SOURCES SOUGHT
41 -- New Equipment Ice Machine Condenser Ice Bin
- Notice Date
- 1/17/2025 1:59:21 PM
- Notice Type
- Sources Sought
- NAICS
- 333415
— Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing
- Contracting Office
- 260-NETWORK CONTRACT OFFICE 20 (36C260) VANCOUVER WA 98662 USA
- ZIP Code
- 98662
- Solicitation Number
- 36C26025Q0200
- Response Due
- 1/24/2025 5:00:00 PM
- Archive Date
- 02/07/2025
- Point of Contact
- Nick Heintz, Contract Specialist, Phone: 509-434-7000 EXT 2148
- E-Mail Address
-
Nicholas.Heintz@va.gov
(Nicholas.Heintz@va.gov)
- Awardee
- null
- Description
- Page 6 of 6 Ice Machine, including Condenser, Ice Bin, & Installation, VA Southern Oregon Rehabilitation Center & Clinics Health Center White City, Oregon (VA SORCC) Veterans Affairs THIS IS A SOURCES SOUGHT NOTICE ONLY The purpose of this Sources Sought Announcement is for market research to make appropriate acquisition decisions and to gain knowledge of potential qualified vendors. The Department of Veterans Affairs (VA), Network Contracting Office (NCO) 20, is conducting market research to any social economic small business category, small business, or other then small business vendors that are capable and authorized to fulfill this requirement. White City, Oregon VAMC is seeking to procure Hoshizaki KMS-2000MLJ Serenity Series Cuber Ice Machine for use at their White City VAMC facility. This is an unrestricted/open market sources sought notification. This request is for a Brand Name or Equal. Manufacturer and/or which can provide the following necessary item(s) or equal to item meeting the below salient characteristics. Delivery & installation of a brand name or equal to a Hoshizaki KMS-2000MLJ Serenity Series Cuber Ice Machine. Salient Characteristics: Ice Maker and Accessories DELIVERY LOCATION Bldg. 225A Warehouse VA SORCC 8495 Crater Lake Hwy. White City, OR 975032 ACCESSORIES or OPTIONS Must Have: Ice Maker Brazed Line Sets Remote Condenser Tubing Kit Ice Bin Universal Top Kit DIMENSIONS Must Be: Ice Machine Width: 29 to 31 Depth: 23 to 25 Height: 30 to 33 Remote Condenser Width: 61 to 63 Depth: 20 to 22 Height: 44 to 46 Ice Bin Width: 47 to 49 Depth: 40 to 42 Height: 59 to 61 Warranty( In addition to (52.212-4) Must Have: Certified trained product line maintenance facility within 20 miles installation site Icemaker Three years: parts and labor warranty on the entire machine Five years: parts and labor warranty on evaporator Panels easily removed and all components accessible for service Remote Condenser Three year: Parts & Labor on entire unit Five year: Parts on; air-cooled condenser coil Five year: Parts on; compressor Ice Bin Five year: Parts & Labor PERFORMANCE REQUIREMENTS Must Have: Compatible ice storage bin with mount Ice Machine on top Compatible remote condenser with Ice Machine Ice Machine Individual crescent cube Stainless Steel Evaporator Cycle Saver design Up to 1938 lbs. of ice production per 24 hrs. Durable stainless steel exterior Protected by H-Guard Plus Antimicrobial Agent EverCheck alert system No heat, less noise CFC/HFC free foam Operating Limits: Ambient Temp Range 45 - 100°F Water Temp Range 45-90°F Water Pressure 10-113 PSIG Panels easily removed and all components accessible for service. Remote Condenser Must Have: Quiet operation Improved efficiency: Energy saving Weather resistant cabinet Refrigerant Charge Amount: 7.1 oz. Net weight: No more than 175 lbs Operating Limits: Ambient Temp Range -20° - 122°F Ice Bin Must Have: Ice storage capacity from 1148 lbs. to 1605 lbs. Easy cleaning Foamed-in-place polyurethane insulation, in all bin walls and bottom, providing maximum ice preservation Baffle design for increased ice accessibility View windows for inspection and thermal break Pouch style insulated door for limited condensation while providing maximum access and minimal spillage 6 - 10 adjustable stainless steel legs Cubic Volume: 36 fl³ to 38 fl³ POWER NEEDS Must have: Icemaker Voltage range: 187-253V Remote Condenser Voltage range: 187-253V MATERIAL and COLOR Must Have: Ice maker Stainless-steel exterior construction Protected by H-Guard Plus Antimicrobial Agent Remote Condenser Weather resistant cabinet Ice Bin Protected by H-Guard Plus Antimicrobial Agent Seamless polyethylene bin liner INSTALLATION INFO Must provide installation of new equipment, to include freon, misc. parts/evac/brazing and labor to install equipment. The condenser must be installed on the roof of the building. (Crane needed to Lift condenser to the roof) The Ice machine must be placed on top of the ice bin. The lines are currently installed