SOURCES SOUGHT
66 -- 66--Sources Sought: Water Shaker Table
- Notice Date
- 1/24/2025 12:29:22 PM
- Notice Type
- Sources Sought
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- OFC OF ACQUISITION GRANTS-DENVER DENVER CO 80225 USA
- ZIP Code
- 80225
- Solicitation Number
- 140G0225Q0016
- Response Due
- 1/31/2025 11:00:00 AM
- Archive Date
- 02/15/2025
- Point of Contact
- Keuma, Kekila, Phone: 0000000000
- E-Mail Address
-
kkeuma@usgs.gov
(kkeuma@usgs.gov)
- Description
- SOURCES SOUGHT: This is a SOURCES SOUGHT NOTICE. The U.S. Geological Survey is conducting a MARKET SURVEY to determine the interest and capability of any firm eligible to compete under NAICS code 334516 for an upcoming requirement to provide a Water Shaking Table. THIS IS NOT A SOLICITATION. ALL COST ASSOCIATED WITH PROVIDING INFORMATION AS REQUESTED BY THIS SOURCES SOUGHT NOTICE SHALL BE THE RESPONSIBILITY OF THE CONTRACTOR. Submission is voluntary. Specifications: GENERAL REQUIREMENTS - Maximum capacity must be 75kg/hour. - Equipment Weight must be 160 kilograms. - Packed Gross weight must be 335 kilograms. - Equipment Dimensions must be (in cm): - 242 cm x 96.5 x 130. Must be shipped partially assembled, in a timber case. ELECTRICAL REQUIREMENTS - Motor Kilowatts must be 0.37 with 3 Phase AC - Supply Voltage must be 110V 60Hz with AC Inverter - Motor Speed must be 1410 rpm. MOUNTING REQUIREMENTS - Mounting must have 4 adjustable mounts MECHANICAL DETAILS - Stroke Length Operating Range, mm: - 7 � 11. - Stroke Frequency must be 200 and 300 rpm. LUBRICATION REQUIREMENTS - Head Motion Oil Specification: - SAE 20W/50. - Head Motion Oil Capacity: about 0.5 liters. - Must use general purpose grease TABLE DECK REQUIREMENTS - Dimensions of Deck must be 128 cm L x 64 cm W. - Weight of Deck must be 27 kilograms. - Deck Material must be fiberglass. - Deck Cover color must be buff. - Deck Riffle Material must be a smooth hard gel coat. - Deck Riffle Pattern must have both a Fine Sand (<250micron), and a Coarse sand (<1000 + 250micron) option. - Feed Box must be 0.6 cm x 1.2cm diameter with Holes at - 3 cm centers - Wash Water Pipe must be 1. 5cm diameter made of Plastic tube with 0.3cm holes. - at 2.5cm centers - Wash water rate must be 2 � 8 liters/min. - Adjustable Tilt must be 0 � 9 Degrees. - Adjustable Slope must be 0.2 to Minus 0.8 Degrees. Responses to this announcement are requested from (1) Indian Small Business Economic Enterprise (2) SBA certified Small Business HubZone firms; (3) Small Business firms certified by a Small Business Administration (SBA) district or regional office for participation in the 8(a) program; (4) Service-Disabled Veteran-Owned small Business firms; (5) Small Businesses; (6) Large Businesses In response to this announcement, please indicate your firm's socioeconomic status (e.g. ISBEE, small business, service-disabled veteran-owned, women owned, HUBZone, etc.) This information will assist the Government in determining how small businesses can fit into the acquisition strategy. A firm is considered small under NAICS code 334516 with a Small Business Size Standard <1,000 employees. Any information submitted is voluntary. If sufficient interest and capability is not received from firms in categories (1) through (5) above, any solicitation may be issued as unrestricted without further consideration. Interested business firms shall submit (1) NAME, ADDRESS, and PHONE NUMBER OF THE FIRM (including SAM UEI NUMBER); (2) a CAPABILITY STATEMENT including (a) RECENT (within the last three fiscal years) RELEVANT (similar projects to this requirement) performance history (identify the name of the owner and their point(s) of contact with telephone and fax numbers, e-mail addresses; and (b) in what capacity (e.g., prime, subcontractor etc.) they performed the work; and (3) their SIZE STATUS. Your company must have a SAM Unique Identifier number and be registered on-line at the System for Award Management (SAM). All responses must be submitted NLT January 31st, 2025 at 5:00pm MST via e-mail to: KKeuma@usgs.gov. This is NOT a Request for Proposal (RFP) or Invitation for Bid (IFB) and does not constitute any commitment by the Government. Responses to this sources sought notice will be used by the Government to make appropriate acquisition decisions. All interested sources must respond to future solicitation announcements separately from responses to this market survey. Any solicitation that may be issued will be posted on the SAM.gov website and no paper copies will be provided.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/b5f1d278aa174309830a97b0e4b4b847/view)
- Record
- SN07323128-F 20250126/250124230104 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |