Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF DECEMBER 21, 2025 SAM #8791
SOURCES SOUGHT

65 -- TMDE Physiological Monitor Test Equipment for the Great Plains Area Indian Health Service (GPAIHS), Biomedical Department, Aberdeen, South Dakota

Notice Date

12/19/2025 11:46:09 AM
 

Notice Type

Sources Sought
 

NAICS

334515 — Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
 

Contracting Office

GREAT PLAINS AREA INDIAN HEALTH SVC ABERDEEN SD 57401 USA
 

ZIP Code

57401
 

Solicitation Number

SS-26-IHS-1520285
 

Response Due

12/29/2025 10:00:00 AM
 

Archive Date

01/13/2026
 

Point of Contact

Wenda Wright, Phone: 6052267724
 

E-Mail Address

wenda.wright@ihs.gov
(wenda.wright@ihs.gov)
 

Description

Response due date is extended from 12/26/2025 to 12/29/2025 due to Executive Order signed on 12/18/2025. December 26, 2025 will be a Federal Holiday. Sources Sought: TMDE Physiological Monitor Test Equipment for the Great Plains Area Indian Health Service (GPAIHS), Biomedical Department, Aberdeen, South Dakota. Sources Sought Notice Number: SS-26-IHS-1520285 This Sources Sought Notice is for informational and planning purposes only and shall not be construed as a solicitation, an obligation or commitment by the Indian Health Service. This notice is intended strictly for market research to determine the availability of Indian Small Businesses Economic Enterprises (ISBEE) and Indian Economic Enterprises. Your responses to the information requested will assist the Government in determining the appropriate acquisition method, including whether a set-aside is possible. The anticipated applicable NAICS code for this acquisition is 334515 � Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals. BACKGROUND The Indian Health Service (IHS) an agency within the Department of Health & Human Services is responsible for providing federal health services to American Indians and Alaska Natives. The Indian Health Service provides a comprehensive health service delivery system for approximately 1.9 million American Indians and Alaska Natives who belong to 567 federally recognized tribes, in 35 states. The Indian Health Service Headquarters is located in Rockville, MD and then divided into twelve physical areas: Alaska, Albuquerque, Bemidji, Billings, California, Great Plains, Nashville, Navajo, Oklahoma, Phoenix, Portland and Tucson. The Great Plains Area Office (GPAO) works in conjunction with its 19 Indian Health Service Units and Tribal Managed Service Units to provide health care to approximately 122,000 Native American located in North Dakota, South Dakota, Nebraska, and Iowa. The Area Office�s service units include seven hospitals, eight health centers, and several smaller health stations and satellite clinics. 2. OBJECTIVE To provide TMDE Physiological Monitor Test Equipment for use by the Indian Health Service (IHS) Biomedical Engineering Department. This equipment will be used for the testing, verification, and calibration of medical devices in IHS healthcare facilities to ensure patient safety, regulatory compliance, and optimal equipment performance. The contractor shall provide the services and equipment for the Great Plains Area IHS (GPAIHS), Biomedical Engineering Department, Aberdeen, South Dakota for the period of performance of this contract. 3. SPECIFICATIONS EQUIPMENT: SimCube SC-5kit Pronk Inflator Pressure Calibrator SimSlim SL-8 OxSim Flex w/ Mobilize The contractor shall provide all resources necessary to accomplish the tasks and deliverables described in this Statement of Work (SOW). 4. TYPE OF ORDER The award for this service will be a Firm Fixed-Price, Commercial Item , Purchase Order to provide TMDE Physiological Monitor Test Equipment. 5. ANTICIPATED PERIOD OF PERFORMANCE Period of Performance: Date of award through 90 days. 6. PLACE OF PERFORMANCE ATTN: Biomed 420 S. Garfield Suit 600 Pierre, SD 57501 7. REPORT(S)/DELIVERABLES AND DELIVERY SCHEDULE - Contractor shall provide confirmation that they are an authorized distributor of Pronk technologies TMDE equipment designated for use by biomedical technicians if they are not the Original Equipment Manufacturer (OEM). - Contractor shall arrange for shipping the equipment and supplies to the Great Plains Area Pierre Office. - Contractor shall provide 4-year warranty; parts and labor to include certifications. - Contractor shall deliver equipment calibrated according to OEM specifications. Upon completion of equipment installation, the field service personnel will provide proof of operation in the form of a service report to the Local Clinical Engineering personnel, and the COR. 8. PAYMENT Invoices