for condenser connection to ice machine. Must provide installation of condenser on top of Ice Bin. Must provide removal of current equipment. Ice Machine Must allow 24 clearance in both front and rear for proper air circulation and ease of maintenance/service. Must have Ice Maker water supply line: Minimum 3/8 Nominal ID Copper Water Tubing or Equivalent Must have Ice Maker Drain Line: Minimum ¾ Nominal ID Hard Pipe or Equivalent IMAGE Potential contractors shall provide, at a minimum, the following information to Nick Heintz -Nicholas.Heintz@VA.gov under the Subject Line: Ice Maker soon as available, but no later than 01/24/2025 5PM PST. Response to include: 1) Company name, address, and point of contact, phone number, e-mail address, and SAM UEI. 2) Please identify your company s size (and item manufacture sized) in comparison to the anticipated North American Industry Classification System (NAICS) code 333415. To be considered a small business your company must have fewer than 1,250 employees. This notice is to determine the marketplace for this specific requirement. Please check one of the following: [ ] yes [ ] no Service Disabled Veteran Owned Small Business (SDVOSB) [ ] yes [ ] no Veteran Owned Small Business (VOSB) [ ] yes [ ] no Proposed item manufacture [ ] yes [ ] no Small Business Manufacturers [ ] yes [ ] no All other Small Business (SB) [ ] yes [ ] no Other than Small Business 5) Equipment must be new, no used or refurbished equipment accepted. If not the item manufacture, please provide a proof of reseller letter from manufacturer. Manufacture warranty requirements must be carried over from the OEM. 6) This is a brand name or equal requirement. As such, the salient characteristics reflect the physical, functional, or performance characteristics that equal products must meet to satisfy the Government s needs. To be considered for any potential solicitation, offers of equal products, including equal products of the brand name manufacturer, must: (a) Meet the salient physical, functional, or performance characteristic specified in this sources sought; clearly identify the item by Brand name, if any and make/model number. (b) Include descriptive literature such as illustrations, drawings, or a clear reference to descriptive data or information available that identifies that the equal item meets or exceeds the salient characteristics required by the Government. (7) The Buy American Act provides a preference for domestic end products for supplies within the United States. It is anticipated this requirement will include FAR Clause 52.225-1 and 52.225-2. In accordance with FAR Provision 52.225-2, please indicate the country of origin for the proposed item(s). Any Service-Disabled Veteran Owned Businesses or Veteran Owned Businesses who respond to a solicitation on this project must be registered with the Small Business Administration registration for VetCert Registry located at Veteran Small Business Certification (sba.gov). The Government is not obligated to, nor will it pay for or reimburse any costs associated with responding to this source sought notice. This notice shall not be construed as a commitment by the Government to issue a solicitation or ultimately award a contract, nor does it restrict the Government to a particular acquisition approach. The Government will in no way be bound to this information if any solicitation is issued. Notice to Potential Offerors: All Offerors who provide goods or services to the United States Federal Government must be registered in the System Award Management (SAM located on the web at www.sam.gov). It is desirable that any Offeror to have completed their business Online Representations and Certifications Application in the System for Award Management (SAM). All respondents must identify any proprietary information that should be protected by the Government and indicate whether submitted information needs to be returned to the respondents. Any proprietary information must be clearly marked at the top and bottom of each page along with any instructions of how the government should handle the information, use, release, or return. Response due date is 01/24/2025 no later than 5:00pm PST. Please reply to Nick Heintz -Nicholas.Heintz@va.gov, Subject Line: Ice Maker DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/9659ec1d7a4746dda08d8c14688b66ca/view)
- Place of Performance
- Address: White City VA Medical Center 8495 Crater Lake Hwy, White City 97503
- Zip Code: 97503
- Zip Code: 97503
- Record
- SN07317070-F 20250119/250117230106 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |