landscape design; fire
protection; cost estimating; topographic surveying; drafting
production; asbestos and lead paint survey and testing; abatement
design; and remediation. The firm shall have a minimum of one certified
industrial hygienist. The firm shall be experienced with the COE A-E
Instruction Design Criteria; CADD Standard Manual(EM 1110-1-180); AIA
CADD layer Guidelines; COE Technical Manuals (TM), Engineer Technical
Letters (ETL) and Engineer Regulations (ER); COE Guide specifications
for Military Construction; seismic design; CPM; regulatory requirements
(NCPC, CFA, and SHPO, etc);historical restoration; National
Environmental Policy Act (NEPA) experience; ISO concentration and
mapping experience; culturalnatural resources capabilities. RPMA;
metric capability; economic analyses; utilization of Econ-Pak;
stormwater management; sedimentation and erosion control; National
Pollutant Discharge Elimination System (NPDES) permitting (including
obtaining permits,etc.); perform sampling, lab testing and remediation
of contaminates/waste; geostatistical capability and experience, and
preparation of DD Form 1391 and Project Development Brochures.(PDB).
Firm should have experience with the COE Micro-Computer Aided Cost
Estimating System (M-CACES). Firm must be capable of responding to
multiple work orders concurrently. The products are not required to be
performed using a specific CADD system. However,the firm will be
required to provide any digitizing and/or translation services
necessary to deliver the final design productsin AUTOCADD Release 12 on
3-1/2 inch high density diskettes formatted for 1.44 MB. The firm will
also need to be able to convert CADD to Intergraph Micro Station.
Contract will be for a 12-month period and will contain an option to
extend for 12 additional months. Cumulative total of this contract
shall not exceed $750,000.00. Individual delivery orders for each
contract shall not exceed $150,000.00. Subcontracting Plan
Requirements: If the selected firm is a large business concern, a
subcontracting plan with the final fee proposal will be required,
consistent with Section 806(b) of PL 100-180, PL 95-507, and 99-661. A
minimum of25% of the total planned subcontracting dollars shall be
placed with small business concerns. At least 8 percent of total
planned subcontracting dollars shall be placed with small disadvantaged
businesses, including Historically Black Colleges and Universities or
Minority Institutions, and at least 5% with Women-Owned Businesses
(WOB). Firms desiring consideration should submit appropriate data as
described in Numbered Note 24 including SF 255. SF 255 must be
submitted for prime and joint ventures. SF 254 must be submitted for
prime, joint ventures, and consultants. The SF255 and SF 254 shall
clearly indicate the staffing of the office(s)indicated to do the work.
Responses to this announcement received within 30 days from the date of
this issue will be considered for selection. Street address: City
Crescent Building, ATTN: Mary A.Riche, Room 7000, CENAB-CT-A, 10 South
Howard Street, Baltimore, Maryland 21201. This is not a request for
proposal. (0044) Loren Data Corp. http://www.ld.com (SYN# 0024 19950214\C-0006.SOL)
C - Architect and Engineering Services - Construction Index Page
|
|