submitted under any award will be required to utilize the Invoice Processing Platform (IPP) in accordance with HHSAR 352.232-71, Electronic Submission and Processing of Payment Requests�. Payment will be made upon receipt of a complete and accurate invoice, and successful completion of an acceptance inspection in accordance with the Prompt Payment Act. Invoices shall be submitted with all information and supporting documentation. A complete and accurate invoice is substantially correct in that all aspects of the required information are clearly evident on the invoice and submitted through the Invoice Processing Platform (IPP.gov) with a copy to Michael Wenk (COR), Biomedical Equipment Support Specialist, or his designee. 9. Capability Statement/Information: Interested parties are expected to review this notice and attached statement of work to familiarize itself with the requirements of this project. Failure to do so will be at your firm�s own risk. The following information shall be included in the capability statement: 1. A general overview of the respondent�s opinions about the difficulty and/or feasibility of the potential requirement, and any information regarding innovative ideas or concepts. 2. Information in sufficient detail of the respondent�s (a) current capability and capacity to perform the work; (b) prior completed events of similar nature/size; (c) organizational experience and management capability; and (d) examples of prior completed Government contracts and other related information. 3. The respondents� UEI number, organization name, address, point of contact, and size and type of business (e.g., 8(a), HUBZone, etc.) Pursuant to the North American Industry Classification System (NAICS) code: 334515 � Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals. 4. Any other information that may be helpful in developing or finalizing the requirements of the potential acquisition. 5. The capability statement shall not exceed 10 single-sided pages (including all attachments, resumes, etc.) presented in single-space and using a 12-point font size minimum, in either Microsoft Word or Adobe Portable Document Format (PDF), with 8-1/2 by 11-inch paper size, and 1 inch top, bottom, left and right margins. 6. All proprietary information should be marked as such. Statements should also include an indication of current certified small business status; this indication should be clearly marked on the first page of your capability statement (preferably placed under the eligible small business concern�s name and address). Responses will be reviewed only by IHS personnel and will be held in a confidential manner. 10. Closing Statement Point of Contact: Wenda Wright, Contract Specialist, at wenda.wright@ihs.gov Submission Instructions: Interested parties shall submit capability via email to Wenda Wright, Contract Specialist, at wenda.wright@ihs.gov. Must include Sources Sought Number SS-26-IHS1520285 in the Subject line. The due date for receipt of statements is December 26, 2025, 12:00 p.m. Central Standard Time (CST). All responses must be received by the specified due date and time in order to be considered. This notice is for information and planning purposes only and shall not be construed as a solicitation or as an obligation on the part of IHS. IHS does not intend to award a contract on the basis of responses nor otherwise pay for the preparation of any information submitted. As a result of this notice, IHS may issue a Request for Quote (RFQ). THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. However, should such a requirement materialize, no basis for claims against IHS shall arise as a result of a response to this notice or IHS�s use of such information as either part of our evaluation process or in developing specifications for any subsequent requirement. Disclaimer and Important Notes. This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization�s qualifications to perform the work. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. After a review of the responses received, a pre-solicitation synopsis and solicitation may be published in SAM.gov. However, responses to this notice will not be considered adequate responses to a solicitation. Confidentiality. No proprietary, classified, confidential, or sensitive information should be included in your response.
 

Web Link

SAM.gov Permalink
(https://sam.gov/workspace/contract/opp/c441aac2496f47c69ac93de1ad4ea0bd/view)
 

Place of Performance

Address: Aberdeen, SD 57401, USA

Zip Code: 57401

Country: USA
 

Record

SN07671752-F 20251221/251219230035 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |