SOLICITATION NOTICE
20 -- CGC HOLLYHOCK FUEL OIL PURIFIER INSPECT
- Notice Date
- 1/30/2025 9:26:58 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- SFLC PROCUREMENT BRANCH 2(00085) ALAMEDA CA 94501 USA
- ZIP Code
- 94501
- Solicitation Number
- 70Z085Q250002241
- Response Due
- 2/7/2025 8:00:00 AM
- Archive Date
- 02/07/2025
- Point of Contact
- GEORGE, JERAMYAH, Phone: 5104375436, KYLER FISK, Phone: 9492881271
- E-Mail Address
-
JERAMYAH.W.GEORGE@USCG.MIL, KYLER.C.FISK@USCG.MIL
(JERAMYAH.W.GEORGE@USCG.MIL, KYLER.C.FISK@USCG.MIL)
- Description
- THIS IS NOTICE OF INTENT TO AWARD SOLE SOURCE Points of Contact: CGC HOLLYHOCK 2401 Hawkins Point Rd Baltimore, MD 21226 POC Adam D. Barton, ENG4 Engineer Officer 571-607-5222 Email: Adam.D.Barton@uscg.mil Product Line Support: LTJG Christopher Lansing 443-764-4921 Christopher.g.lansing@uscg.mil Description of Problem: CGC Hollyhock has had significant issues operating their Fuel Oil Purifier (FOP) system. While conducting inspection of FOP #2, Ship�s Force (SF) discovered several parts that were missing. SF Purchased and replaced parts, with no improvements. FOP #1 received a new seal and was operating until SF encountered fuel manifold issues restricting suction from tanks at frame 30 and forward. Manifold was bore-scoped by CG Yard with negative results of obstructions. Also, FOP #1 will not dump sludge during its dump cycle and will shut itself down. Upon shut down, a high vibration alarm code is thrown that may be associated. Tech Rep Requirements: Contractor will be certified by OEM (Alpha Laval) to work on Alpha Laval specific equipment and systems. Fuel Oil Purifier Info: WHPX-405-TGD-24-60 Work to be performed: USCG is requesting on-site troubleshooting assistance to further diagnose issues pertaining to sludge dump, water seal, determine cause of shut down, as well as, cause for loss of suction to forward tanks. If applicable, determine spare parts list requirement. If repairs are able to made on site, require operational test and/or inspection report with recommendations for SF testing to be signed off by cutter Engineer Officer for quality assurance. Desired Period of performance Windows: Flexible based on the operational schedule of the cutter Technical references: SFLC Std Spec 0000 General Requirements SFLC Std Spec 0740 Welding and Allied Processes SFLC Std Spec 5000 Auxiliary Machine Systems SFLC Std Spec 5550 Fire Prevention and Response
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/2213494816184356a0c67db66908a228/view)
- Place of Performance
- Address: Curtis Bay, MD 21226, USA
- Zip Code: 21226
- Country: USA
- Zip Code: 21226
- Record
- SN07328065-F 20250201/250130230110 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |