SOLICITATION NOTICE
43 -- Hydrogen Compressor / Gas Booster
- Notice Date
- 4/17/2025 8:19:41 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333912
— Air and Gas Compressor Manufacturing
- Contracting Office
- W6QK ACC- DTA WARREN MI 48397-5000 USA
- ZIP Code
- 48397-5000
- Solicitation Number
- W912CH25QA011
- Response Due
- 5/15/2025 2:00:00 PM
- Archive Date
- 05/29/2025
- Point of Contact
- Troy Haarala, Phone: 5715889334
- E-Mail Address
-
troy.r.haarala.civ@army.mil
(troy.r.haarala.civ@army.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Awardee
- null
- Description
- Compact Electric Hydrogen Compressor/Gas Booster, below are required specs to support the project.Electric gas booster/compressor for use to compress hydrogen.-Two-Stage.-Must be electrically driven with 220VAC/single phase power.-Gas inlet max pressure at 4,200 psi-Gas outlet max pressure at 12,500 psi-Include an inlet gas pressure reducers with bypass line and shutoff valve-Include pressure relief valve set at 11,500 psi-All vent ports must be connected to a common port separated for the relief and vent valves-Include a manual start/stop switch, hour meter, both inlet and outlet gauges, cooling fan, outlet shutoff valve-Must be under 160 lbs-Must be smaller than 38in x 12in x 24in; ***AMENDED*** - Add National Fire Protection Association (NFPA) under NFPA 70, is also known as the National Electrical Code (NEC), C1D2 COMPONENTS INCLUDED ARE THE MOTOR, COOLING FAN, AND PRESSURE SWITCHES. NON-ATEX COMPONENTS MOUNTED REMOTELY IN AN ENCLOSED BOX WITH A 20-FOOT CORD ARE THE HOUR METER, ON/OFF SWITCH, RELAYS, CIRCUIT BREAKER, AND E-STOP.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/685c7dce8cbe41838ff76abfc6fafc7c/view)
- Record
- SN07412950-F 20250419/250417230047 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |