SOURCES SOUGHT
99 -- 9-Millimeter (mm) Close Combat Mission Capability Kits (CCMCK)
- Notice Date
- 4/15/2025 10:40:39 AM
- Notice Type
- Sources Sought
- Contracting Office
- W6QK ACC-PICA PICATINNY ARSENAL NJ 07806-5000 USA
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN-25-R-0050
- Response Due
- 5/16/2025 12:00:00 PM
- Archive Date
- 05/31/2025
- Point of Contact
- Emmanuel Perez, Mariah L. Hanko
- E-Mail Address
-
emmanuel.f.perez.civ@army.mil, mariah.l.hanko.civ@army.mil
(emmanuel.f.perez.civ@army.mil, mariah.l.hanko.civ@army.mil)
- Description
- DESCRIPTION: The United States (U.S.) Army Contracting Command - New Jersey (ACC-NJ) on behalf of the Project Manager for Maneuver Ammunition System (PM MAS) is seeking sources for the 9-millimeter (mm) Marking Cartridges for use in the Close Combat Mission Capability Kit (CCMCK). The CCMCK is a user installed temporary weapon conversion system that allows the Soldier to employ the individual weapon (M17, M18, M9, M11 pistols, and M4 Carbine) at short-range using low velocity marking ammunition while precluding the weapon from firing standard service ammunition. The system will provide normal environmental/weapon employment cues (aiming, firing, ejection, immediate action, load, and re-load, etc.) and immediate target feedback through force-on-force, interactive live fire scenario task, and mission execution. The marking ammunition shall be a reduced-energy, non-lethal cartridge that leaves a bright, water-soluble color marking compound on target upon impact, without penetrating the soldiers Army Combat Uniform (ACU) or Personnel Protective Equipment (PPE). The visible impact left by the marking compound allows for an accurate assessment of simulated lethality and shot placement. SPECIFICATION: The ammunition must meet all requirements outlined in the Performance Specification MIL-PRF-32312. The Performance Specification is marked Distribution D (Authorized to the Department of Defense (DoD) and DoD contractors only). Requests for the performance specification shall be submitted in writing using AMSTA-AR Form 1350 Technical Data Request Questionnaire (attached) along with a signed DD 2345 Military Critical Technical Data Agreement form and a fully executed Non-Disclosure and Non-Use Agreement (attached). Offerors must be registered with the U.S./Canada Joint Certification Office to obtain a copy of the specification and top drawings (See www.dlis.dla.mil/jcp/ for instructions and information). Offerors should submit their certification via DD Form 2345 or register immediately. In order to provide the data to foreign subcontractors, offerors must apply for an export license. An offeror's delay in applying for DD 2345 certification or an export license will not be a basis to extend the closing date of any future request for proposal. The ammunition must be compatible with the current U.S. Army qualified CCMCK weapon conversion system for the M17, M18, M9, and M11 and the U.S. Marine Corps qualified CCMCK upper receiver conversion system for the M4 Carbine. The National Stock Number (NSN) for the 9mm M9 weapon CCMCK conversion kit is 1005-20-003-2362. The NSN for the M11 weapon CCMCK conversion kit is 1005-20-003-2361. The NSN for the M4 Carbine CCMCK upper receiver conversion kit is 1005-01-454-9283. The NSN for the M17 weapon is 1005-01-661-7317. The NSN for the M18 weapon is 1005-01-663-7323. No additional weapon conversions or modifications outside of the current CCMCK system will be allowed. Interested sources without a previously verified design will be responsible for verifying their cartridge design in accordance with the Performance Specification MIL-PRF-32312 at their own expense. Sources interested in supplying the marking ammunition should adequately describe their experience in small caliber production and testing, annual production capacity, and verification status of their proposed design. Those sources should also submit an outline of their plans and schedule to verify their design in addition to any backup data to support claims that their design will conform to the MIL-PRF-32312 requirements at their own expense. Sources shall provide verification status of the marking ammunition cartridges that will be supplied. PLANNED ACQUISITION: This notice is being issued for informational purposes only. The Government is seeking interested sources to fulfill Fiscal Year (FY)26-31 requirements. The Government is contemplating award of a single Firm Fixed Price Indefinite Delivery Indefinite Quantity contract. The estimated quantity to be purchased is approximately 24,800,000. Initial delivery is required 120 days after award at a rate of 500,000 per month. SUBMISSION INFORMATION: Responses shall be submitted electronically via e-mail to: Emmanuel.f.perez.civ@army.mil, no later than 3:00pm Eastern on 16 May 2025. Offerors are instructed to include �9mm CCMCK� as the subject of their response. Interested companies should respond by providing the Government the following information: (1) Name of company and Commercial and Government Entity (CAGE) Code; (2) Point of Contact name, telephone number and e-mail address; (3) Company address; (4) Business type/size information; If a small business, please indicate any applicable socio-economic status such as: Small Disadvantaged Business (SDB), Service Disabled Veteran-Owned Small Business (SDVOSB), 8(a), HUB Zone, etc. (5) Identification of interest in this opportunity as a subcontractor; (6) (a) A detailed description of the company�s manufacturing, inspection, and testing capabilities, facilities, production equipment and status, personnel, and past commercial and United States Government manufacturing experience with 9mm cartridges for CCMCK; (b) a timeline to begin production, not to exceed 120 days after contract award; (c) monthly and annual production capacities with assumptions about number of shifts and any other production factors that may affect monthly capacities with evidence of proven monthly production at a minimum of 500,000; (d) minimum order quantity required (if applicable); (e) manufacturing lead time for each item listed (schedule shall include testing against MIL-PRF-32312, if not already performed); (f) a brief summary of possible partnering/teaming arrangements; (g) sketches, drawings, specifications, brochures and current estimated unit cost per million; (h) sources not having a previously verified design should also submit an outline of their plans and schedule to verify their design in addition to any contractor performed testing results and data to support claims that their design will conform to the MIL-PRF-32312 requirements. Please identify any proprietary information submitted. A respondent to this survey must have the majority of the skills and facilities that are required to manufacture this item. If a respondent does not have these resources (technical, manufacturing, personnel, etc.) available, then it must demonstrate its ability to obtain them in a reasonable time period. If a respondent chooses to utilize the services of sub-tier vendors or subcontractors, those vendors or subcontractors must also meet the same resource criteria as the prime contractor. DISCLAIMER: This market survey is for information and planning purposes only. The Government does not intend to award a contract on the basis of this market survey. Participation in this effort is strictly voluntary and any of the information stated above is subject to change. The Government reserves the right to use any non-proprietary information in any resultant solicitation(s). Proprietary information should be marked as such. If a formal solicitation is generated at a later date, the Government will publish a solicitation notice. Please be advised that the Government will not pay for any information submitted under this announcement and that all information is to be submitted at no cost or obligation to the Government. THIS IS NOT A SOLICITATION AND DOES NOT OBLIGATE THE GOVERNMENT TO ISSUE A SOLICITATION.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/1ae4a702311b43239d8e29446bec40d5/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN07409952-F 20250417/250415230049 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |