SOURCES SOUGHT
34 -- Request for Information - Single Edge Blades (2 types of blades)
- Notice Date
- 1/29/2025 1:36:37 PM
- Notice Type
- Sources Sought
- NAICS
- 333515
— Cutting Tool and Machine Tool Accessory Manufacturing
- Contracting Office
- W6QK ACC-APG NATICK NATICK MA 01760-5011 USA
- ZIP Code
- 01760-5011
- Solicitation Number
- RFI-SingleEdgeBlades(2typesofblades)
- Response Due
- 2/28/2025 2:00:00 PM
- Archive Date
- 03/15/2025
- Point of Contact
- Christine Poulack, Mary Prebensen
- E-Mail Address
-
christine.p.poulack.civ@army.mil, mary.k.prebensen.civ@army.mil
(christine.p.poulack.civ@army.mil, mary.k.prebensen.civ@army.mil)
- Description
- SYNOPSIS: This Sources Sought Announcement is to assist the US Army DEVCOM Soldier Center to identify potential sources that possess the technical capability and qualifications in meeting the Government�s minimum needs for two types of single edge double bevel design blades for use in cutting apparatus (Sauer {Neumag} NMC 150 [NMC-H Series]) to provide staple sized synthetic fiber for production materials in support of Combat Capabilities Development Command �Solider Center (CCDC-SC) Fiber Project Branch (FPB). The Government requests that responses be submitted electronically to mary.k.prebensen.civ@army.mil and christine.p.poulack.civ@army.mil by 28 FEB 2025 by 5pm EST. Background: The Government (DEVCOM Soldier Center) Distinctive Materials Solutions Branch (DMSB) needs two types of single edge blades for use in cutting apparatus (Sauer {Neumag} NMC 150 [NMC-H Series]) to provide staple sized synthetic fiber for production materials to support customer requirement for their end product. Description: The contractor WILL BE expected to fabricate single edge, double bevel design blades General Specifications for first set single edge blades: L: 0.630"" W: 0.315"" Thickness: 0.019"" Tolerance: 0.005"" Single Edge, Double Bevel (20 deg/40 deg) Weight approx... 0.8-1.2 grams Polished all edges and surfaces to a 2 RMS finish General Specifications for second set single edge blades: L: 48.0mm W: 8.0mm Thickness: 0.9mm Single Edge, Double Bevel (33 deg/17 deg) Polished all edges and surfaces to a 2 RMS finish Specific Specifications: Tungsten Carbide (WC): 85-94% - Currently 92% Cobalt (Co): 6-15% - currently 12% (Better than a Grade C-2) Wear resistance: Extra High Hardness (HRA): 92-95 -Currently 92 Ultra-Fine Grain Size (WC): 0.6-0.8 Density (g/cm3): 14-15 - Currently 14 Deliverables: First set of blades listed in Requirement a. above: Three shipments containing 1,000 blades/shipment or single shipment of 3,000 blades within 6-8 weeks after receipt of order. Second set of blades listed in Requirement b. above: Four shipments containing 1,000 blades/shipment or single shipment of 4,000 blades within 6-8 weeks after receipt of order. Delivery Date: The Government anticipates 20 weeks/months lead time for this item. Interested parties are invited to submit a response to this Sources Sought Announcement. THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY This Sources Sought Announcement is issued solely for information and planning purposes and to identify interested sources. THIS IS NOT A SOLICITATION. No contract will be awarded from this announcement. This Sources Sought does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. It is subject to change and is not binding on the Government. Further, unsolicited proposals will not be accepted. Funding is not available at this time. The United States Army has not made a commitment to procure any of the items/services discussed, and release of this Sources Sought Announcement should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. Response to this Sources Sought Announcement is voluntary and no reimbursement will be made for any costs associated with providing information in response to this and any follow-on information requests. All submissions become Government property and will not be returned. Not responding to this Sources Sought Announcement does not preclude participation in any future RFP if any is issued. If a solicitation is released, it will be synopsized in the SAM.gov website. It is the responsibility of the potential responders to monitor this site for additional information pertaining to this subject. RESPONSES: Interested parties may identify their interest and capability by sending responses regarding this requirement to DEVCOM Soldier Center via e-mail ONLY to mary.k.prebensen.civ@army.mil and christine.p.poulack.civ@army.mil no later than 28 FEB 2025 by 5:00 p.m. EST. The U.S. Government will not pay for any information or administrative cost incurred in response to this Notice. All costs associated with responding to this Notice will be solely at the expense of the interested party. Please provide business size (indicate your socioeconomic status), applicable NAICS code, and CAGE code. If you hold a GSA Federal Supply Schedule contract, please identify your contract number. QUESTIONS: Any questions for clarification may be emailed to mary.k.prebensen.civ@army.mil and christine.p.poulack.civ@army.mil no later than 25 FEB 2025 by 5:00 p.m. EST. Verbal questions will NOT be accepted. Questions shall NOT contain proprietary or classified information. An unattributed list of questions and answers will be published at the same web location of this Sources Sought Announcement.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/e671b572a6c247b39798e3cca8a61f36/view)
- Place of Performance
- Address: MA 01760, USA
- Zip Code: 01760
- Country: USA
- Zip Code: 01760
- Record
- SN07327133-F 20250131/250129230114 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |