Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF APRIL 12, 2025 SAM #8538
SOLICITATION NOTICE

20 -- MAPLE DD FY25_Doors, Hatches, Scuttles

Notice Date

4/10/2025 1:17:06 PM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

336611 — Ship Building and Repairing
 

Contracting Office

SFLC PROCUREMENT BRANCH 2(00085) ALAMEDA CA 94501 USA
 

ZIP Code

94501
 

Solicitation Number

70Z085Q250012536
 

Response Due

4/21/2025 8:00:00 AM
 

Archive Date

04/21/2025
 

Point of Contact

DONNA O'NEAL, Phone: 5103931145, GEORGE, JERAMYAH, Phone: 5104375436
 

E-Mail Address

Donna.J.O'Neal@uscg.mil, JERAMYAH.W.GEORGE@USCG.MIL
(Donna.J.O'Neal@uscg.mil, JERAMYAH.W.GEORGE@USCG.MIL)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

this is to be awarded based off lowest price technically acceptable and past preformance. USCGC MAPLE (WLB 207) SPECIFICATION FOR FABRICATION OF WATERTIGHT DOORS, HATCHES, AND SCUTTLES FY2025 Developed By: Jason W. Taylor (Rev-0, 11 March 2025) TABLE OF CONTENTS Revisions Record. iii Consolidated List of References. iv WORK ITEM 1: Fabrication of Water Tight and Non Water Tight Doors, Hatches, and Scuttles 5 Revisions Record This page is used to record specification revisions, which may have occurred subsequent to a Revision 0 (Rev-0) package. Information listed is intended to provide contractors and field unit personnel a means to ensure all the current specification revision pages are present when reviewing or utilizing this specification package. DATE REV# WORK ITEM# CHANGES MADE NOTE : All work item and paragraph numbers listed above for a given revision correspond to same numbers in the previous revision. This revised specification is self-contained with all of the above listed changes incorporated. Consolidated List of References The below-listed documents form a part of this specification to the extent specified herein. Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at the time of specification writing and during contract execution. All Coast guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed � free of charge � from links located on the SFLC website. Commercial sites provide access to their respective documents. COAST GUARD DRAWINGS Coast Guard Drawing 225B WLB 167-001, Rev-R, Structural Closures Coast Guard Drawing 225B-WLB-631-001, Rev G, 2000, Paint Schedule NAVSEA Drawing 167-7379842, Rev A, Procedure & Welding Sequence for Non-Ballistic, Watertight & Airtight Quick Acting or Individually Dogged Personnel Doors COAST GUARD PUBLICATIONS Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors Manual Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures OTHER REFERENCES Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for Shipyard Employment Commercial Item Description (CID) A-A-59316, 2016, Abrasive Materials; for Blasting Military Specification MIL-A-22262B, March 1996, Abrasive Blasting Media Ship Hull Blast Cleaning NAVSEA Technical Publication T9074-AD-GIB-010/1688, (TP 1688), July 2012, Requirements for Fabrication, Welding, and Inspection of Submarine Structure The Society for Protective Coatings (SSPC) Surface Preparation Standard No. 11 (SSPC-SP 11), 2013, Power-Tool Cleaning to Bare Metal The Society for Protective Coatings (SSPC)/NACE International (NACE) 2007, Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, Near-White Metal Blast Cleaning ITEM 1: Fabrication of Watertight and Non-Watertight Doors, Hatches, and Scuttles 1. SCOPE 1.1 Intent. This work item describes the requirements for the Contractor to fabricate watertight and non-water tight doors, hatches, and scuttles identified in Table 1 in accordance with drawings and references. Table 1 - Watertight Doors and Scuttle locations Description Location P/N and Description QTY Drawing Watertight Scuttle Escape Trunk (1-19-2-T) PN: 6 Scuttle - 21-inch Diameter CO, RSD, QA, WTRTT . 01 Each 225B WLB 167- 001 Watertight Door ATON Shop (1-21-2-Q) PN: 11 Door - 26 x 66 inches, CO, WEAT, LH, W/Hasp, and staple, and 9-inch fixed light. 01 Each 225B WLB 167-001 Watertight Door PFD Locker (02-75-1-Q) PN: 20 Door - 26 x 66 inches, CO, WEAT, RH, W/Hasp, and staple, without light. 01 Each 225B WLB 167-001 Watertight Door Incinerator Room (02-85-0- Buoy PN: 20 Door - 26 x 66 inches, CO, WEAT, RH, W/Hasp, and staple, without light. 01 Each 225B WLB 167-001 Watertight Door Deck Control Booth (01-27-0-C) Q) PN: 20 Door - 26 x 66 inches, CO, WEAT, RH, W/Hasp, and staple, without light. 01 Each 225B WLB 167-001 Watertight Hatch Passage (3-21-0-l) PN: 24A Hatch � 30 in x 30 in, CO, RSD, WTRTT, INDV Dogged, W/18 in Dia CO FL QA WTRTT Scuttle 01 Each 225B WLB 167-001 Watertight Hatch BOSON STRM #1 (1-0-0-A) PN: 17 Hatch � 30 in x 30 in, CO, RSD, WTRTT, 8 dog, W/21 in, DIA QA, WTRTT Scuttle 01 Each 225B WLB 167-001 Watertight Hatch BOSON STRM #2 (1-6-1-A) PN: 17 Hatch � 30 in x 30 in, CO, RSD, WTRTT, 8 dog, W/21 in, DIA QA, WTRTT Scuttle 01 Each 225B WLB 167-001 1.2 Government-furnished property None 2. REFERENCES Coast Guard Drawings Coast Guard Drawing 225B WLB 167-001, Rev-R, Structural Closures Coast Guard Drawing 225B-WLB-631-001, Rev G, 2000, Paint Schedule NAVSEA Drawing 167-7379842, Rev A, Procedure & Welding Sequence for Non-Ballistic, Watertight & Airtight Quick Acting or Individually Dogged Personnel Doors Coast Guard Publications Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures Other References Commercial Item Description (CID) A-A-59316, 2016, Abrasive Materials; for Blasting Military Specification MIL-A-22262B, March 1996, Abrasive Blasting Media Ship Hull Blast Cleaning The Society for Protective Coatings (SSPC)/NACE International (NACE) 2007, Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, Near-White Metal Blast Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Standard No. 11 (SSPC-SP 11), 2013, Power-Tool Cleaning to Bare Metal 3. REQUIREMENTS 3.1 General. 3.1.1 CIR. None. 3.1.2 Tech Rep. Not applicable. 3.1.3 Protective measures. Not Applicable 3.1.4 Interferences. Not Applicable 3.1.5 Testing. All testing to be completed in accordance with drawings and Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes 3.1.6 Shipping. Contractor shall construct container to ship doors and hatches and must include pricing for shipping to CGC MAPLE, C/O CWO Erik Bratland, Surface Forces Logistics Command, 2401 Hawkins Point Road, Baltimore, MD, 21226-1797, Building 58. 4. NOTES Period of Performance: 09/16/2025 to 12/14/2025 (Ship to: CG Yard, 2401 Hawkins Point, Rd. Baltimore, MD 21266 ATTN: C/O CWO Erik Bratland, CGC Maple)
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/936ed606e92a4f8f86c27feeb4423ccf/view)
 

Place of Performance

Address: Curtis Bay, MD 21226, USA

Zip Code: 21226

Country: USA
 

Record

SN07404535-F 20250412/250410230103 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |