Loren Data's SAM Daily™

fbodaily.com
SAMDAILY.US - ISSUE OF AUGUST 01, 2026 SAM #9014
SOLICITATION NOTICE

24 -- Sub-Compact Utility Tractor with Front Loader and Turf Tire Package

Notice Date
7/30/2026 12:00:00 AM
 
Notice Type
Combined Synopsis/Solicitation
 
NAICS
333111 — Farm Machinery and Equipment Manufacturing
 
Contracting Office
W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
 
ZIP Code
13602-5220
 
Solicitation Number
W911S226U3893
 
Response Due
8/7/2026 7:00:00 AM
 
Archive Date
07/30/2027
 
Point of Contact
Sarah Long, Mark Hill
 
E-Mail Address
sarah.l.long7.civ@army.mil, mark.a.hill58.civ@army.mil
(sarah.l.long7.civ@army.mil, mark.a.hill58.civ@army.mil)
 
Small Business Set-Aside
SBA Small Business Set Aside - Total
 
Description
Item: Sub-Compact Utility Tractor with Front Loader and Turf Tire Package. Brand Name: Kubota BX2380 Sub-Compact Utility Tractor package configured with a frontend loader (Kubota LA344 or equal) and heavy duty turf-safe tires. Salient Characteristics: Requirement for the procurement of a brand-name-or-equal Kubota BX2380 Sub-Compact Utility Tractor package configured with a front-end loader (Kubota LA344 or equal) and heavy-duty turf-safe tires. This utility tractor is required for groundskeeping and landscape maintenance in tight, confined spaces where standardcompact tractors are too large or heavy, risking structural damage to manicured turf and fields. Salient Characteristics: 1. Engine and Power Specifications: Engine Type: Must be a liquid-cooled, 3-cylinder diesel engine. Engine Output: Minimum 21.6 Gross Horsepower (HP) (rated up to 23.0 Gross HP). Power Take-Off (PTO) System: Must feature a standard Live Independent PTO. Rear PTO Speed: Must feature a 540 RPM speed threshold. Mid PTO Speed: Must feature a 2500 RPM speed threshold (supporting mid-mount mower compatibility). PTO Horsepower: Minimum 17.7 HP at the PTO shaft. 2. Drivetrain and Hydrostatic Transmission: Drivetrain: Must feature true Four-Wheel Drive (4WD / 4x4) with a standard operator-controlled rear differential lock. Transmission Type: Must feature a Hydrostatic Transmission (HST) with a high-low gear shift (minimum of 2 forward / 2 reverse speed ranges). Braking System: Must feature maintenance-free, wet disc brakes. Steering: Must feature hydrostatic power steering. 3. Hydraulic and 3-Point Hitch Capabilities: Hydraulic Pump Output: Must feature a minimum 6.0 Gallons Per Minute (GPM) pump flow capacity. 3-Point Hitch Type: Must feature an SAE Category I rear three-point hitch. Hitch Lift Capacity: Minimum 680 lbs. lift capacity measured 24 inches behind the lift points (pins). 4. Front Loader Attachment Specifications: Loader Integration: Must accept a factory-matched, quick-mount front-end loader. Bucket Style: Loader bucket must support two-lever quick-attach or pin-on configurations. Hydraulic Couplers: Must feature flat-faced, no-spill hydraulic couplers to prevent oil leakage during attachment swaps. Loader Lift Capacity: Minimum 613 lbs. at maximum height (measured at the pivot pin) with a quick-attach bucket. Minimum 739 lbs. with a rigid pin-on bucket. Maximum Lift Height: Minimum 70.7 inches clearance (at the pivot pin) to support unloading into utility bins. 5. Safety, Tires, and Dimensional Constraints: Operator Safety: Must include a standard, folding Roll-Over Protective Structure (ROPS). Tire Package: Must be equipped with heavy-duty, low-impact Turf Tires to prevent turf destruction. Standard agricultural or industrial tires are not acceptable. Weight Profile: Tractor dry weight (with ROPS, excluding loader attachment) must fall strictly within 1,430 to 1,445 lbs. to prevent field compaction. Turning Radius: Turning radius must be 7.5 feet or less (without brakes applied) to navigate restricted environments. Delivery Destination: FOB Destination. Assembly: Equipment must be delivered fully assembled, serviced, fluids topped off, and ready for immediate operation upon receipt.
 
Web Link
SAM.gov Permalink
(https://sam.gov/workspace/contract/opp/dff4b2f799a2493e97c3d17d3685697d/view)
 
Place of Performance
Address: Fort Sill, OK 73503
Zip Code: 73503
 
Record
SN07906199-F 20260801/260810080826 (samdaily.us)
 
Source
SAM.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2026, Loren Data Corp.