Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF DECEMBER 17, 2025 SAM #8787
SPECIAL NOTICE

20 -- USCGC Healy Crane Smart Equipment

Notice Date

12/15/2025 9:56:57 AM
 

Notice Type

Special Notice
 

NAICS

336611 — Ship Building and Repairing
 

Contracting Office

SFLC PROCUREMENT BRANCH 2(00085) ALAMEDA CA 94501 USA
 

ZIP Code

94501
 

Solicitation Number

70Z08526Q0001859
 

Response Due

12/22/2025 8:00:00 AM
 

Archive Date

01/06/2026
 

Point of Contact

Lindsay Mongiovi, Phone: 5716086752
 

E-Mail Address

lindsay.n.mongiovi@uscg.mil
(lindsay.n.mongiovi@uscg.mil)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

THIS SOLICITATION IS POSTED FOR INFORMATIONAL PURPOSES ONLY THIS HAS BEEN AWARD VIA JOTFOC Statement of Work Crane Smart Equipment USCGC Healy GENERAL 1.1 Background The Coast Guard is seeking to procure 03 Dual winch and 02 Main winch Crane Smart Load Management Interface (LMI) kits to replace the existing and outdated LMI system and install the new computer system and calibrate with a load test onboard USCGC Healy. The new LMI system shall integrate with the existing cranes. Scope The contractor shall provide the brand name Crane Smart components: QTY: 05 Color-touch screen display panel, with audible and visual alarms at panel, dedicated output for solenoid valve(s) [if installed on crane], mag mount antenna, mounting bracket, and power cable. P/N: 9005-0013 QTY: 05 Main winch anti-2-block switch, counterweight, chain, and mounting hardware. P/N: 9012-0000 QTY: 03 Boom angle transmitter with cable reel boom length system. P/N: 900-1085B QTY: 03 Main winch load cell for 7/8� wire rope. P/N: 9004-0020 QTY: 02 Main winch load cell for �� � �� wire rope. P/N: 9004-3010 QTY: 02 Main boom angle transmitters with the pre-programming of load charts. P/N: 900-1030. Shows length, radius, tip height and percentage of maximum load (LMI-LAT). QTY: 03 Auxiliary winch load cell for �� � �� wire rope. P/N: 9004-3011 QTY: 03 Auxiliary winch anti-2-block switches, counterweights, chains, and mounting hardware. P/N: 9012-0001 QTY: 02 Auxiliary boom angle transmitters with the pre-programming of load charts. P/N: 900-1031. Shows length, radius, tip height and percentage of maximum load (LMI-LAT) REQUIREMENTS The below subassemblies that are required for each crane: STBD Aft Knuckle Crane: P/N: 9005-0013, Color touch screen display panel with alarms with mounting hardware P/N: 9004-0020, 7/8� Main Winch load cell P/N: 9012-0000, Main winch anti-2-block switch, counterweight, chains, and mounting hardware P/N: 900-1030, Main Boom angle transmitter with programed load chart P/N: 9004-3011, ��-3/4� Auxiliary winch load cell P/N: 9012-0001, Auxiliary winch anti-2-block switch, counterweight, chains, and mounting hardware P/N: 900-1030, Auxiliary Boom angle transmitter with programed load chart Port Aft Knuckle Crane: P/N: 9005-0013, Color touch screen display panel with alarms with mounting hardware P/N: 9004-0020, 7/8� Main Winch load cell P/N: 9012-0000, Main winch anti-2-block switch, counterweight, chains, and mounting hardware P/N: 9004-3011, ��-3/4� Auxiliary winch load cell P/N: 9012-0001, Auxiliary winch anti-2-block switch, counterweight, chains, and mounting hardware P/N: 900-1030, Boom angle transmitter with programed load chart Port 04 Deck Crane: P/N: 9005-0013, Color touch screen display panel with alarms with mounting hardware P/N: 9004-0020, 7/8� Main Winch load cell P/N: 9012-0000, Main winch anti-2-block switch, counterweight, chains, and mounting hardware P/N: 9004-3011, ��-3/4� Auxiliary winch load cell P/N: 9012-0001, Auxiliary winch anti-2-block switch, counterweight, chains, and mounting hardware P/N: 900-1085B, boom angle transmitter with programed load chart STBD 04 Deck Crane: P/N: 9005-0013, Color touch screen display panel with alarms with mounting hardware P/N: 9004-0020, 7/8� Main Winch load cell P/N: 9012-0000, Main winch anti-2-block switch, counterweight, chains, and mounting hardware P/N: 9004-3011, ��-3/4� Auxiliary winch load cell P/N: 9012-0001, Auxiliary winch anti-2-block switch, counterweight, chains, and mounting hardware P/N: 900-1085B, boom angle transmitter with programed load chart Bow Crane P/N: 9005-0013, Color touch screen display panel with alarms with mounting hardware P/N: 9004-0020, 7/8� Main Winch load cell P/N: 9012-0000, Main winch anti-2-block switch, counterweight, chains, and mounting hardware P/N: 900-1085B, boom angle transmitter with programed load chart 2.5 Delivery Location Deliver to: USCG Base Seattle ATTN: USCGC Healy 1519 Alaskan Way S Seattle, WA 98134 2.6 References N/A 2.7 Submittals and Approvals For any questions regarding this scope of work please contact: Igor Guerrero at igor.guerrero@uscg.mil 3. PERIOD OF PERFORMANCE The period of performance is ninety (90) calendar days from date of contract award.
 

Web Link

SAM.gov Permalink
(https://sam.gov/workspace/contract/opp/fe4cc066dd854dc49515734818aec86d/view)
 

Place of Performance

Address: Seattle, WA 98134, USA

Zip Code: 98134

Country: USA
 

Record

SN07665693-F 20251217/251215230037 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |