SOLICITATION NOTICE
65 -- Quincy Dental Air Compressor
- Notice Date
- 7/30/2026 12:00:00 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 339114
— Dental Equipment and Supplies Manufacturing
- Contracting Office
- 256-NETWORK CONTRACT OFFICE 16 (36C256) RIDGELAND MS 39157 USA
- ZIP Code
- 39157
- Solicitation Number
- 36C25626Q1130
- Response Due
- 8/7/2026 12:00:00 PM
- Archive Date
- 09/06/2026
- Point of Contact
- ARLENE A. BLADE, Contracting Officedr, Phone: (318) 466-4281
- E-Mail Address
-
arlene.blade@va.gov
(arlene.blade@va.gov)
- Small Business Set-Aside
- SBA Small Business Set Aside - Total
- Description
- Solicitation 36C25626Q1130 Amendment 0001 The purpose of this amendment is to: 1. Correct the NAICS Code from 333914 to 339114. 2. Respond to vendors questions. 3. In corporate the revised Statement of Work. Response to Vendors Questions: Question1: Please confirm whether the contractor must perform installation, electrical connection, piping, rigging, start-up, testing, commissioning, training, removal, or disposal. If any field work is required, please provide the complete technical and site requirements. Answer 1: Contractor is not responsible for installation. This solicitation is only for the purchase of the air compressor. Question 2: The schedule notes that a desiccant air dryer is currently being used. Please identify its manufacturer/model, connection requirements, controls interface, and whether the new compressor must be connected to or certified as compatible with it. Answer 2: Yes there is a dryer, but we are just buying the compressor. No installation is required. Question 3: For delivery, is a mandatory requirement for delivery or may offerors propose a lead time that will be comparatively evaluated. Answer 3: The Government would like to know the lead time that will be comparatively evaluated. Question 4: Is this requirement for brand-name only or does the identified Quincy model merely establish the salient characteristics? Answer 4: The Government would prefer the Quincy QOF-15 as this is the current air compressor in use at the medical center. Question 5: Please identify the complete required configuration, including tank, dryer, filters, controls, accessories, voltage/phase, capacity, and any dental-air or medical-air compliance standards. Answer 5: The Government is only buying a piece of equipment not a full redesign. The specifications for this piece of equipment is in the solicitation. Question 6: Please confirm the required delivery date, destination, inspection/acceptance criteria. Answer 6: Within 30 days of award and then there will be a full visual inspection once the vendor delivers this piece of equipment to the warehouse. Question 7: Will the Government consider an ""or equal"" dental air compressor that meets or exceeds all stated specifications and performance requirements, or if only the Quincy QOF-15 will be accepted?� Answer 7: The Government prefers the Quincy QOF-15. We consider other equal units. Question 8: Please confirm whether the contractor s responsibility is limited to FOB-destination delivery or whether the contractor must also provide any of the following: Removal or disconnection of the existing failed compressor; Rigging, unloading, inside delivery, and final placement; Electrical installation or connection to the existing 460-volt, three-phase service; Compressed-air piping and connection to the existing system; Connection to the existing desiccant air dryer; Startup, commissioning, performance testing, and air-quality testing; Disposal of the existing compressor; or Training or operating instruction. Answer 8: Contractor is not responsible for any of the above. This solicitation is only for the purchase of the air compressor. Question 9: The price schedule states that a desiccant air dryer is currently being used. Please confirm: Whether the existing dryer will be reused; The manufacturer and model of the existing dryer; The required inlet and discharge connection sizes; Whether adapters, flexible connectors, filters, regulators, valves, or other accessories must be supplied; Whether compatibility with the existing dryer must be confirmed by Quincy; and Whether an integrated dryer is excluded from the required compressor configuration. Answer 9: Yes there is a dryer, but we are just buying the compressor. No installation is required. Question 10: Please provide or confirm the complete Quincy catalog/configuration number for the required QOF-15 system. In particular, please clarify whether the requirement includes: A receiver tank; Duplex or independently controlled compressor modules; Master controller or sequencer; Remote alarm contacts; Filtration package; Automatic drains; Vibration isolators; Flexible connections; Factory startup; and Any accessories required for compliance with the referenced VA Technical Information Library specifications, NFPA 99, and ISO 8573-1 Class 0. Answer 10: This requirements is only for the air compressor not a full redesign. Question 11: Please confirm the required warranty period and whether installation or startup must be performed or certified by a Quincy factory-authorized service provider for the manufacturer s warranty to remain valid. Answer 11: The OEM warranty is applicable to this requirement. This requirement does not include installation or startup. Question 12: Please confirm whether the offeror must submit manufacturer documentation expressly demonstrating compliance with: VA Technical Information Library Specification 22 15 00; VA Specification 22 61 19.74; NFPA 99; and ISO 8573-1 Class 0. Answer 12: Yes. Question 13: Must contractor itself be an authorized Quincy distributor, or may a small-business prime furnish the equipment through an authorized Quincy distributor with full manufacturer traceability and warranty support? Answer 13: The contractor submitting the quote must be the authorized distributer/reseller of the OEM. Question 14: What country-of-origin, Buy American, Trade Agreements Act, and domestic-content representations are required? Answer 14: See the solicitation. Questions 15: For this small-business set-aside, is there any restriction on manufacturer size under the Nonmanufacturer Rule, or is an applicable waiver being used? Answer 15: A class waiver applies for the requirements. This acquisition is covered by an SBA Nonmanufacturer Rule class waiver. If an offeror is a nonmanufacturer, they do not need to supply the product of a small business manufacturer. However, all other NMR criteria still apply ( 500 employees for the nonmanufacturer, ownership/possession, supply the end item, etc.). The waiver does not eliminate small business subcontracting limitations under 13 CFR 125.6 and FAR 19.505. Question 16: Please confirm the required delivery date, destination, inspection/acceptance criteria, and whether freight must be included in the unit price. Answer 16: See Answer 6 for delivery information. Yes, freight must be included in the unit price. Question 17: Please confirm that questions remain due July 31, 2026, at 8:00 a.m. Central and quotes are due August 7, 2026, at 2:00 p.m. Central. Answer 17: Questions remain due July 31, 2026, at 8:00 a.m. Central and quotes are due August 7, 2026, at 2:00 p.m. Central. Question 18: The solicitation states that CPARS and other Government resources will be used for past-performance purposes. Please confirm that an offeror without relevant CPARS history will not be evaluated unfavorably solely because it lacks prior federal past-performance records. Answer 18: An offeror without relevant CPARS history will not be evaluated unfavorably solely because it lacks prior federal past-performance records.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/workspace/contract/opp/0ceaef11592145dc88ea491c01c231e1/view)
- Place of Performance
- Address: DEPARTMENT OF VETERANS AFFAIRS CENTRAL ARKANSAS VETERANS HEALTHCARE SYST 2200 FORT ROOTS DRIVE BLDG 182, NORTH LITTLE ROCK 72114, USA
- Zip Code: 72114
- Country: USA
- Zip Code: 72114
- Record
- SN07906694-F 20260801/260810080830 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |