|
COMMERCE BUSINESS DAILY ISSUE OF FEBRUARY 14,1995 PSA#1283PL/PKLA/Lasers and Imaging Division 2251 Maxwell Ave. SE Kirtland AFB
NM 87117-5772 A -- DSA - RESEARCH AND DEVELOPMENT SOURCES SOUGHT POC Ms Kim Reeder,
Contract Specialist, 505/846-0077 Mr Mike Vigil, Project Officer,
505/846-6202. The Air Force Phillips Laboratory Lasers and Imaging
Directorate, Kirtland AFB, New Mexico is seeking potential sources for
recoating two large flat folding mirrors to be used in an existing
coelostat pointing system. The mirrors are 57 inches in diameter by 8
inches thick made from Cervit glass and weigh approximately 1830 pounds
each. It can be assumed that the existing mirrors will not need
repolishing and the glass can be chemically stripped by the re-coater.
The following coating specifications apply to the central 54 inches:
Reflectivity at 527 nm shall be greater than 0.99, Reflectivity at
1064nm and 1315nm shall be greater than 0.98, Reflectivity across the
band from 450nm to 1315 nm shall be greater than 0.95. The differential
phase shift between the s and p polarization at 527nm and a 45 degree
angle of incidence shall be less than 10 degrees. The damage threshold
shall be greater than 5j/cm2 for a 10 Hz, 0.5 microsecond pulse train
at 527nm with a duration of 180 seconds. The coating shall comply with
MIL Standard 13508C for temperature influence, hardness, adherence, and
humidity resistance. The maximum acceptable mirror deformation due to
coating stress is 0.1 waves surface to valley at 633nm. The contractor
shall provide materials and accomplish all fabrication needed for
these tasks. The contractor shall provide two, 2 inch diameter samples
of the selected coating 45 days before final coating for evaluation at
the Phillips Laboratory. The subject mirrors will be available for
coating on or about 1 June 1995 and will be shipped either by the
contractor or by the government directly from their present location in
upstate New York or from the Phillips Laboratory at Kirtland AFB, NM to
the contractor's facility. The contractor shall be responsible for
packaging and shipping the finished mirrors to the Air Force Phillips
Laboratory on Kirtland AFB, NM. Foreign Firms are advised there may be
restrictions to participating as the prime contractor. Interested
contractors must indicate whether they qualify as a small business
under Standard Industrial Code (SIC) 3827 (Optical Instruments), with
a small business size standard of 500 employees. Also, firms responding
are to reference this solicitation number, F29601-95-R-0026, and
indicate whether they are, or are not, a small business, 8(a) firm, a
socially and economically disadvantaged business, a woman-owned
business, an historically Black college or university, or a minority
institution. Within 15 working days from publication, only interested
small businesses need include a statement of capabilities to assist the
Air Force in making a set-aside decision. Based on responses to this
announcement, the Air Force reserves the right to set-aside this
requirement for 8(a), small disadvantaged business, small business, or
historically Black colleges and universities or minority institutions.
Information submitted in the statements of capability should be
pertinent and specific in the technical area under consideration, on
each of the following qualifications: (1) Experience: An outline of
previous projects, specific work previously performed or being
performed, and any in- house research and development effort, (2)
Coating Design: Respondent shall provide a computer predicted or
similar previous design performance curve across the 450nm to 1315nm
band. (3) Facilities: Availability and description of facilities
required to perform coating of large optics. Include any other specific
and pertinent information as pertains to this particular area of
procurement that would enhance our consideration and evaluation of the
information. This statement of capability response will be limited to
a maximum of 20 pages, excluding resumes. An original Statement of
Capability, and two (2) copies should be sent to: Phillips Laboratory,
Directorate of Contracting/PKLA, Attn: Kim M. Reeder, 2251 Maxwell
Ave. SE, Kirtland AFB, NM 87117-5772. Submit only unclassified
information for consideration and evaluation. Information concerning
this procurement is also available on the STARS electronic bulletin
board maintained by the Directorate of Contracting at AC505-846-5854
(no parity, 8 databits, 1 stopbit). An Ombudsman has been appointed to
hear concerns from offerers or potential offerors during the proposal
development phase of this acquisition. The purpose of the Ombudsman is
to receive and communicate serious concerns from potential offerors
when an offeror prefers not to use established channels to express
concerns during the proposal development phase of the acquisition.
Potential offerors should use established channels to request
information, pose questions, and voice concerns before contacting the
Ombudsman. For serious concerns only, potential offerors are invited to
contact the Phillips Laboratory Ombudsman, Colonel Dayton L. Silver,
Phillips Laboratory Vice commander at 505/846-4962, 3550 Aberdeen Ave.
SE, Kirtland AFB, NM 87117-5776, or his alternate, Mr. Bruce Grunsten,
Chief, Phillips Laboratory Contracts Policy Division at 505/846-8273,
2251 Maxwell Avenue SE, Kirtland AFB, NM 87117-5772. For Contracting
issues, please contact Ms. Kim M Reeder at 505/846-0077. For technical
issues, please contact Capt. Laura Picon at 505/846-2050. (0041) Loren Data Corp. http://www.ld.com (SYN# 0004 19950213\A-0004.SOL)
A - Research and Development Index Page
|
|