SAMDaily.us | PRESOL | 48 | LLA CHECK VALVES

SAMDAILY.US - ISSUE OF JULY 29, 2026 SAM #9011
SOLICITATION NOTICE

48 -- LLA CHECK VALVES

Notice Date: 7/27/2026 6:16:47 AM
Notice Type: Solicitation
NAICS: 332911 — Industrial Valve Manufacturing
Contracting Office: US ARMY ENGINEER DISTRICT WALLA WAL WALLA WALLA WA 99362-1876 USA
ZIP Code: 99362-1876
Solicitation Number: W912EF26QA083
Response Due: 8/13/2026 5:00:00 PM
Archive Date: 08/28/2026
Point of Contact: Gregory Moyer, Phone: 5095277207, Kristin Hyde
E-Mail Address: Gregory.Moyer@usace.army.mil, kristin.a.hernandez@usace.army.mil
(Gregory.Moyer@usace.army.mil, kristin.a.hernandez@usace.army.mil)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: This is a solicitation for commercial products, as supplemented with additional information included in this notice. The U.S. Government requires the purchase and delivery of two (2) new, 18-inch Carbon Steel Globe Body Silent Check Valves to Lower Granite Dam. Quotes must be submitted on a firm-fixed-price basis for new equipment only; remanufactured, refurbished, or ""gray market"" items will not be accepted. The supplied valves must be designed to prevent flow reversal, surge, and water hammer, complying with all applicable ASTM codes and standards. Technical requirements include a Cast Carbon Steel body (ASTM A216 Grade WCB), 316 Stainless Steel trim/disc (ASTM A351 Grade CF8M), a 302 Stainless Steel spring (ASTM A276), and stainless steel guide pins and bushings. Operational parameters dictate a minimum pressure/temperature rating of 285 PSI at 100�F, ANSI Class 150 integrally cast flanged ends with a 16-hole bolt pattern, a flow capacity of at least 110% of the equivalent pipe size, a cracking pressure of less than 1 PSI, and top-and-bottom guided disc alignment for multi-angle installation. Furthermore, the valves must feature a metal-to-metal hand-lapped drop-tight seal and a permanent corrosion-resistant stainless steel nameplate detailing the manufacturer, model, size, rating, and manufacturing date. Due to strict installation constraints, the following physical dimensions are mandatory with no exceptions allowed: a face-to-face measurement of exactly 22.5 inches, an overall diameter not exceeding 31 inches, a valve weight not exceeding 1,300 lbs, and Class 150 flanges meeting ASTM A105 and ASME B16.5 standards (25-inch outside diameter, 22.75-inch bolt circle diameter, and a 16-hole configuration).
Web Link: SAM.gov Permalink
(https://sam.gov/workspace/contract/opp/08f130546e8f4efdafd821cb6a837585/view)
Place of Performance: Address: WA 99347, USA; Zip Code: 99347; Country: USA
Record: SN07901127-F 20260729/260727230045 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

48 -- LLA CHECK VALVES