Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF MARCH 28, 2025 SAM #8523
SOLICITATION NOTICE

20 -- IDA LEWIS Watertight Doors/Hatch/Scutt

Notice Date

3/26/2025 10:14:09 AM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

336611 — Ship Building and Repairing
 

Contracting Office

SFLC PROCUREMENT BRANCH 2(00085) ALAMEDA CA 94501 USA
 

ZIP Code

94501
 

Solicitation Number

70Z085Q250012029
 

Response Due

4/3/2025 8:00:00 AM
 

Archive Date

04/03/2025
 

Point of Contact

GEORGE, JERAMYAH, Phone: 5104375436, DONNA O'NEAL, Phone: 5103931145
 

E-Mail Address

JERAMYAH.W.GEORGE@USCG.MIL, Donna.J.O'Neal@uscg.mil
(JERAMYAH.W.GEORGE@USCG.MIL, Donna.J.O'Neal@uscg.mil)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

THIS IS TO BE AWARDED BASED OFF LOWEST PRICE TECHNICALLY ACCEPTABLE AND PAST PREFORMANCE. USCGC IDA LEWIS (WLM 551) SPECIFICATION FOR FABRICATION OF WATERTIGHT AND NON-WATERTIGHT DOORS, HATCHES, AND SCUTTLES FY2025 Developed By: Jason W. Taylor (Rev-0, 05 March 2025) TABLE OF CONTENTS Revisions Record. iii Consolidated List of References. iv WORK ITEM 1: Fabrication of Water Tight and Non Water Tight Doors, Hatches, and Scuttles 5 Revisions Record This page is used to record specification revisions, which may have occurred subsequent to a Revision 0 (Rev-0) package. Information listed is intended to provide contractors and field unit personnel a means to ensure all the current specification revision pages are present when reviewing or utilizing this specification package. DATE REV# WORK ITEM# CHANGES MADE NOTE : All work item and paragraph numbers listed above for a given revision correspond to same numbers in the previous revision. This revised specification is self-contained with all of the above listed changes incorporated. Consolidated List of References The below-listed documents form a part of this specification to the extent specified herein. Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at the time of specification writing and during contract execution. All Coast guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed � free of charge � from links located on the SFLC website. Commercial sites provide access to their respective documents. COAST GUARD DRAWINGS Coast Guard Drawing 175-WLM 167-001, Rev L, 2014, Structural Closures Coast Guard Drawing 175-WLM-624-001, Rev F, 1998, Joiner Door Schedule Coast Guard Drawing 175-WLM-631-002, Rev E, 2000, Paint Schedule COAST GUARD PUBLICATIONS Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors Manual Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures OTHER REFERENCES Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for Shipyard Employment Commercial Item Description (CID) A-A-59316, 2016, Abrasive Materials; for Blasting Military Specification MIL-A-22262B, March 1996, Abrasive Blasting Media Ship Hull Blast Cleaning NAVSEA Technical Publication T9074-AD-GIB-010/1688, (TP 1688), July 2012, Requirements for Fabrication, Welding, and Inspection of Submarine Structure The Society for Protective Coatings (SSPC) Surface Preparation Standard No. 11 (SSPC-SP 11), 2013, Power-Tool Cleaning to Bare Metal The Society for Protective Coatings (SSPC)/NACE International (NACE) 2007, Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, Near-White Metal Blast Cleaning ITEM 1: Fabrication of Watertight and Non-Watertight Doors, Hatches, and Scuttles 1. SCOPE 1.1 Intent. This work item describes the requirements for the Contractor to fabricate watertight and non-water tight doors, hatches, and scuttles identified in Table 1 in accordance with drawings and references. Table 1 - Watertight Doors and Scuttle locations Description Location P/N and Description QTY Drawing Watertight Scuttle Main Deck (1-20-2) PN: 7 21-inch Diameter Quick-Acting Watertight Flush Scuttle, Steel, 3-Dog, Fwd Hinge (including associated 12� height coaming) hasp and staple. 01 Each 175-WLM 167-001 Watertight Hatch Main Deck (1-50-1) PN: 6 QAWTH 1-5-0; 30� x 30� Quick-Acting Watertight Hatch, Steel, (Raised 12-inch coaming, 21� QAWTS (hinge fwd.)), including 12-inch height coaming. 01 Each 175-WLM 167-001 Watertight Door ATON Shop (1-10-0-Q) PN: 11 26� x 66� C.O., WT, QA, LH, 10-Dog W/ HASP and Staple, W/O Fixed Light Low Type Cres Hinges. Steel. 01 Each 175-WLM 167-001 Watertight Door Passageway Main Deck (1-52-0-L) PN: 18 Door � 30� x 66� C.O., WT, QA, RH, 10 Dog w/ Hasp and Staple w/ Fixed Light Low Type Cres Hinges, Steel. 01 Each 175-WLM 167-001 Watertight Scuttle Line Locker (1-0-0-Q) PN: 9 Scuttle � 18� Dia. C.O., RSD, QA, WT, w/ internal toggle pin lock on scuttle, steel, coaming 12� height. 01 Each 175-WLM 167-001 Joiner Door Boatswains Storeroom (1-6-0-Q) PN: 02 Door, Joiner, steel, 26 x 76 ��, 1 �� coaming height, LH, INBD, w/ window and kickout. PNL Req�d. 01 Each 175-WLM-624-001 Joiner Door Paint Locker (1-9-2-K) PN: 08 Door, Joiner, steel, 26 x 76 ��. 1 �� coaming height, RH, FWD, Fumetight window & kick-out panel REQ�d. LOC 4� FWD FR 13. 01 Each 175-WLM-624-001 Weathertight Door PFD Locker (Starboard) (02-61-1-Q) PN: 16 Door, 26� x 66� C.O., Weat, RH, w/ hasp and staple, w/o fixed light, steel. 01 Each 175-WLM 167-001 1.2 Government-furnished property None 2. REFERENCES Coast Guard Drawings Coast Guard Drawing 175-WLM 167-001, Rev L, 2014, Structural Closures Coast Guard Drawing 175-WLM-624-001, Rev F, 1998, Joiner Door Schedule Coast Guard Drawing 175-WLM-631-002, Rev E, 2000, Paint Schedule Coast Guard Publications Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures Other References Commercial Item Description (CID) A-A-59316, 2016, Abrasive Materials; for Blasting Military Specification MIL-A-22262B, March 1996, Abrasive Blasting Media Ship Hull Blast Cleaning The Society for Protective Coatings (SSPC)/NACE International (NACE) 2007, Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, Near-White Metal Blast Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Standard No. 11 (SSPC-SP 11), 2013, Power-Tool Cleaning to Bare Metal 3. REQUIREMENTS 3.1 General. 3.1.1 CIR. None. 3.1.2 Tech Rep. Not applicable. 3.1.3 Protective measures. Not Applicable 3.1.4 Interferences. Not Applicable 3.1.5 Testing. All testing to be completed in accordance with drawings and Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes 3.1.6 Shipping. Contractor shall construct container to ship doors and hatches and must include pricing for shipping to CGC IDA LEWIS, CO CWO Michael Scalia, Surface Forces Logistics Command, 2401 Hawkins Point Road, Baltimore, MD, 21226-1797, Building 58. 4. NOTES None
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/7d783d42d1c24eaf96ed97a33051ee6d/view)
 

Place of Performance

Address: Curtis Bay, MD 21226, USA

Zip Code: 21226

Country: USA
 

Record

SN07386773-F 20250328/250326230054 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |