Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF NOVEMBER 16, 2024 SAM #8390
SOLICITATION NOTICE

A -- Set of broadband high-power mirrors on silicon substrates

Notice Date

11/14/2024 8:02:35 PM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

332812 — Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers
 

Contracting Office

SLAC Natl Accel Lab -DOE Contractor Menlo Park CA 94025 USA
 

ZIP Code

94025
 

Solicitation Number

Req-351686
 

Response Due

11/26/2024 5:00:00 PM
 

Archive Date

11/27/2024
 

Point of Contact

Bernadette Espiritu, Phone: 6509262838
 

E-Mail Address

espiritu@slac.stanford.edu
(espiritu@slac.stanford.edu)
 

Description

SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management, and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. SLAC has a requirement for a U.S. domestic end item source of the following product: A set of broadband high-power mirrors on silicon substrates with enhanced silver coating. The coating is optimized for high reflectivity in 650-1250 nm spectral range. Qty: 2 - Coating service (for substrates in lines 2-7): Enhanced silver with low GDD; Angle of incidence: 0 degree;Reflectivity > 98% in 650 � 1300 nm range and > 99% in 800-1100 nm range Qty: 4 - Plano-concave silicon substrate (with the coating, line 1, on the curved side) Material: silicon monocrystalline Diameter: 3 inches Thickness: 19 mm Radius of curvature: -2000 mm Surface form deviation: 3/-(0.2) (DIN ISO 10110-5) Surface roughness: < 1 nm Wedge < 5� Qty: 3 � Plano-concave silicon substrate (with the coating, line 1, on the curved side) Material: silicon monocrystalline Diameter: 2 inches Thickness: 12.7 mm Radius of curvature: -2000 mm Surface form deviation: 3/-(0.2) (DIN ISO 10110-5) Surface roughness: < 1 nm Wedge < 5� Qty: 3 - Plano-concave silicon substrate (with the coating, line 1, on the curved side) Material: silicon monocrystalline Diameter: 2 inches Thickness: 12.7 mm Radius of curvature: -10,000 mm Surface form deviation: 3/-(0.2) (DIN ISO 10110-5) Surface roughness: < 1 nm Wedge < 5� Qty: 3 - Plano-convex silicon substrate (with the coating, line 1, on the curved side) Material: silicon monocrystalline Diameter: 1 inch Thickness: 6.35 mm Radius of curvature: +1,000 mm Surface form deviation: 3/-(0.2) (DIN ISO 10110-5) Surface roughness: < 1 nm Wedge < 5� Qty: 6 � Plane substrate (with the coating, line 1, on one side) Material: silicon monocrystalline Diameter: 1 inch Thickness: 6.35 mm Surface form deviation: 3/0.2(0.2) (DIN ISO 10110-5) Surface roughness: < 1 nm Wedge < 5� Qty: 6 � Plane substrate (with the coating, line 1, on one side) Material: silicon monocrystalline Diameter: 2 Inches Thickness: 9.5 mm Surface form deviation: 3/0.2(0.2) (DIN ISO 10110-5) Surface roughness: < 1 nm Wedge < 5� Qty: 4 - Tooling costs Customization service to manufacture and coat substrates in lines 2-7 Marking of Proprietary/Confidential Information. Offerors shall properly mark and identify with a restrictive legend or information markings on pages of the proposal that contain Proprietary/confidential information. For Offeror to be eligible for a subcontract award with the University and the U.S. Department of Energy (DOE), Offeror shall be registered with the System for Award Management (SAM). Entities may register at no cost directly at the SAM website: https://www.sam.gov. The resulting purchase order shall be performed in accordance with SLAC National Accelerator Laboratory's Terms and Conditions for Fixed Price Commercial Supplies, and Services dated August 2023 NOTE: The following documents are attached in this solicitation. Buy American Act Certificate Representations and Certification Supplement Terms & Conditions for Fixed Price Commercial Supplies and Services, August 2023 Please provide quoted price, delivery, technical compliance statement and certification to the attention of Bernadette Espiritu espiritu@SLAC.stanford.edu. Payment Terms: Net 30 days Freight terms: FOB Destination Prepaid and Add
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/a98fc2e775cc4ad583cdb6149429d7a9/view)
 

Place of Performance

Address: Menlo Park, CA 94025, USA

Zip Code: 94025

Country: USA
 

Record

SN07264683-F 20241116/241114230105 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |